All

ALLOY ART Gooden-Tite Riser Bushings Set, Plastic, Riser Bushing Kit

• Revolutionary design reduces vibration better than any other riser bushing on the market
• Sold in sets of four
• Made in the U.S.A.

ATHENA Pair of Carbon Fiber Reed Valves (.29)

• High-quality carbon fiber reed valves
• Sold in pairs

ATHENA PISTON KT YAMAHA/MALAGUTI, bore 47.60mm, Aluminum, Kit, Replacement, Piston Kit

• Kits come complete with aluminum cylinder (with a nickel carbide-plated 47.66mm bore), cylinder head, piston assembly (piston, rings, 10mm wrist pin and circlips), carbon reeds and all required top-end gaskets
• Optional high-performance crankshafts (sold separately) replace OEM and are manufactured to Athena's highest standards
• Replacement top-end gasket kits and piston kits also available separately

NOTE: It is recommended that Athena's 17.5mm or 19mm Scooter carburetor be used with these bolt-on big bore kits. See Fuel Systems section.

ATHENA Top End Gasket, Set, specific application, Valve Cover Gasket

• Superior quality gasket sets from Athena S.p.A
• Head gaskets feature rubber-coated spring steel construction
• Soft steel base gaskets are rubber coated
• Steel core materials feature high spring-back and superior tensile strength
• Revolutionary transparent coating guarantees a perfect seal even at extremely high temperatures
• High-temperature blue silicone beading on most critical flat gaskets
• Top-end gasket kits include all necessary gaskets to rebuild the top end of the motor from the base gasket up, including all rubber gaskets such as valve cover gaskets, O-rings and valve stem seal
• Complete gasket kits include all necessary gaskets to rebuild the top and lower part of motor, including all rubber gaskets and O-rings, top and bottom

BARON Comet Milled Ignition Cover, Chrome, made in the usa, Aluminum, specific application

• Billet aluminum covers replace your stock-branded ignition cover for a custom look
• Beautifully machined, hand-polished and chromed
• Available in Smooth or Comet Milled designs
• Installs easily in minutes
• Made in the U.S.A.

BARON Foot Control Extension, made in the usa, specific application

• Properly repositions rider foot controls for easy, comfortable access
• Adds 13/4" of legroom to your Warrior
• Kits are complete with necessary hardware and simple instructions
• Made in the U.S.A.

BARON MIXTURE SCREW KAW, made in the usa

• Make adjusting your pilot jet's air/fuel mixture a breeze with this unique finger-turn pilot jet mixture screw
• Allow you to easily adjust air-fuel ratio for weather and altitude
• Enhance fuel efficiency while improving cold start-up and low end performance
• Do away with tiny screwdrivers and crawling around on your knees with this easy-to-operate part
• Sold individually
• Made in the U.S.A.

NOTE: Installation requires removal of mixture plug if your stock mixture screw has not been uncovered.

BARON MIXTURE SCREW YAM, made in the usa

• Make adjusting your pilot jet's air/fuel mixture a breeze with this unique finger-turn pilot jet mixture screw
• Allow you to easily adjust air-fuel ratio for weather and altitude
• Enhance fuel efficiency while improving cold start-up and low end performance
• Do away with tiny screwdrivers and crawling around on your knees with this easy-to-operate part
• Sold individually
• Made in the U.S.A.

NOTE: Installation requires removal of mixture plug if your stock mixture screw has not been uncovered.

BARON Passenger Sport Board, Black, Chrome

• Eliminate the whine from your passenger seat
• These floorboards offer extended and improved legroom, as well as multiple adjustment angles for better foot support
• Passengers benefit from the board's ability to tilt and relieve pressure on the back of their thighs
• Floorboards are brightly chrome plated and feature a thick rubber footpad
• Mounting brackets required; sold separately according to bike fitment (see below)
• Made in the U.S.A.

BARON Riser Extensions, Raw, made in the usa, Aluminum, Pair, pullback sweep 1.5", specific application

• What every Venture rider wants and needs
• Pulls handlebar back 11/2" closer to the rider
• Relieves back, neck, shoulder and arm pain
• Improved grip point provides additional leverage
• Makes bike easier to control and steer
• Works with stock controls, lines and cables
• This accessory allows use of Baron Starbar handlebar on Venture models (sold separately)
• Raw finish
• Easy install with supplied instructions
• Made in the U.S.A.

