All

Adaptor Cable Oe Trn Mt Spdo 3000-4000-6000 Series Only Dakota Digital M# Sen-6012

• The 6000 series speedometer/tachometer displays the speed in miles per hour and the housing measures a mere 4 ¹/₂ long x 1 ⁵/₈ tall x 1 ¹/₂ deep. The control module that is included with the gauge measures 3 ¹/₂ long x 3 ¹/₂ wide x 1 ¹/₂ tall
• The screen features a high brightness dot matrix type vacuum florescent graphic display that has a blackout display when turned off
• ull complement of indicators include turn signal, high beam, neutral, low oil pressure, low battery voltage and engine light for EI equipped models
• The speedometer is easily adjusted for any size tire or gearing configuration and does not require a separate recalibration module
• The tachometer function features an adjustable position single line that can be used as a shift point indicator or a red line indicator
• A self cancelling turn signal feature is built-in for models that incorporate the OEM turn signal cancelling module
• Can be used with an electronic or 12 volt point type ignition system with single or dual fire coil
• Includes instructions and Manufacturer's 2 year warranty

Dakota Digital
Required Sensor
Adapter cable (harness) that is required when using the OEM transmission mounted speedometer sensor
24 lead wire

DRAG SPECIALTIES Front Wheel Speedo Drive Unit, Harley 96-99 FL

• High-quality front wheel speedometer drive units fit a variety of H-D models

DRAG SPECIALTIES Sub-Wire Harness For Electronic Speedo/Tachometer, Amp, Electronic Speedometer, Harley 96-97 FX

• OEM replacement electronic speedometer; includes all OEM gauge functions including check engine light
• Plug-in installation in 99-03 models
• Available in mph or km/h
• Sub-wire harness is required for all other applications listed; available separately; allows plug-in installation of late-style speedometer to 96-98 factory main wire harness

DRAG SPECIALTIES Sub-Wire Harness For Electronic Speedo/Tachometer, Amp, Electronic Speedometer, Harley 98-98 FX 98-98 FL

• OEM replacement electronic speedometer; includes all OEM gauge functions including check engine light
• Plug-in installation in 99-03 models
• Available in mph or km/h
• Sub-wire harness is required for all other applications listed; available separately; allows plug-in installation of late-style speedometer to 96-98 factory main wire harness

DRAG SPECIALTIES Sub-Wire Harness For Electronic Speedo/Tachometer, Harley 96-97 FL

• OEM replacement electronic speedometer; includes all OEM gauge functions including check engine light
• Plug-in installation in 99-03 models
• Available in mph or km/h
• Sub-wire harness is required for all other applications listed; available separately; allows plug-in installation of late-style speedometer to 96-98 factory main wire harness

DRAG SPECIALTIES Sub-Wire Harness For Electronic Speedo/Tachometer, Harley 96-98 FX 96-98 FL

• OEM replacement electronic speedometer; includes all OEM gauge functions including check engine light
• Plug-in installation in 99-03 models
• Available in mph or km/h
• Sub-wire harness is required for all other applications listed; available separately; allows plug-in installation of late-style speedometer to 96-98 factory main wire harness

KOSO NORTH AMERICA Replacement Speed Sensor For KOSO Speedometers OEM-Style

• Replacement speed sensors available in two versions: H-D OEM-style transmission speed sensor or speed sensor with 79" cable

Rear Wheel Speedometer Sensor Uw #48062 Or #48063 Only Mt On Rr Axle Spacer #Sen-1018

• Odyssey Series II, 2 ¹/₁₆ O.D.
• Designed with the chopper in mind, these gauges do not require any hard to hide external module
• Gauges are sold separately and will require the appropriate housing cover and mounting bracket as needed
• Speedometers will also require the appropriate sensor, adapter or sending unit as listed
• The gauges feature high visibility digital numerals that are easy to read in full sunlight and include a non-glare high contrast lens
• All calibration is done with the function button
• The tachometer features an adjustable warning point to flash the gauge readout and includes a high RPM readout

Dakota Digital
Required Rear Axle Spacer Mounted Sensor
or models that do not have any provisions for a transmission sensor or a speedometer cable
Mounts to the 1 ¹/₈ O.D. Rear Axle Spacer and picks up off of the 5 Steel Sprocket or Pulley Mounting Bolts
71 lead wire, Sensor is Polished

