All

16 products

16 products

Sold Out
External Retaining Ring Pliers BT 80/L* Spt 57/L* Use On All "C" Style Ret Rings Jims..2362
Mid-USA
$135.10
FEULING OIL PUMP CORP. 1" Dial Indicator
Feuling Oil Pump Corp.
$34.95
FEULING OIL PUMP CORP. Pressure Relief Spring/Valve Removal Tool, Remover/Installer, Red, Each, specific application, Harley 99-15 FX 99-15 FL
Feuling Oil Pump Corp.
$49.95
Hose Ferrule Installation Tool Use With -2 Goodridge Brk Hose Simplifies Assembly .Pgm102
Mid-USA
$55.42
Oxygen Sensor Socket Tool Dyna 06/L*,All BT & Spt 07/L* Rpls Hd #48262 Mfg.969
Mid-USA
$76.85
Sold Out
Oxygen Sensor Wrench Dyna 12/L*,Softail 12/L* Front Pipe Sensor Jims #755
Mid-USA
$92.55
Oxygen Sensor Wrench Softail 12/L* Rear Pipe Sensor Jims #756
Mid-USA
$86.30
Oxygen Sensor Wrench Touring Models 2010/Later* Jims #784
Mid-USA
$51.35
V-Twin Manufacturing Alternator Remover And Installer
V-Twin Manufacturing
$178.29
V-Twin Manufacturing Deutsch crimp tool
V-Twin Manufacturing
$337.74
V-Twin Manufacturing Ignition Switch Alignment Tool
V-Twin Manufacturing
$62.00
V-Twin Manufacturing James Exhaust Gasket Installation Tool
V-Twin Manufacturing
$81.50
V-Twin Manufacturing Motorcycle Alternator Rotor Puller Tool
V-Twin Manufacturing
$35.91
V-Twin Manufacturing Motorcycle Gas Tank Fuel Rod Alignment Tool
V-Twin Manufacturing
$59.98
V-Twin Manufacturing Oxygen Sensor Removal Tool, 3/8" Drive
V-Twin Manufacturing
$13.86
V-Twin Manufacturing Speedometer Sending Unit Wrench
V-Twin Manufacturing
$19.86
FEULING OIL PUMP CORP. 1" Dial Indicator Garage and Shop Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. 1" Dial Indicator

DS-38010281

$34.95

In Stock

Save $-34.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. 1" Dial Indicator
  • Makes for a great display to show and explain to customers the condition of their crankshaft
  • Simplifies and speeds up the process of checking pinion shaft run out
  • Quickly and accurately measures gear drive backlash on Twin Cam engines
  • Mounts to cam chest side of engine case using designated mounting holes of tool combined with cam-cover bolt holes
  • Includes tool plate, +/-0.001" dial indicator, thumb screws and hardware
  • Made in the U.S.A.
FEULING OIL PUMP CORP. Pressure Relief Spring/Valve Removal Tool, Remover/Installer, Red, Each, specific application, Harley 99-15 FX 99-15 FL Garage and Shop Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Pressure Relief Spring/Valve Removal Tool, Remover/Installer, Red, Each, specific application, Harley 99-15 FX 99-15 FL

DS-38010070

$49.95

In Stock

Save $-49.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Pressure Relief Spring/Valve Removal Tool, Remover/Installer, Red, made in the usa, Each, specific application, Harley 99-15 FX 99-15 FL
  • For easy removal and installation of pressure relief spring, by-pass valve and roll pin
  • Holds relief spring down and away from roll pin
  • Made in the U.S.A.
Hose Ferrule Installation Tool Use With -2 Goodridge Brk Hose Simplifies Assembly .Pgm102 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Hose Ferrule Installation Tool Use With -2 Goodridge Brk Hose Simplifies Assembly .Pgm102

MID-40202

$55.42

In Stock

Save $-55.42
/
Shipping calculated at checkout.
Hose Ferrule Installation Tool Use With -2 Goodridge Brk Hose Simplifies Assembly .Pgm102
  • Used to separate the braided stainless steel jacket away from the inner lining & open the bore for easy installation of the ferrule
Goodridge
or -2 (dash two) Hose
Oxygen Sensor Socket Tool Dyna 06/L*,All BT & Spt 07/L* Rpls Hd #48262 Mfg.969 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Oxygen Sensor Socket Tool Dyna 06/L*,All BT & Spt 07/L* Rpls Hd #48262 Mfg.969

MID-97501

$76.85

In Stock

Save $-76.85
/
Shipping calculated at checkout.
Oxygen Sensor Socket Tool Dyna 06/L*,All Bt & Spt 07/L* Rpls Hd #48262 Mfg.969
  • Designed to remove or install the 7/8 hex oxygen sensor on all closed loop fuel injected models
  • Socket has a 3/8 receiver or can be used with a 7/8 wrench
  • Will withstand up to 125 ft/lbs. of torque
Jims
Fits Dyna 2006/Later, Big Twin & Sportster 2007/Later
Replaces HD# 48262
Oxygen Sensor Wrench Softail 12/L* Rear Pipe Sensor Jims #756 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Oxygen Sensor Wrench Softail 12/L* Rear Pipe Sensor Jims #756

