All

BARNETT Black Universal Throttle Cable, length 53", made in the usa, Vinyl

• 15, 30, 40 or 50A versions available
• Sold each

MOTION PRO Black Throttle Cable, Push-in, length 29.75", Vinyl, Buell 99-06

• 15, 30, 40 or 50A versions available
• Sold each

Univ Throttle Cable,Braided 30" Housing,8"Free Length

• Cables have black vinyl or Argent braided with clear coat housing
• Manufactured under our close supervision by one of the top foreign cable manufacturers
• Traditional chopper throttle cable used on many types of carburetors and throttle assemblies
• Old school styling!V-FACTOR
  Clear Coated Argent braided 30 cable
  (Imported)

Univ Throttle Cable,Braided 34" Housing,8"Free Length

• Cables have black vinyl or Argent braided with clear coat housing
• Manufactured under our close supervision by one of the top foreign cable manufacturers
• Traditional chopper throttle cable used on many types of carburetors and throttle assemblies
• Old school styling!V-FACTOR
  Clear Coated Argent braided 34 cable
  (Imported)

Univ Throttle Cable,Braided 36"Housing,8"Free Length

• Cables have black vinyl or Argent braided with clear coat housing
• Manufactured under our close supervision by one of the top foreign cable manufacturers
• Traditional chopper throttle cable used on many types of carburetors and throttle assemblies
• Old school styling!V-FACTOR
  Clear Coated Argent braided 36 cable
  (Imported)

Univ Throttle Cable,Braided 40"Housing,8"Free Length

• Cables have black vinyl or Argent braided with clear coat housing
• Manufactured under our close supervision by one of the top foreign cable manufacturers
• Traditional chopper throttle cable used on many types of carburetors and throttle assemblies
• Old school styling!V-FACTOR
  Clear Coated Argent braided 40 cable
  (Imported)

Univ Throttle Cable,Braided 44"Housing,8"Free Length

• Cables have black vinyl or Argent braided with clear coat housing
• Manufactured under our close supervision by one of the top foreign cable manufacturers
• Traditional chopper throttle cable used on many types of carburetors and throttle assemblies
• Old school styling!V-FACTOR
  Clear Coated Argent braided 44 cable
  (Imported)

Univ Throttle Cable,Braided 60"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

FXST 1991-1992
FLST 1991-1992
FLT 1991-1992
FXD 1991-1992
FXR 1991-1992

Univ Throttle Cable,Braided 64"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

FXST 1993-1993
FLST 1993-1993
FLT 1993-1993
FXD 1993-1993
FXR 1993-1993

Univ Throttle Cable,Braided 66"Housing,8"Free Length

Kit includes clutch drive, o-ring, lock tab, seals, springs, and cable boot.

XL 1991-UP

Univ Throttle Cable,Braided 72"Housing,8"Free Length

Volt Tech Alternator Stator 22 amp, unmolded type. Features heavy duty copper windings with plug.

OEM: 29967-89B

XL 1990-2006

V-Twin Manufacturing 38" S&S Stainless Steel Braided Cable Set, 1996-up - Set

Point cover seal

OEM: 11124

XL 1957-UP

V-Twin Manufacturing 46" Stainless Steel Throttle and Idle Cable Set - Set

Electric starter spring pinion gear

OEM: 33449-90

FXST 1990-UP
FLST 1990-UP
FLT 1990-UP
FXD 1990-UP

Tech Note:

Suggested to use with #14-0569 disc coupler o-ring

V-Twin Manufacturing Barnett black vinyl throttle cable has a 43.625" casing length and a 47.375" overall length - Sold Each
OEM No: 70058-50 Directional switch is a three position type with three cloth covered wires. Includes one each of green, red, and black wires and chrome plated housing. Switch features bottom exit wires, and stainless screws. Fits:

V-Twin Manufacturing Barnett Carb Conversion Throttle-Idle Cable, Dell'Orto Pumper, Stainless, - Sold Each

Housing kit includes left and right upper and lower housing. Housings are smooth style, stock chrome type.
Order switch and wiring separately.

FLTCU 2008-UP with cruise control
FLHTCUTG 2008-UP with cruise control
FLHTK 2008-UP
FLTR

V-Twin Manufacturing Barnett Carb Conversion Throttle-Idle Cable, S&S Super B or Bendix, - Sold Each

Kit includes press on chrome switch caps for easy installation.

FXST 1996-UP
FLST 1996-UP
FXD 1996-UP
FLHR 1996-UP
XL 1996-UP

V-Twin Manufacturing Barnett Clear Coat Braided Stainless Throttle Cable Sets, +8 , 1990-95 - Kit

Accel performance tune up kit includes matched crown contact points, condenser, gap settings and point cam lube.
Replacement spark plugs are not included.

