All

Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL Belt Drives

ECRS-100

Belt Drives Ltd.
Clutch Steel Plate Kit
Includes: 7 Splined Steel Plates (.060" thick)
By: BELT DRIVES LTD

Belt Drive Belt Guide Plate Front Inside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel
Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits inside of pulley.

Belt Drive Belt Guide Plate Front Outside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel
Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits outside of pulley. This guide is standard with all our kits. Guide assures 100% belt to pulley contact.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1"Offset & Mtg Hrdw In-1000
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1 offset insert and mounting hardware. Steel.

Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1-1/2"Offset,Mtg Hrdw In-1500
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Steel Replacement 1 1/2 offset insert and mounting hardware.

Replacement Rear Clutch Basket TFRP-46

Belt Drives Ltd.
Replacement Rear Clutch Basket

Belt Drive Part,Cl Drive Plate Fit #77012/77024 Belt Drives Use 4 ... Bdl Ecp-200

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

M) ull iber riction Clutch Plate. Use 4.

Belt Drive Part,Cl Half Plate Fit #77012/77024 Belt Drives Use 2 ... Bdl Ecp-100

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

K) Half iber riction Clutch Plate. (Use 2)

Belt Drive Part,Cl Hub Bearing Fits All Bdl Belt Drives That Include Clutch....Bdl Ehb-100

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

D) Belt Drives Ltd.
Rear Pulley Bearing, (Imported)

Belt Drive Part,Cl Steel Plate Fits Bdl Cl Baskets W/Round Dog Drive Use 5 Bdl Erds-100

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

L) Steel Clutch Plate. Fits Clutch Baskets with Round Dog Drive. Use 5.

Belt Drive Part,Cl Steel Plate Fits Bdl Cl Baskets W/Square Dog Drive Use 5 Bdl Edp-100

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

L) Steel Clutch Plate. Fits Clutch Baskets with Square Dog Drive. Use 5.

Belt Drive Part,Clutch Bolts Fit #77012/77024 Belt Drives Bdl Esb-100

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

O) Clutch Bolt Kit for Clutch Springs. Includes 6 bolts.

Belt Drive Part,Fr Pulley 8Mm 3"Wide Bt W/Tapered Eng Shaft Open Primary Belt Drive..47T-3

• These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
• All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
• Each pulley includes a mounting nut and washer

Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd.
3 Wide 8mm Pulley
Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1954 with tapered sprocket engine shaft fits kit 77010

Belt Drive Part,Front Pulley St L85/06,1-5/8"Wide 8Mm 45T Use W/Offset Insert&Nut 45-Ofp
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1 5/8 wide 45 tooth front pulley only.

Belt Drive Part,Inner Cl Hub Bt Evo 1984/89 Bdl Systems W/Tapered Hub 8Mm Bdl Ev-170

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

G) Inner Clutch Hub. Fits 77017 and 77005.

Belt Drive Part,Inner Cl Hub Bt Evo 1990/L* Bdl Systems W/Splined Hub 8Mm Bdl Ev-180

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

G) Belt Drives Ltd.
Inner Clutch Hub w/Retaining Ring, Fits 77031, 77023, 77025 & 77034

Belt Drive Part,Pulley Covers Fits Bdl 3" Open Drives Ex Sh Pol Alum W/Hardware Md-100

• Baby moon style.
• Polished aluminum.
• Offers better protection and reducees clutch noise.
• Includes special tape for permanent installation and button head bolts if you choose to drill and tap hub for easy on and off access.

Polished aluminum pulley covers, includes double stick tape and screws for mounting. Fits 5 speed 3 open drives (Softail 1986/Later, FLT 1990/Later and FXR 1990/1994).

Belt Drive Part,Rr Pulley 8Mm 3" W/Brg,Str Gear & Round Cl Dogs See Catalog For Fit 72-3E

• Clutch Pulleys and Steel Clutch Plates have Round Dog or Square Dog drives, please verify before ordering
• See drive train section for replacement starter ring gears

E) Round Dog Drive Rear Pulley with Bearing and Starter Gear, 3 wide. 72 teeth fits 77025, 77026, 77201 & 77034.

V-Twin Manufacturing 36-54 BT Sprocket Acorn Nut - Sold Each

Acorn nut for sprocket shaft.

Custom application for sprocket shaft

V-Twin Manufacturing 55-Up BT Acorn Sprocket Nut - Sold Each

Acorn engine sprocket nut

Custom application for splined sprocket shaft

V-Twin Manufacturing 55-Up BT-Pike Motor Nut - Sold Each

Pike engine sprocket nut.

Custom application for sprocket shaft

V-Twin Manufacturing Bearing For 20-0227 Support, 65-84 BT - Sold Each

Bearing for belt drive support is a high quality hardened steel for improved reliability.

Custom application for belt drive bearing support

Tech Note:

Suggested to use with #20-0227 belt drive support

V-Twin Manufacturing Belt Drive Bearing Support, 1965-84 BT - Sold Each
Bearing Support when cast aluminum Inner Primary Cover is removed for installation of open belt drive on 1965-1984 model Big Twin 4 speed, the main shaft requires additional support.Item: Chain type fits with belt front & rear chain drive

1965-1984 model Big Twin 4 speed

V-Twin Manufacturing Belt Drive Clutch Hub Nut w-Seal, 1990-up, Splined - Kit

Use this splined type clutch hub nut with seal to eliminate leakage of transmission oil thru the mainshaft when running open belt drives.
Kit includes nut, adjuster screw and locknut.

Order o-ring separately.

Fits:
FXST 1991-UP
FLST 1991-UP
FLT 1991-UP
FXD 1991-2017
FXR 1991-1994
UOM: 1 - KIT

Country of Origin: USA

V-Twin Manufacturing Front Belt Lock Plate And Nut Kit 93-06 XL - Kit
Front Belt Lock Plate and Nut Kit includes 2 allen screws, Sprocket lock nut and lock plate. Fits 1993-up Big Twin and 1991-up XL models.

V-Twin Manufacturing Out Board Support Kit Chrome 3 BDL and York - Kit
Out Board Support Kit fits 3 BDL and York Unit Chrome Finish

V-Twin Manufacturing Outer Pulley Cover, Chrome, 70 Tooth, Torx Bolt Kit w-socket - Set

Pulley bolt set includes button with washers and wrench

OEM: 3771

FXR 1985-1996
FXST 1985-1996
FLST 1985-1996

V-Twin Manufacturing Rear Axle Spacer Set 1" inner diameter bearings,fits 3/4" axle - PR
Rear Axle Spacer Set 1" Inner Diameter Rear axle long style spacer allows wheels with 1" inner diameter bearings to fit 3/4" axle. Spacer is 1-1/8" long with exposed shoulder area 1". Fits: Custom application Finish:

V-Twin Manufacturing Rear Pulley Bolt and Washer Kit Allen Style - Kit
Rear Pulley Bolt and Washer Kit Allen Style Polished rear pulley bolt and washer kit is allen type with a 7/16-14 x 1-3/4" thread size. Fits Harley-Davidson models: FXST 1993-1996 cast wheel FXD 1997-1998 cast wheel FL

V-Twin Manufacturing Sealed Clutch Drum Bearing, 1991-up Big Twin - Sold Each

Sealed clutch drum bearing is a high quality hardened steel for improved reliability.

FXST 1991-UP
FLST 1991-UP
FLT 1991-UP
FXD 1991-UP

V-Twin Manufacturing Sealed Inner Primary Bearing, York and BDL - Sold Each

Sealed inner primary cover bearing with honed ID for York and BDL models.

Replacement for York and BDL belt drives