All

25 products

25 products

ANDREWS Black Cam Drive Gear, Harley 78-99 FX 78-99 FL 87 - 94 XL
Andrews
$66.95
ANDREWS Orange Cam Drive Gear, 2.7324", Undersize, Harley 78-99 FX 78-99 FL 87 - 94 XL
Andrews
$63.95
ANDREWS Red Cam Drive Gear, 2.7364", Standard, Harley 78-99 FX 78-99 FL 87 - 94 XL
Andrews
$66.95
Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only 1999-2006 BT (Ex 2006 Dyna)
Mid-USA
$670.00
Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only Fits 2007-2015 BT, Dyna 2006
Mid-USA
$635.00
Cam Shims .005" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6770.....Mfg.2250
Mid-USA
$6.75
Gear Case Part,Brthr Gear Shim Big Twin 1950/E.79 .125" Thick Rpls Hd 25315-50
Mid-USA
$11.57
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .115" Thick Rpls Hd 25321-79
Mid-USA
$11.57
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .120" Thick Rpls Hd 25322-79
Mid-USA
$14.90
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .125" Thick Rpls Hd 25323-79
Mid-USA
$11.57
Gear Case Part,Cam Shim .007" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6769....Mfg.2249
Mid-USA
$6.75
Gear Case Part,Oil Pump Dr Gr BT 36/L(Ex Tc88)Uw/66040/66041 #66080 Rpls Hd 26345-73 Jims
Mid-USA
$94.05
Gear Case Part,Oil Pump Gear BT 54/89 Use 66079/Hd 26345-73 Rpls Hd 26349-73A & 84 Jims
Mid-USA
$101.85
Gear Drive Installation Kit BT 07/L* & 06 Dyna Models Uw Gear Drive Cams,Ap 216901
Mid-USA
$51.05
Pinion Gear,Black Jims Big Twin Late 1977/1989 Rpls Hd 24046-78 Jims 24046-78
Mid-USA
$184.85
Pinion Gear,Red All Big Twin 1954/Early 1977 Rpl Hd 24010-54..Jims 24010-Re
Mid-USA
$214.75
Pinion Gear,Red Jims Fits Big Twin Late 1977/1989 Rpls Hd 24043-78....Jims
Mid-USA
$184.85
S&S CYCLE Camshaft Pinion Gear, Each, Oversize, Harley 99-16 FX 99-16 FL
S&S Cycle
$132.95
S&S CYCLE Camshaft Pinion Gear, Each, Undersize, Harley 99-16 FX 99-16 FL
S&S Cycle
$132.95
S&S CYCLE Four-Gear Set For Gear Driven Cams, 4-Pack, Harley 06-16 FX 07-16 FL
S&S Cycle
$634.95
Thrust Washer Cam Gear .050"Tk Big Twin 1936/1990 Rpls Hd 25550-36 #7201
Mid-USA
$11.20
Sold Out
V-Twin Manufacturing Cam Chest Assembly Kit Evolution includes 140 cam, fits 1987-1998
V-Twin Manufacturing
$340.51
V-Twin Manufacturing Drive Gear, 1984-89
V-Twin Manufacturing
$41.42
V-Twin Manufacturing Drive Gear, 1990-92
V-Twin Manufacturing
$40.07
V-Twin Manufacturing Drive Gear, 1993-up
V-Twin Manufacturing
$39.69
ANDREWS Black Cam Drive Gear, Harley 78-99 FX 78-99 FL 87 - 94 XL Harley Andrews - K and G Cycles
Andrews

ANDREWS Black Cam Drive Gear, Harley 78-99 FX 78-99 FL 87 - 94 XL

DS-09250581

$66.95

In Stock

Save $-66.95
/
Shipping calculated at checkout.
ANDREWS Black Cam Drive Gear, Harley 78-99 FX 78-99 FL 87 - 94 XL
  • High-quality heat-treated gears
  • Available in undersize, std. and oversize
  • Made in the U.S.A.
ANDREWS Orange Cam Drive Gear, 2.7324", Undersize, Harley 78-99 FX 78-99 FL 87 - 94 XL Harley Andrews - K and G Cycles
Andrews

ANDREWS Orange Cam Drive Gear, 2.7324", Undersize, Harley 78-99 FX 78-99 FL 87 - 94 XL