FL 1948-1969 with magneto installed
XL 1957-1970 with magneto installed

V-Twin Manufacturing Barnett Clear Coat Braided Stainless Throttle Cable Sets, 38 , 1981-95 S&S - Kit

Stud type neutral swtch is manufactured to ensure proper function and long life.
Features high carbon steel stems hardended to 48 Rockwell C for maximum r sistance and durability.
OEM: 33902-98

FXST 1998-2000
FLSTD 1998-2000
FXD 1998

V-Twin Manufacturing Barnett Clear Coat Braided Stainless Throttle Cable Sets, 38 , 1996-up S&S - Kit

Ignition module adapter allows use of 7-pin module (1991- 1993) going to 8-pin Deutsch (1994-1999) wiring harness.
For special application on 1993-1993 FLT, FXD, FXST, FLST models. Adapter cannot be used on EFI models.

Special application

V-Twin Manufacturing Barnett Keihin, Black, 38 Throttle Unv., Single - Sold Each

Spark plug wire set is 8mm type.
Sold in a quantity of 2.

XL 1971-1983
XLCH 1971-1983

V-Twin Manufacturing Barnett Mikuni Carb, 38 and 40mm, Black, 38 Throttle Unv., Single - Sold Each

Main wiring harness features plastic covered wires and includes high tension wires.
Order tail lamp, handlebar and turn signal wires separately.
OEM: 70135-86

XL 1986-1990
XLS 1986-1990

Tech Note:

Suggested to use with #48-

V-Twin Manufacturing Barnett Mikuni Carb, 38 and 40mm, Black, 46 Throttle Unv., Single - Sold Each

Main wiring harness kit features plastic wire in original factory color codes, with all terminals applied in vinyl loom.
Handlebar and tail lamp wiring must be purchased separately. Main wiring harness includes the main turn signal wires.
OEM: 69

V-Twin Manufacturing Barnett Mikuni Carb, 38 and 40mm, Stainless Clear Coat, 38 Throttle Unv., - Sold Each

Oil pressure switch is precision calibrated and provide a warning when the oil pressure drops below the desired running pressure.
Features heavy duty contacts and mica filled thermoplastic insluators to withstand extreme temperatures and are designe

V-Twin Manufacturing Barnett Mikuni HS 42-45, Black, 36 Throttle 1981-95 - Sold Each

3-phase kit includes stator, regulator, rotor, and hardware.
Kit offers an increase in charging power when upgrading from a 32 or 38 amp system. This 80 series kit produce 32 amps at 1000 RPMs and 50 amps at 2500 RPMs. For stock replacement.
OEM

V-Twin Manufacturing Barnett Mikuni HS40 degree Black, 41 Throttle 1981-95 - Sold Each

Features solid state components in generator end cover. Black end cover has needle bearing installed for 12 volt generators.

FL 1965-1969
XL 1965-1981

V-Twin Manufacturing Barnett Mikuni HS40 degree Stainless Clear Coat, 41 Throttle 1981-95 - Sold Each

15 amp circuit breaker is self resetting.

OEM: 74587-94

XL 1994-1997
FLT 1994-1996
FXST 1996-1999
FLST 1996-1999
FXD 1996-1999

V-Twin Manufacturing Barnett Mikuni HS40 Throttle Cable, Black, 41 1996-up - Sold Each

Rubber rear battery strap.

OEM: 66111-93

FXST 1993-1999
FLST 1993-1999

Measurements:

Length: 6"
Width: 1"

V-Twin Manufacturing Barnett Qwiksilver, Black, 39 Throttle 1996-up - Sold Each
Exhaust Oxygen Sensors Front or Rear OEM No: 27719-07 Exhaust oxygen sensor has 18mm X 1.5mm threads. Sensor is for the front or rear cylinder. Sold each. Fits: XL 2007-UP Front or Rear Fitment FLT 2007-2009 Front

V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Black, 41 - Sold Each

Volt Tech regulator features rugged aluminum alloy construction and provides more accurately regulated voltage under all electrical loads. Volt Tech regulator has chrome finish.

OEM: 74523-04

XL 2004-2006

V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Black, 41.5 - Sold Each

Battery tray insert is stock OE replacement type.

OEM: 66210-85B

FLST 1986-1997
FXST 1984-1997

Measurements:

Length: 8"
Width: 4"

V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Stainless Clear - Sold Each

Alternator charging system kit includes rotor, stator, regulator and all hardware necessary for installation. Charging kit includes 35 tooth sprocket.

XL 1991-1993

V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Stainless Clear - Sold Each
Alternator 17 Amp Charging System Kit Alternator charging system kit includes alternator rotor clutch shell assembly with bearing and ring gear installed. Alternator rotor clutch shell assembly features vibration proof magnet construction,

V-Twin Manufacturing Barnett Throttle Cable, Black, 42.375"Casing, + 8 length, Stock 1996-up - Sold Each

Kit includes left and right upper and lower housings and accept stock switches for easy assembly.

OEM: 70222-96B

VRSC 1996-2006
XL 1996-2006
XR 1996-2006
FXD 1996-2006
FLHR 1996-2006
FXST 1996-2006
FLST 1996-2006

T