All

COMETIC Extreme Sealing Technology (EST) S&S Top End Gasket Set With S&S Rocker Boxes, For 92-99 S&S Super Stock., With S&S Rocker Boxes., bore size 4", Each, specific application

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

Est Top End Gaskets & Seals Bt Evo 92/L 3-1/2"Stock Bore Hi Performance Cometic C9635
Designed for 3 1/2 (standard bore) cylinders, this set features head, base and lower rocker cover gaskets that are made from stainless spring steel with a coating of nitrile bunadien rubber (NBR) on each side. The head gaskets measure .040 thick with a unique three piece design that can easily withstand 15:1 plus compression ratio. Due to the embossed design and NBR coating of these head gaskets, oil drain back O rings are not necessary. The base gaskets and lower rocker cover gaskets measure .020 thick and will not extrude out when torqued like the OE style paper gaskets. The tappet block gaskets, gear cover and ignition cover gasket are made from a Kevlar based fiber material. Also included are rubber rocker cover gaskets and a dual lip cam seal. Fits Big Twin Evolution 1992/Later.3 1/2 (OE Cylinders) Bore, .040 Thick 3 Piece Stainless Head Gasket
Single Layer Steel Base Gasket
One Piece Single Layer Steel Rocker Cover Gasket
Aluminum oam Material Gear Cover Gasket
Big Twin Evolution 1992/1999

Est Top End Gaskets & Seals Bt Evo 92/L 3-5/8" Big Bore Hi Performance Cometic C9766
Extreme Sealing Technology (EST) Gasket Sets by Cometic are by far the most advanced collection of gaskets and seals available. The base gaskets and lower rocker cover gaskets feature a nitrile bunadine rubber (NBR) coating on both sides of a stainless spring steel gasket. This type of NBR coated steel gasket will hold Fits shape and won't extrude out and fail like the paper type gaskets are known to do under normal cold to hot start ups with rapid expansion. The three piece head gasket design features an aluminized stainless steel center sandwiched between two NBR coated stainless spring steel outer layers. To ensure the utmost sealing power, the outer layers are embossed at the cylinder bore and the oil drain backs providing a seal so good that cylinder dowel O rings are not required. The upper rocker cover gaskets are made from a very pliable rubber that will not harden like OE gaskets do. All other gaskets are made from a Kevlar based fiber material.3 5/8 (Big Bore), .040 Thick 3 Piece Stainless Head Gasket
Single Layer Steel Base Gasket
One Piece Single Layer Steel Rocker Cover Gasket
Gear Cover Gasket not included
Fits Big Twin Evolution 1992/1999

Gaskets/Seals Engine,Top End Big Twin Evo 1984/1991 Rpls 17033-83A Cometic C9074
Includes necessary gaskets and seals needed when performing a top end overhaul. Available with cork rocker gaskets as listed. Fits Big Twin Evolution 1984/Later as shown.3 1/2 (OE Cylinders) Bore, .059 Thick 1 Piece CM-20 Head Gasket
Aramid iber Base Gasket
Two Piece Aramid iber Rocker Cover Gasket
Gear Cover Gasket not included
Fits Big Twin Evolution 1984/1991

Gaskets/Seals Engine,Top End Bt Evo 84/91 Complete Top End Rebuild 3-5/8"
POWER HOUSE
Bore Size: 3 5/8
Head Gasket Thickness: Std.
Fits Big Twin Evolution 1984/1991

Gaskets/Seals Engine,Top End Panhead 61/74Ci All Years Oem Style Std Bore Est .C9968

• eatures AM^® (aluminum foam material) rocker cover gaskets
• AM gasket material is a chemically blown foam type compound of nitrile synthetic rubber bonded on both sides of an aluminum base sheet
• Set includes necessary gaskets and seals as shown when performing a top end overhaul

Cometic Gasket
Fits Panhead 1948/1965
Replaces HD# 17034-48B

Gaskets/Seals Engine,Top End Shovelhead All Years Rpls 17034-66 Cometic C9118
eatures

• Early and Late intake manifold gaskets
• Pushrod cover seals include early cork style, late O ring style and late style quad lower seals
• Early and late valve guide seals
• Exhaust gaskets manufactured from fiber core, armor clad on both sides with a copper fire ring
• iber cylinder base gaskets
• Stock style Shovelhead set includes fiber style head gaskets with fire ring

Cometic
Top End Gasket & Seal Set
Fits Shovelhead, all years, with stock style cylinders
Replaces HD# 17034-66

Gaskets/Seals,Engine,Top End Bt Evo 92/Later .030 Head, Rpls 17040-92A
POWER HOUSE
Bore Size: 3 1/2
Head Gasket Thickness: .030
Fits Big Twin Evolution 1992/1999
Replaces HD# 17040-92A

Gaskets/Seals,Engine,Top End Bt Evo 92/Later,.030" Head Gskt Rpls 17040-92A Mfg#C9850

