All

ANDREWS 5-Speed XL Transmission Components Third Gear Mainshaft Second Gear Countershaft, Harley 91 - 95 XL

• Sold individually unless noted

ANDREWS First Gear Set, Close-ratio, made in the usa, Each, 2.61:1, Harley 91 - 95 XL

• Sold individually unless noted

JIMS USA 6-Speed Overdrive Super Kit, Harley 01-06 FX 01-06 FL

• Designed to turn stock 5-speed transmission into a 6-speed
• Reduces vibration that creates wear
• Creates a more relaxing cruising speed
• All gear sets use 2.94:1 close-ratio 1st gear that widens bike's speed range in 1st gear and lessens the rpm drop when shifting into second
• Overdrive 6th gear (.86:1 ratio) lowers engine rpm by almost 475 at 75 mph
• Gaskets and seals included
• Made in the U.S.A.
• Requires speedometer sensor block-off plate kit; if speedometer is not driven from transmission, then two block-off plates kits are required.
• Trap door extends 3/8" farther to right than stock part. Alteration to some parts that attach to or around the trap door may be required.
• Requires speedometer be recalibrated.

2001-2006 FLT/FLHT
2002-2006 FLST/FXST
2001-2005 FXD/FXDWG

JIMS USA Fat 5 5-Speed Overdrive Super Kit, Harley 00-06 FX 00-06 FL

• Gear cluster is installed into a unique chrome trap door
• Designed to slip into stock transmission case
• .886:1 "overdrive" 5th gear
• Compact shifter technology increases width and strength of every gear
• Width increase varies from 18% to 53% depending upon the loads each gear set must carry
• Made in the U.S.A.

JIMS USA Fat 5 5-Speed Overdrive Super Kit, Harley 90-00 FX 90-00 FL 90 - 94 XL

• Gear cluster is installed into a unique chrome trap door
• Designed to slip into stock transmission case
• .886:1 "overdrive" 5th gear
• Compact shifter technology increases width and strength of every gear
• Width increase varies from 18% to 53% depending upon the loads each gear set must carry
• Made in the U.S.A.

Transmission Gear Sets Bt 70/E76 2.44 Low,C Ratio 3Rd W/Forks And Clutches

• High quality gear sets include mainshaft and counter shaft
• See below for availability of ratio low gears
• Close ratio 3rd gear sets

V-FACTOR
2.44 Ratio Complete Gear Kit
Fits Big Twin 1970/Early 1976 & 1936/1969 when used with correct mainshaft
Note: Best suited for light weight X models
(Imported)

Transmission Gear Sets Bt 70/E76,2.60 Low,C Ratio 3Rd W/Forks And Clutches

• High quality gear sets include mainshaft and counter shaft
• See below for availability of ratio low gears
• Close ratio 3rd gear sets

V-FACTOR
2.60 Ratio Complete Gear Kit
Fits Big Twin 1970/Early 1976 & 1936/1969 when used with correct mainshaft
Note: Best suited for heavier FLH models
(Imported)

TRANSMISSION GEAR SETS FOR BIG TWIN 4 SPEED, L77/86

• Available in complete sets for no hassle ordering
• The main drive gears include installed and sized mainshaft bushings
• All gear sets include shift forks and shift clutches

Andrews
Gear Set with 2.60 low & close ratio 3rd
Fits Big Twin 4 speed Late 1977/1986
Set includes installed needle bearings

Trn Gear Set,Close Ratio 1St Fl Models 4 Speed 2.60-1 Ratio Andrews.201145
With Andrews gears, your transmission will last longer, shift faster, and just plain run better. All gears are made from an alloy steel that is stronger than stock. Andrews gears make the difference, it's hard to believe until you experience the difference yourself. Close ratio sets for Big Twin have complete installation instructions.1st Gear Close Ratio Set. 2.60:1 Ratio. The 2.60 is best for the L. It provides higher 1st gear and eliminate 2nd gear clunk. It also permits use of a larger engine sprocket for easier starting. Fits Big Twin 1937/Later when OEM HD 35751-36 21 tooth 2nd gear is used, or our 72629.