MID-97504

$86.30

In Stock

Save $-86.30
/
Shipping calculated at checkout.
Oxygen Sensor Wrench Softail 12/L* Rear Pipe Sensor Jims #756
  • These wrenches are a must for removing or installing oxygen sensors without exhaust pipe removal
  • Sold EachJims
    Oxygen Sensor Wrench
    Fits Softail 2012/Later rear exhaust pipe sensor
Oxygen Sensor Wrench Touring Models 2010/Later* Jims #784 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Oxygen Sensor Wrench Touring Models 2010/Later* Jims #784

MID-97502

$51.35

In Stock

Save $-51.35
/
Shipping calculated at checkout.
Oxygen Sensor Wrench Touring Models 2010/Later* Jims #784
  • These wrenches are a must for removing or installing oxygen sensors without exhaust pipe removal
  • Sold EachJims
    Oxygen Sensor Wrench
    Fits Touring Models 2010/Later
V-Twin Manufacturing Alternator Remover And Installer Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Alternator Remover And Installer

VT-16-1054

$178.29

In Stock

Save $-178.29
/
Shipping calculated at checkout.
V-Twin Manufacturing Alternator Remover And Installer - Sold Each
Big Twin Alternator Rotor Puller uses the Sprocket shaft end to center and the two threaded holes in Rotor to allow removal of Rotor.
V-Twin Manufacturing Deutsch crimp tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Deutsch crimp tool

VT-16-0475

$337.74

In Stock

Save $-337.74
/
Shipping calculated at checkout.
V-Twin Manufacturing Deutsch crimp tool - Sold Each
Crimp Tool Deutsch crimp tool for use with all solid type Deutsch terminals. Fits: All models UOM: 1 - EA Country of Origin: USA
V-Twin Manufacturing Ignition Switch Alignment Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Ignition Switch Alignment Tool

VT-16-0017

$62.00

In Stock

Save $-62.00
/
Shipping calculated at checkout.
V-Twin Manufacturing V-Twin Manufacturing Ignition Switch Alignment Tool - Sold Each
Ignition Switch Alignment Tool Ignition switch tool will align the switch housing as the retaining screws are being torqued. Features a blue anodized finish. Fits Harley-Davidson models: FLT 2003-2013 VRSC 2002-UP
V-Twin Manufacturing James Exhaust Gasket Installation Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing James Exhaust Gasket Installation Tool

VT-16-2112

$81.50

In Stock

Save $-81.50
/
Shipping calculated at checkout.
V-Twin Manufacturing James Exhaust Gasket Installation Tool - Sold Each
Exhaust gasket installation tool will help install that fragile exhaust seal. Tool will correctly install exhaust port gaskets into cylinder heads and minimizes gasket distortion. Helps heads flow better. Fits: FXST 1984-UP FLT 1
V-Twin Manufacturing Motorcycle Alternator Rotor Puller Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Motorcycle Alternator Rotor Puller Tool

VT-16-0693

$35.91

In Stock

Save $-35.91
/
Shipping calculated at checkout.
V-Twin Manufacturing Motorcycle Alternator Rotor Puller Tool - Sold Each
Motorcycle Alternator Rotor Puller Tool Alternator rotor puller tool Fits: All models UOM: 1 - EA Country of Origin: Imported
V-Twin Manufacturing Motorcycle Gas Tank Fuel Rod Alignment Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Motorcycle Gas Tank Fuel Rod Alignment Tool

VT-16-0182

$59.98

In Stock

Save $-59.98
/
Shipping calculated at checkout.
V-Twin Manufacturing V-Twin Manufacturing Motorcycle Gas Tank Fuel Rod Alignment Tool - Sold Each
Motorcycle Gas Tank Fuel Rod Alignment Tool Fits Harley-Davidson models: FL 1941-1965 W 1936-1952 G 1936-1956 EL 1936-1952 UOM: 1 - EA Country of Origin: Imported You Tube Video on this product : https:
V-Twin Manufacturing Oxygen Sensor Removal Tool, 3/8" Drive Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Oxygen Sensor Removal Tool, 3/8" Drive

VT-16-1132

$13.86

In Stock

Save $-13.86
/
Shipping calculated at checkout.
V-Twin Manufacturing Oxygen Sensor Removal Tool, 3/8" Drive - Sold Each
The oxygen sensor tool easily removes or installs sensors on fuel injected models. Use with a 3/8" drive for 12mm sensors. Fits: FXST 2006-UP FLST 2006-UP FXD 2006-UP FLT 2006-UP XL 2006-UP UOM: 1 - EA C
V-Twin Manufacturing Speedometer Sending Unit Wrench Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Speedometer Sending Unit Wrench

VT-16-6738

$19.86

In Stock

Save $-19.86
/
Shipping calculated at checkout.
V-Twin Manufacturing Speedometer Sending Unit Wrench - Sold Each
Speedometer Sending Unit Wrench features a shortened 3/16 ball end hex bit for removal or installation of hex screw used on all Big Twin models. Equipped with electronic sending units.