NOTE: These extensions are not for use with Yamaha's accessory Chrome Dash Cover, or Yamaha's one-piece riser caps.

BARON Smooth Ignition Cover, made in the usa, Aluminum, specific application

• Billet aluminum covers replace your stock-branded ignition cover for a custom look
• Beautifully machined, hand-polished and chromed
• Available in Smooth or Comet Milled designs
• Installs easily in minutes
• Made in the U.S.A.

BRITE-LITES 2 Post Mount Connector Wiring Harness, Plug-N-Play, wattage 300

• Brite Lites Deluxe wiring harness complete with relay, fusable link and lighted switch
• Designed for plug-n-play connections on LED light bars, but works with all LED HID lights

BRITE-LITES 4" Driving/Fog LED Bars, amps .3, Clear, Black, Aluminum, Pair, 4" L, Lightbar

• Projection lamp uses Hi-Power white LEDs for auxiliary lighting, interior lighting, or driving lights
• No warm-up, lights are instant on/off
• Long life, rated to over 50,000 hours
• Oversized heat-sink
• Cast aluminum body with stainless steel hardware
• Standard 2-wire connection to any 12V DC input

BRITE-LITES 6" LED Driving/Fog Lights, amps 1, Clear, Black, Aluminum, Each, Lightbar, watts 18

• Projection lamp uses Hi-Power white LEDs for auxiliary lighting, interior lighting, or driving lights
• No warm-up, lights are instant on/off
• Long life, rated to over 50,000 hours
• Oversized heat-sink
• Cast aluminum body with stainless steel hardware
• Standard 2-wire connection to any 12V DC input

COBRA Black Saddlebag Protectors/Supports, Powder-Coated, Rear, made in the usa, specific application

• Keep throw-over saddlebags from getting tangled in the rear wheel
• Attach to existing mounting points for easy installation; custom-fit to each bike
• Made of thick steel tubing bent to fit each bike model and then polished and powder coated
• Safety feature for riders and saddlebags alike
• Made in the U.S.A.

CRG Arrow Mirror Replacement Glass, made in the usa, Each, Mirror Glass Kit

• Unique variable height/width multi-position mounting system
• Detent hinging allows for added clearance in tight conditions and reduces width for bike storage or transfer
• CNC-machined from 6061 T-6 billet aluminum
• Patented aerodynamic design with anodized aluminum housing
• Automotive-quality convex mirror glass
• Stainless steel hardware
• Fit for 7/8" handlebars; optional internal adapters available for 1" and 7/8" handlebars
• Patent-pending
• Made in the U.S.A.

DG PERFORMANCE 1" Quiet Core V2 Exhaust Insert, made in the usa, Each, specific application

• Reduce exhaust sound by one to six decibels
• Work with DG V2 and R-series mufflers
• Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
• Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
• Sold each

DG PERFORMANCE 1.25" Quiet Core V2 Exhaust Insert, made in the usa, Each, specific application

• Reduce exhaust sound by one to six decibels
• Work with DG V2 and R-series mufflers
• Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
• Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
• Sold each

DG PERFORMANCE 1.375" Quiet Core V2 Exhaust Insert, made in the usa, Each, specific application

• Reduce exhaust sound by one to six decibels
• Work with DG V2 and R-series mufflers
• Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
• Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
• Sold each

DG PERFORMANCE 1.5" Quiet Core V2 Exhaust Insert, made in the usa, Each, specific application

• Reduce exhaust sound by one to six decibels
• Work with DG V2 and R-series mufflers
• Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
• Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
• Sold each

DRIVEN RACING Mantis Infrared Temperature Sensor, made in the usa, Each, Thermometer