• Cometic
• Includes the necessary Gaskets, O rings and Seals needed when performing a top end overhaul
• Head Gaskets are available in your choice of 3 piece stainless steel with a nitrile bunadine rubber coating that does not require drain-back O rings or available in a 1 piece CM-20 type that has a stainless steel fire ring as listed
• Base Gaskets are available in .020 thick single layer stainless steel with a nitrile bunadine rubber coating or available in a .020 thick aramid fiber compound as listed
• Lower Rocker Gaskets are available in your choice of 1 piece single layer stainless steel with a nitrile bunadine rubber coating or your choice of 2 piece aramid fiber compound as listed
• Upper and Middle Rocker Cover Gaskets are made from rubber
• Sets as listed include a Gear Cover Gasket that is made from an aluminum base sheet covered with a chemically blown compound of foam-like synthetic rubber on both sides

3 1/2 (OE Cylinders) Bore, .030 Thick 3 Piece Stainless Head Gasket
Single Layer Steel Base Gasket
One Piece Single Layer Steel Rocker Cover Gasket
Aluminum oam Material Gear Cover Gasket
Fits Big Twin Evolution 1992/1999

S&S CYCLE Top End Gasket Kit For 84-06 S&S Super Stock Evolution And Twin Cam

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

S&S CYCLE Top End Gasket Kit For 84-99 S&S Super Stock Evolution, bore size 3.625"

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

S&S CYCLE Top End Gasket Kit For 99-06 S&S Super Stock Twin Cam

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

S&S CYCLE Top End Gasket Kit For S&S Motor, bore size 4 1/8"

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

TP ENGINEERING Pro-Series Top End Gasket Kit For TP Engineering Motor, bore size 4 1/8"

• Gasket sets unique to TP motors; no other gasket set has all the gaskets to rebuild a TP motor
• Lower end gasket sets include gaskets and seals for the crankcase and oil pump
• Top end gasket sets include gaskets and seals for cylinder, cylinder heads and pushrod tubes
• Does not include rocker box gaskets
• TP Rocker Box Gasket kits are for TP Rocker boxes only
• Made in the U.S.A.

TP ENGINEERING Pro-Series Top End Gasket Kit For TP Engineering Motor, bore size 4"

• Gasket sets unique to TP motors; no other gasket set has all the gaskets to rebuild a TP motor
• Lower end gasket sets include gaskets and seals for the crankcase and oil pump
• Top end gasket sets include gaskets and seals for cylinder, cylinder heads and pushrod tubes
• Does not include rocker box gaskets
• TP Rocker Box Gasket kits are for TP Rocker boxes only
• Made in the U.S.A.

V-Twin Manufacturing Gary Bang Complete Engine Gasket Kit, 1984-88 5-Speed FXR-FLT - Kit

Complete gasket kit, 5-speed

OEM: 17035-84

FXST 1984-1988
FLST 1998-1988

V-Twin Manufacturing Gary Bang Top End Gasket Kit 1984-91 V2 Evo - Kit

Top end gasket kit

OEM: 17033-83

FXST 1984-1991
FLT 1984-1991
FXR 1984-1991
FLST 1986-1991
FXD 1991

V-Twin Manufacturing Gary Bang Top End Gasket Kit 1992-99 V2 Evo - Kit

Top end gasket set

OEM: 17040-92A

FXST 1992-1998
FLST 1992-1998
FLT 1992-1998
FXD 1992-1998
FXR 1992-1994

V-Twin Manufacturing James Top End Set w .045" Head Gaskets-Steel Base-Rubber Rocker Gaskets, - Kit
James Top End Sets years: 1984-1999, Models Evo 3 5/8" Big Bore, (.045" Head Gaskets /Steel Base/Rubber Rocker Gaskets).

V-Twin Manufacturing James Top End Set w .045'' Head Gasket-Steel Base-Rubber Rocker Gaskets, - Kit
James Top End Sets, years 1992-1999, Models Evo, (.045" Head Gaskets/Rubber Rocker Gaskets).

V-Twin Manufacturing James Top End Set w .045'' Teflon Head Gaskets-Rubber Rocket Gaskets, - Kit
James Top End Sets for years: 1984-1991, Models Evo, (.045 Teflon Head Gaskets/Rubber Rocker Gaskets).

V-Twin Manufacturing James Top End Set w .45'' Head Gaskets Rubber Rocker Gaskets, 1992-99 Evo - Kit
James Top End Sets, years 1992-1999, Models Evo 3 5/8" Big Bore, (.045" Head Gaskets/Rubber Rocker Gaskets).

V-Twin Manufacturing James Top End Set w-Teflon Head Gaskets-Cork Rocker Gaskets, 1984-91 Evo - Kit
James top end gasket set with teflon head, cork rocker gaskets, viton valve stem seals and Exhaust gaskets. OEM No: 17033-83 Fits: FXST 1984-1991 FLT 1984-1991 FXR 1984-1991 FLST 1986-1991 FXD 1991