Trn Gear Set,Close Ratio 1St Fx Models 4 Speed 2.44-1 Ratio Andrews .201105
With Andrews gears, your transmission will last longer, shift faster, and just plain run better. All gears are made from an alloy steel that is stronger than stock. Andrews gears make the difference, it's hard to believe until you experience the difference yourself. Close ratio sets for Big Twin have complete installation instructions.1st Gear close ratio sets. Ratio 2.44:1. The 2.44 close ratio set is best for X's. This set provides higher 1st gear and eliminate 2nd gear clunk. It also permits use of a larger engine sprocket for easier starting. Fits Big Twin 1937/Later when OEM HD 36751-36 21 tooth 2nd gear is used or our 72629.

Trn Gear Set,W/O Sfts Andrews Bt 36/E76 2.44 Low C-Ratio 3Rd W/Forks & Clutches ..210150

• Available in complete sets for no hassle ordering
• The main drive gears include installed and sized mainshaft bushings
• Available in your choice of stock or close ratio 3rd gear with a 2.44 or a 2.60 ratio low gear
• The 2.44 ratio works best with lightweight X models while the 2.60 ratio works best with heavier FLH models
• All gear sets include shift forks and shift clutches

Andrews
Gear Set with 2.44 low & close ratio 3rd
Fits Big Twin 4 speed 1936/Early 1976

Trn Gear Set,W/O Sfts Andrews Bt 36/E76 2.60 Low & Stock 3Rd With Forks & Clutches .210450

• Available in complete sets for no hassle ordering
• The main drive gears include installed and sized mainshaft bushings
• Available in your choice of stock or close ratio 3rd gear with a 2.44 or a 2.60 ratio low gear
• The 2.44 ratio works best with lightweight X models while the 2.60 ratio works best with heavier FLH models
• All gear sets include shift forks and shift clutches

Andrews
Gear Set with 2.60 low & stock ratio 3rd
Fits Big Twin 4 speed 1936/Early 1976

V-Twin Manufacturing 5-Speed Low Gear Set, 2.94 - Set
5-Speed Close Ratio 2.94 Low Gear Set closes the gap between 1st and 2nd. Adds about 5 m. p.h. of usable 1st gear. Replaces 35025-79C 1st main, 35622-79C 1st countershaft.v-twin.

V-Twin Manufacturing Andrews 4th Gear Set, 1991-up XL - Set
Super Close Ratio 1st, 2nd, 3rd, 4th Y gear sets will put more usable torque where it belongs-at high RPMs. 2 gears per set. Ratio/Gear: 1.158 4th

V-Twin Manufacturing Andrews 5-Speed Low Gear Set, 2.94 - Set
5-Speed Close Ratio 2.94 Low Gear Set closes the gap between 1st and 2nd. Adds about 5 m. p.h. of usable 1st gear. Replaces 35025-79C 1st main, 35622-79C 1st countershaft. andrews.

V-Twin Manufacturing Andrews Stock 1st C-4th Gear Kit, 1979-84 XL - Kit
4-Speed Gear Sets For Sportster are available as kits which include: 1st gears, counter and main, 2 pieces; 2nd gears, counter and main, 2 pieces; 3rd gears, counter and main, 2 pieces; 4th gears, counter and main, 2 pieces: the countershaf

V-Twin Manufacturing Complete Gear Set w 2.94 1st Gears - Set
5-Speed Transmission Internals 12 Piece Gear Sets

V-Twin Manufacturing Motorcycle 5-Speed Transmission Gear Set Stock Ratio fits 1991-2006 Softail - Kit
Motorcycle Transmission Gear Set Stock Ratio

FXST 1991-2006
FLST 1991-2006

V-Twin Manufacturing Stock 1st-4th Gear Kit, L1984-90 All XL XL - Kit
4-Speed Gear Sets For Sportster are available as kits which include: 1st gears, counter and main, 2 pieces; 2nd gears, counter and main, 2 pieces; 3rd gears, counter and main, 2 pieces; 4th gears, counter and main, 2 pieces: the countershaf