• Mantis is a ground-breaking new electronic tire temperature sensor, designed specifically for motorcycles
• Using a sophisticated infrared sensor, the Mantis reads and displays to the rider front and rear tire surface temperatures in real time
• Tire surface temperature is a crucial variable in maximizing the tire s ability to adhere to the road surface
• Knowing the tire s temperature in real time allows the rider to make adjustments that will keep the tires operating in their optimal temperature range; riding with your tires at their optimal temperature increases grip and extends the tire s life
• Installing the Mantis digital tire temperature sensor is a simple matter, requiring only a few hand tools, and can be installed by an experienced technician in less than 30 minutes
• Maintenance on the Mantis is fast and easy; prior to riding on the track, use a clean cotton swab to remove dirt and debris from the lens on each sensor
• The Mantis non-contact infrared sensor utilizes a 17-bit analog-to-digital converter and a powerful digital signal processing unit
• With a resolution of 0.02 C, the Mantis sensor is a highly precise measuring instrument
• A proprietary lens serves to create a wide-angle field of view for the sensor to observe infrared radiation emitted from the tire s surface
• The lens protects the sensor from being damaged by road debris
• Encapsulating the sensor s electronic component assembly is a durable injection-molded polycarbonate housing
• The Mantis display unit houses a glare-free liquid crystal display and a processor capable of converting raw data from the thermal sensor into valuable human-readable information, in real time
• Programmable alerts can be easily set, and are useful in alerting the rider when his/her tire temperatures exceed the desired range

DRIVEN RACING Mirror Replacement Glass, made in the usa, Custom Replacement, Mirror Glass Kit

• Machined out of a solid block of 6061 T6 aluminum using 3D machining to create the best looking and working mirror to date
• Feature a stainless steel ball and cup system which allows the mirror to adjust infinitely to achieve the best viewing angle and to fit the bike style and the rider's ergonomics
• Flip-in function allows the mirror full flip-in adjustment during heavy traffic
• Fit most bikes with hollow bars; adapters are available and sold separately

DRIVEN RACING REPLACEMENT SCREW SET, made in the usa, Handlebar

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

EBC CX Extreme Vee Rotors, Front, specific application

• Heat-treated and tempered stainless steel construction
• New design rotor profile delivers improved brake performance and is self-cleaning
• Weigh less than the OE rotors and look great

EBC CX Extreme Vee Rotors, Rear, specific application

• Heat-treated and tempered stainless steel construction
• New design rotor profile delivers improved brake performance and is self-cleaning
• Weigh less than the OE rotors and look great

EMGO Chrome Lucas Replica Horn/Hi-Low Beam Switch, Mechanical, Natural, Each, Universal, Accessory Switch, wiring included

• Faithful reproduction of chrome Lucas style switch used for decades by OE British manufacturers
• Can be wired for many uses on customs
• Sold each

EMGO Muffler Adapters For Triumph Bonneville, 4-Stroke, Chrome, Steel, Pair, Round

• Adapters allow mounting of "classic" Triumph TR6/T120 63-70 mufflers on Hinkley Bonneville models for a classic look and exhaust note
• Constructed of 18 gauge chromed steel and slips on stock header pipes to allow mufflers with 11/2" to be easily mounted
• Sold in pairs

EMGO Rectifier, Each, specific application

• Direct plug-in OEM replacement
• Replaces Honda OEM# 31600-MV4-000 and 31600-MV4-010

EMGO Shock Bushing Adapter/Bushing, inside diameter 10mm, outside diameter 12mm, Pair, specific application

• Adapts 12mm shocks eyelets for use on 10mm applications
• 12mm o.d. x 10mm i.d.
• Sold as a pair

EMGO Universal Left-Side Handlebar Switch, Black, Plastic, Each, size 7/8", Toggle Switch, wiring included

• Includes headlight Hi-Lo, turn signal and horn button switches
• Pre-installed leads with bullet connectors for easy installation
• For 7/8" handlebars
• Sold each

EMGO Universal License Plate And Turn Signal Mounting Bracket, Black, Steel

• Perfect for use with undertail cowls when removing stock set-up
• Made from durable steel and coated with a black corrosion resistant finish
• Includes optional turn signal bracket that is width-adjustable; not needed to mount license plate bracket
• Turn signal bracket adjusts in width easily when mounting
• Works well when saddlebags are added and turn signals need to be relocated
• Includes mounting hardware

HINSON RACING Billet Clutch Pressure Plate, made in the usa, Aluminum, Each

• Complete the "billet-proof" clutch package
• CNC-machined from a solid piece of aircraft-quality T-6 billet aluminum and then Akadized for the highest level of reliability
• Provide a more rigid pressure plate to inhibit flexing with heat buildup
• Used by the world's most talented riders
• Made in the U.S.A.