All

Cable Clamp W/Rubber Sleeves Fits 1"/1-1/8" Od Frame Or Hb Holds Two Cables Mfg#11-0044

Features rugged aluminum alloy construction and provides more accurately regulated voltage under all electrical loads . Volt Tech regulator has chrome finish.

OEM: 74546-07A

XL 2007-UP

Cable Clamp W/Rubber Sleeves Fits 1.25"/1.5"Od Frame Or Hb Holds 2 Cables, Black 11-0091

Features rugged aluminum alloy construction and provides more accurately regulated voltage under all electrical loads . Volt Tech regulator has chrome finish.

OEM: 74711-08

XL 2009-UP

Clutch Cable Mount Eo Style Cp Fl 65/Early 79,Fx 71/Early 79 Replaces Hd 62576-65A

Volt Tech regulator features rugged aluminum alloy construction and provides more accurately regulated voltage under all electrical loads. Volt Tech regulator has chrome finish.
Unit fits 3-phase 45/60 amp FLT models.
OEM: 74505-06

FLT 200

Clutch Or Brake Cable Clamp 1" Inside Diameter Ball Milled Style,Chrome Plate

Alternator stator kit, 45 amp charging system includes rotor , stator and hardware.

FLT 1991-1996

Clutch Or Brake Cable Clamp 1" Inside Diameter Smooth Style,Chrome Plated

Accel starter solenoid has a zinc finish.
Use 4-Speed style solenoid on 1984-1988 FXST 5-Speed models.
OEM: 31489-79

FLT 1979-1988
FXR 1982-1988

Clutch Or Brake Cable Clamp 1-1/4" Inside Diameter Ball Milled Style,Chrome Plate
OEM No: 31621-06A Volt Tech starter motor is 1.4kW field wound permanent magnet type. Chrome units have all aluminum parts polished and all steel parts are chrome plated. Stock motor is 1.2kw field wound type. Starter is supplied with jack shaft

Clutch Or Brake Cable Clamp 1-1/4" Inside Diameter Smooth Style,Chrome Plated

Hitatchi type starter housing is a quality casting with all the machining done to specifications. Starter housing only
Starter housing to primary holes are unthreaded. Use with 10-24 Thread Per Inch bolts. Order hardware and related parts separately

Clutch Or Brake Cable Clamp 1-1/8" Inside Diameter Ball Milled Style,Chrome Plate
OEM No: 31649-06 Volt Tech starter motor is 1.4kW field wound permanent magnent type and is black powder coated. Stock motor is 1.2kw field wound type. Starter is supplied with jack shaft bolt. Fits: FXD 2006-UP FXST 2007-UP

Clutch Or Brake Cable Clamp 1-1/8" Inside Diameter Smooth Style,Chrome Plated

Prestolite type starter housing is a quality casting with all the machining done to specifications.
Order housing bearing separately.
OEM: 31465-65

FLH 1965-1978

Tech Note:

Order starter housing bearing #12-0317

DRAG SPECIALTIES Chrome Cable Clamp, Brake, Idle, Throttle, Natural, 41mm

Automatic advance vertical magneto features H-4 automatic advance for easier starting and hotter spark, polished aluminum cam cover, and rare earth magnets that never need to be recharged.
No frame, pipe or brake pedal modifications are required.

DRAG SPECIALTIES Chrome Cable Clamp, Brake, Idle, Throttle, Natural, size 1 1/8"
Handlebar switch kit has chrome switches, terminals, and a 24 wire harness. Wires are 50" long, and are for models with radio and cruise control. \ Fits: FLT 2007-UP UOM: 1 - KIT Country of Origin: Imported

DRAG SPECIALTIES Chrome Cable Clamp, Brake, Idle, Throttle, Natural, size 1"
Cast aluminum magneto housing is die cast as original with a natural finish, and has rare earth magnets cast in. Bare housing without key lock hole provision. Name plate pins are on the outside (facing you), when the shaft is on the left. Name plate

DRAG SPECIALTIES Chrome Cable Clamp, Clutch, Natural, size 1 1/2"
Chrome Switch Cover Set Switch cover set is easily installed and does not require any rewiring. Features a chrome finish. Fits Harley-Davidson models: FLT 2014-UP UOM: 1 - SET Country of Origin: Imported

DRAG SPECIALTIES Chrome Cable Clamp, Clutch, Natural, size 1 1/4"

Automatic advance vertical magneto features H-4 automatic advance for easier starting and hotter spark, natural aluminum cam cover, and rare earth magnets that never need to be recharged.
No frame, pipe or brake pedal modifications are required.

DRAG SPECIALTIES Chrome Cable Clamp, Clutch, Natural, size 1 1/8"
Black 12 Volt Alternator Generator Conversion Kit Black alternator bolts on in place of original 12 volt generator. Black solid state finned regulator, gear, oil deflector kit, gasket and mount screw set are included. *NOTE: On 1941-57 mod

DRAG SPECIALTIES Chrome Cable Clamp, Clutch, Natural, size 1"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire set is designed for electronic ignitions but work great on point type ignitions. Wire kit is black 8mm type.