Spdo Sensor Adaptor Harness Flhr 95/L* & Tc 99/L* 36" Long Uw Oe Sensor & Uw Hly-2000

• 2000 Series
• Can be used with carbureted or fuel injected models
• Includes mounting hardware for use with stamped steel type dash 1947/1967 or die cast type dash 1968/Later
• Push-button speedometer calibration for when final drive ratio or tire diameter has been altered
• Works with electronic or 12 volt point type ignition systems with single or dual fire coil
• Built-in speed output signal for models equipped with an automatic turn signal cancel module or cruise control
• Display intensity can be reduced for night time use if a remote switch is installed
• Maximum speed readout is 255 MPH
• Maximum odometer readout is 99,999.9 and the maximum tripometer readout is 999.9
• Super bright fluorescent teal green displays are easy to see in direct sunlight
• Includes 18 speed adapter 48618 for use with 1996/Later models equipped with electronic speed sensor
• Includes non-glare scratch resistant lens with chrome trim ring
• 2 year warranty against manufacturer defects
• Includes instructions

Note: Speedometers for 1995/Later models can be used with the OE transmission sensor when used with the included adapter. All other applications require a specialized sensor listed below.

Display Features:

• Quick response bar graph type tachometer with adjustable shift point indicator (can be used on engines with 1 to 15 cylinders)
• The tachometer functions between 350 & 8,000 RPMs
• Resetable countdown service meter (with warning)
• Hour meter
• Includes a feature to recall your high speed and RPM
• unctions include 0-60 MPH timer, ¹/₄ mile timer and ¹/₄ mile speed
• Integrated Voltmeter (with low voltage warning)
• Includes following indicators: turn signal, high beam, neutral, security warning, gear position indicator (compatible with 3/6 speed transmissions), adjustable RPM warning indicator with an output for an external shift light, low oil pressure, wait to start (for fuel injected models) and check engine (for fuel injected models)
Dakota Digital
36 long Adapter Harness
Required for Road King 1995/Later & Twin Cam 1999/Later (use with OE transmission spacer)

Spdo Sensor Adaptor Harness Fxdwg 95/98 & St 96/99 18"Long Uw Oe Sensor & Uw Hly-2000

• or use in stamped steel or cast dash
• Manual & automatic calibration
• Speedo sensor sold separately
• Built in indicator lights, turn signal, oil pressure, neutral, & high beam
• See additional images for included mounting hardware
• Requires Sensor adapter harness, part# 48618

Dakota Digital
Required Sensor Adapter Harness

Speedometer Drive,Front Wheel Fx 1980 Only(Ex Fxwg)W/19" Whl Replaces Hd 67124-80
High quality Speedometer Drives for front wheel drive speedometers.V-FACTOR
Right Side Drive
Fits X 1980 with 19 wheel (except XWG)
Has .250 wide seal spacer
Replaces HD# 67124-80
(Imported)

Speedometer Drive,Front Wheel Fx,Fxr,Dyna,Spt 1984/94 W/19" Wheel Replaces Hd 67127-84A
High quality Speedometer Drives for front wheel drive speedometers.V-FACTOR
Left Side Drive
Fits X, FXR, Dyna & Sportster with 19 front wheels 1984/1994
Has .350 wide seal spacer
Replaces HD# 67127-84A
(Imported)

Speedometer Drive,Transmission Fl 69/80,Fx 71/72,Fxwg 80/83 23 Tooth Rpls Hd 67130-69
V-FACTOR
Cast Finish Drive
Fits L, FLH 1969/1980, X 1971/1972, XWG 1980/1983
23 tooth, 1:1 ratio
Replaces HD# 67130-69
(Imported)

Speedometer Sensor Cover Cp Big Twin 94/L* & Spt 95/L* Manufactured From Billet Alum

• Easily installs over the OEM speedometer sensor for instant gratification
• CNC machined from billet aluminum
• Requires longer allen screw for installation

V-FACTOR
Fits Big Twin 1994/Later & Sportster 1995/Later
(Imported)

Speedometer Sensor Custom Applications Programmable

• Great for replacing your OEM sensor when it has gone bad
• Also use on new builds when running an electronic speedometer

V-FACTOR
Fits Programmable - All
Custom HDReplacement

Speedometer Sensor Dyna 1995/2005 Rpls Hd 74420-94

• Great for replacing your OEM sensor when it has gone bad
• Also use on new builds when running an electronic speedometer

V-FACTOR
Fits XD 1995/2005
Replaces HD# 74420-94

Speedometer Sensor Softail 1996/1999 Rpls Hd 74437-96

• Great for replacing your OEM sensor when it has gone bad
• Also use on new builds when running an electronic speedometer

V-FACTOR
Fits XST 1996/1999
Replaces HD# 74437-96

Speedometer Sensor Sportster 1995/2003 Rpls Hd 74402-95

• Great for replacing your OEM sensor when it has gone bad
• Also use on new builds when running an electronic speedometer

V-FACTOR
Fits XL 1995/2003
Replaces HD# 74402-95

Speedometer,Inductive Speed Sensor,Use W/2000 Series Spdo Reads Gr T,Pulley Bolts

• 2000 Series
• Can be used with carbureted or fuel injected models
• Includes mounting hardware for use with stamped steel type dash 1947/1967 or die cast type dash 1968/Later
• Push-button speedometer calibration for when final drive ratio or tire diameter has been altered
• Works with electronic or 12 volt point type ignition systems with single or dual fire coil
• Built-in speed output signal for models equipped with an automatic turn signal cancel module or cruise control
• Display intensity can be reduced for night time use if a remote switch is installed
• Maximum speed readout is 255 MPH
• Maximum odometer readout is 99,999.9 and the maximum tripometer readout is 999.9
• Super bright fluorescent teal green displays are easy to see in direct sunlight
• Includes 18 speed adapter 48618 for use with 1996/Later models equipped with electronic speed sensor
• Includes non-glare scratch resistant lens with chrome trim ring
• 2 year warranty against manufacturer defects
• Includes instructions

Note: Speedometers for 1995/Later models can be used with the OE transmission sensor when used with the included adapter. All other applications require a specialized sensor listed below.

Display Features:

• Quick response bar graph type tachometer with adjustable shift point indicator (can be used on engines with 1 to 15 cylinders)
• The tachometer functions between 350 & 8,000 RPMs
• Resetable countdown service meter (with warning)
• Hour meter
• Includes a feature to recall your high speed and RPM
• unctions include 0-60 MPH timer, ¹/₄ mile timer and ¹/₄ mile speed
• Integrated Voltmeter (with low voltage warning)
• Includes following indicators: turn signal, high beam, neutral, security warning, gear position indicator (compatible with 3/6 speed transmissions), adjustable RPM warning indicator with an output for an external shift light, low oil pressure, wait to start (for fuel injected models) and check engine (for fuel injected models)
Dakota Digital
Universal Sensor
Designed to read off to the transmission sprocket teeth or the rear sprocket teeth (mounting bracket must be fabricated)

Speedometer,Rear Whl Sensor Use W/2000 Series Spdo,Sensor Mt On Rr Axle Spacer, Rig/St

• 2000 Series
• Can be used with carbureted or fuel injected models
• Includes mounting hardware for use with stamped steel type dash 1947/1967 or die cast type dash 1968/Later
• Push-button speedometer calibration for when final drive ratio or tire diameter has been altered
• Works with electronic or 12 volt point type ignition systems with single or dual fire coil
• Built-in speed output signal for models equipped with an automatic turn signal cancel module or cruise control
• Display intensity can be reduced for night time use if a remote switch is installed
• Maximum speed readout is 255 MPH
• Maximum odometer readout is 99,999.9 and the maximum tripometer readout is 999.9
• Super bright fluorescent teal green displays are easy to see in direct sunlight
• Includes 18 speed adapter 48618 for use with 1996/Later models equipped with electronic speed sensor
• Includes non-glare scratch resistant lens with chrome trim ring
• 2 year warranty against manufacturer defects
• Includes instructions

Note: Speedometers for 1995/Later models can be used with the OE transmission sensor when used with the included adapter. All other applications require a specialized sensor listed below.