FXST 2000-UP
F

DRAG SPECIALTIES Chrome Cable Clamp, Idle, Single Cable, Throttle, Natural, size 1 1/4"
This magneto is prepared and set up to increase performance and reliability. Direct drop in. Magneto is a direct bolt in for Big Twins and 45 Flatheads. Order related mount plates separately. Fits: U 1936-1948 W 1936-1952 G

DRAG SPECIALTIES Chrome Cable Clamp, Idle, Single Cable, Throttle, Natural, size 1 1/8"
OEM No: 31544-90 Includes clutch drive, shaft, o-ring, lock tab, seals, spring, and cable boot. Fits: FXST 1989-1990 FLST 1989-1990 FLT 1989-1990 FXR 1989-1990 UOM: 1 - KIT Country of Origin: Imported

DRAG SPECIALTIES Chrome Cable Clamp, Idle, Single Cable, Throttle, Natural, size 1"
OEM No: 74523-94 Chrome Accel voltage regulator is 22 amp. Fits: XL 1994-2003 UOM: 1 - EA Country of Origin: USA

DRAG SPECIALTIES Chrome Cable Clamp, Idle, Throttle, Natural, size 1 1/4"

3-phase kit includes stator, regulator, rotor, and hardware.
Kit offers an increase in charging power when upgrading from a 32 or 38 amp system. This 80 series kit produce 32 amps at 1000 RPMs and 50 amps at 2500 RPMs. For stock replacement.
OEM:

DRAG SPECIALTIES Chrome Cable Clamp, Idle, Throttle, Natural, size 1 1/8"

15 amp circuit breaker

OEM: 74589-73

FL 1973-1984
FX 1973-1984
FXST 1984-1993
FLST 1986-1993
FLT 1979-1993
XL 1973-UP

DRAG SPECIALTIES Chrome Cable Clamp, Idle, Throttle, Natural, size 1"
OEM No: 74523-92A Chrome Accel voltage regulator is 22 amp. Fits: XL 1992-1993 UOM: 1 - EA Country of Origin: USA

DRAG SPECIALTIES Chrome Cable Clamp, Natural

Volt Tech high torque starter motor is 1.4kW field wound type. Stock starter motor is 1.2 kW field wound type.
Polished chrome unit has all aluminum parts polished and all steel parts are chrome plated. Unit is supplied with jackshaft bolt.

F

DRAG SPECIALTIES Chrome Cable Clamp, Natural, 39mm

Primary wire is 100% multi-stranded copper wire with PVC insulation. Primary wire is 18 gauge, 45 foot roll in red.
Ideal for replacing or rewiring part or all of the system. Brightly color coded for ease of installation.

All models

DRAG SPECIALTIES Chrome Die-Cast Cable Clamp, Idle, Throttle, Natural, size 1 1/4"
Throttle by wire +4" extension harness kit is for the right side only and has 6 wires total, without cruise. This harness fits the Molex Connector. Order switch housing wire kit separately for right and left side. Fits: FLT 2008-UP

DRAG SPECIALTIES Gloss Black Cable Clamp, 41mm

Volt Tech high torque starter motor is 1.4kW field wound type. Stock starter motor is 1.2 kW field wound type.
Black unit is powder coated and supplied with jackshaft bolt.

FXST 1989-2006
FLST 1989-2006
FLT 1989-2006
FXD 1991-2005

DRAG SPECIALTIES Gloss Black Cable Clamp, Brake, Idle, Throttle, size 1 1/2"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire kits are designed for electronic ignitions but work great on point type ignitions. Wire kit is purple 8mm type.

FXST 2000-UP

DRAG SPECIALTIES Gloss Black Cable Clamp, Brake, Idle, Throttle, size 1 1/4"

Sumax spark plug wire set are pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire set are designed for electronic ignitions but work great on point type ignitions. Wire kit is black 8mm type.

FLT 1999-UP

DRAG SPECIALTIES Gloss Black Cable Clamp, Brake, Idle, Throttle, size 1 1/8"

This extreme duty battery cable set features #2 gauge wires which are very fat and flexible. The battery cables will transfer more cranking power with the very lease amount of voltage drop.
Over 2000 bare strands of copper are covered with special v

DRAG SPECIALTIES Gloss Black Cable Clamp, Clutch, size 1 1/2"

Splitfire dual mag 7mm spark plug wire set incorporates two premium magnetic suppression core conductors, which are protected by a layer of braided fiberglass and a 100% pure silicone outer jacket.

XL 1985-1998

DRAG SPECIALTIES Gloss Black Cable Clamp, Clutch, size 1 1/4"

This extreme duty battery cable set features #2 gauge wires which are very fat and flexible. The battery cables will transfer more cranking power with the very lease amount of voltage drop.
Over 2000 bare strands of copper are covered with special v

DRAG SPECIALTIES Gloss Black Cable Clamp, Clutch, size 1 1/8"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire kits are designed for electronic ignitions but work great on point type ignitions. Wire kit is red 8mm type.

FXST 2000-UP
F