Display Features:

• Quick response bar graph type tachometer with adjustable shift point indicator (can be used on engines with 1 to 15 cylinders)
• The tachometer functions between 350 & 8,000 RPMs
• Resetable countdown service meter (with warning)
• Hour meter
• Includes a feature to recall your high speed and RPM
• unctions include 0-60 MPH timer, ¹/₄ mile timer and ¹/₄ mile speed
• Integrated Voltmeter (with low voltage warning)
• Includes following indicators: turn signal, high beam, neutral, security warning, gear position indicator (compatible with 3/6 speed transmissions), adjustable RPM warning indicator with an output for an external shift light, low oil pressure, wait to start (for fuel injected models) and check engine (for fuel injected models)
Dakota Digital
Polished Aluminum Rear Axle Spacer Mounted Sensor
Clamps to the 1 ¹/₈ O.D. spacer and reads off of the sprocket/pulley bolts

Transmission Spdo Sending Unit Uw #48062 Or #48063 Only, Most 96/L* Big Twin, Mfg#Sen-1017

• Odyssey Series II, 2 ¹/₁₆ O.D.
• Designed with the chopper in mind, these gauges do not require any hard to hide external module
• Gauges are sold separately and will require the appropriate housing cover and mounting bracket as needed
• Speedometers will also require the appropriate sensor, adapter or sending unit as listed
• The gauges feature high visibility digital numerals that are easy to read in full sunlight and include a non-glare high contrast lens
• All calibration is done with the function button
• The tachometer features an adjustable warning point to flash the gauge readout and includes a high RPM readout

Dakota Digital
Required Transmission Type Sensor
or most Big Twin 1996/Later and aftermarket transmissions designed for this type of inserted sensor
71 lead wire, Sensor is Machined Finish

Trn Type Sensor Dakota Digital 3000-4000-6000 Series Only Bt 96/L*Amkt Trn M# Sen-6017

• The 6000 series speedometer/tachometer displays the speed in miles per hour and the housing measures a mere 4 ¹/₂ long x 1 ⁵/₈ tall x 1 ¹/₂ deep. The control module that is included with the gauge measures 3 ¹/₂ long x 3 ¹/₂ wide x 1 ¹/₂ tall
• The screen features a high brightness dot matrix type vacuum florescent graphic display that has a blackout display when turned off
• ull complement of indicators include turn signal, high beam, neutral, low oil pressure, low battery voltage and engine light for EI equipped models
• The speedometer is easily adjusted for any size tire or gearing configuration and does not require a separate recalibration module
• The tachometer function features an adjustable position single line that can be used as a shift point indicator or a red line indicator
• A self cancelling turn signal feature is built-in for models that incorporate the OEM turn signal cancelling module
• Can be used with an electronic or 12 volt point type ignition system with single or dual fire coil
• Includes instructions and Manufacturer's 2 year warranty

Dakota Digital
Required Sensor
Transmission type sensor for most Big Twin 1996/Later and aftermarket transmissions designed for this type of inserted sensor
71 lead wire (Sensor is machined finish)

V-Twin Manufacturing Electronic Speedometer Sensor Unit for 1995-up FLT - Sold Each
Electronic Speedo Sensor Unit. Years/ Model: 1995-up FLT

V-Twin Manufacturing Electronic Speedometer Sensor Unit for 1995-up FXD - Sold Each
Electronic Speedo Sensor Unit. Years/ Model: 1995-up FXD

V-Twin Manufacturing Electronic Speedometer Sensor Unit for 1996-1999 FXST - Sold Each
Electronic Speedo Sensor Unit. Years/ Model: 1996-99 FXST

V-Twin Manufacturing Electronic Speedometer Sensor Unit for 2000-up FXST - Sold Each
Electronic Speedo Sensor Unit. Years/ Model: 2000-up FXST

V-Twin Manufacturing Left Side Speedometer Drive, FLT 1996-1999, 67101-96 - Sold Each

Left side speedometer drive unit is for a 2240:60 ratio and the front wheel only.
Speedometer drive has a .750 axle hole. Spacer is .442 wide and 1.248 overall length.
OEM: 67101-96

FLT 1996-1999