DS-09250577

$63.95

In Stock

Save $-63.95
/
Shipping calculated at checkout.
ANDREWS Orange Cam Drive Gear, 2.7324", Undersize, Harley 78-99 FX 78-99 FL 87 - 94 XL
  • High-quality heat-treated gears
  • Available in undersize, std. and oversize
  • Made in the U.S.A.
ANDREWS Red Cam Drive Gear, 2.7364", Standard, Harley 78-99 FX 78-99 FL 87 - 94 XL Harley Andrews - K and G Cycles
Andrews

ANDREWS Red Cam Drive Gear, 2.7364", Standard, Harley 78-99 FX 78-99 FL 87 - 94 XL

DS-09250579

$66.95

In Stock

Save $-66.95
/
Shipping calculated at checkout.
ANDREWS Red Cam Drive Gear, 2.7364", Standard, Harley 78-99 FX 78-99 FL 87 - 94 XL
  • High-quality heat-treated gears
  • Available in undersize, std. and oversize
  • Made in the U.S.A.
Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only 1999-2006 BT (Ex 2006 Dyna) Harley Mid-USA - K and G Cycles
Mid-USA

Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only 1999-2006 BT (Ex 2006 Dyna)

MID-66021

$670.00

In Stock

Save $-670.00
/
Shipping calculated at checkout.
Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only 1999-2006 Bt (Ex 2006 Dyna)
  • Includes front and rear inner cam gears, pinion gear and outer cam gear
  • Sold as kit
S & S
Fits Big Twin models 1999/2006 (except Dyna 2006)
Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only Fits 2007-2015 BT, Dyna 2006 Harley Mid-USA - K and G Cycles
Mid-USA

Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only Fits 2007-2015 BT, Dyna 2006

MID-66022

$635.00

In Stock

Save $-635.00
/
Shipping calculated at checkout.
Cam Gear Drive Kits, Use With Gear Drive Cam Kits Only Fits 2007-2015 Bt, Dyna 2006
  • Includes front and rear inner cam gears, pinion gear and outer cam gear
  • Sold as kit
S & S
Fits Big Twin models 2007/2015 & Dyna 2006
Cam Shims .005" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6770.....Mfg.2250 Harley Mid-USA - K and G Cycles
Mid-USA

Cam Shims .005" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6770.....Mfg.2250

MID-66029

$6.75

In Stock

Save $-6.75
/
Shipping calculated at checkout.
Cam Shims .005" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6770.....Mfg.2250
HARDWARE
Cam Shim - .005
Fits 45ci all years, K Model & Sportster 1954/1985
Package of 10
Replaces HD# 6770
Gear Case Part,Brthr Gear Shim Big Twin 1950/E.79 .125" Thick Rpls Hd 25315-50 Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Brthr Gear Shim Big Twin 1950/E.79 .125" Thick Rpls Hd 25315-50

MID-66083

$11.57

In Stock

Save $-11.57
/
Shipping calculated at checkout.
Gear Case Part,Brthr Gear Shim Big Twin 1950/E.79 .125" Thick Rpls Hd 25315-50
A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195 I.D. and Late 1979/1982 that have a .334 I.D. These steel shims are designed to be used with steel breather valve/gears only.Shim .125. 1950/1979. Sold in packages of 5
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .115" Thick Rpls Hd 25321-79 Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Brthr Gear Shim Big Twin L79/82 .115" Thick Rpls Hd 25321-79

MID-66086

$11.57

In Stock

Save $-11.57
/
Shipping calculated at checkout.
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .115" Thick Rpls Hd 25321-79
A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195 I.D. and Late 1979/1982 that have a .334 I.D. These steel shims are designed to be used with steel breather valve/gears only.Shim .115. Late 1979/1982. Sold in packages of 5
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .120" Thick Rpls Hd 25322-79 Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Brthr Gear Shim Big Twin L79/82 .120" Thick Rpls Hd 25322-79

MID-66087

$14.90

In Stock

Save $-14.90
/
Shipping calculated at checkout.
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .120" Thick Rpls Hd 25322-79
A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195 I.D. and Late 1979/1982 that have a .334 I.D. These steel shims are designed to be used with steel breather valve/gears only.Shim .120. Late 1979/1982. Sold in packages of 5
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .125" Thick Rpls Hd 25323-79 Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Brthr Gear Shim Big Twin L79/82 .125" Thick Rpls Hd 25323-79

MID-66088

$11.57

In Stock

Save $-11.57
/
Shipping calculated at checkout.
Gear Case Part,Brthr Gear Shim Big Twin L79/82 .125" Thick Rpls Hd 25323-79
A breather valve/gear with too much end play will knock. Any time the gear cover is removed it is standard procedure to set the end play on the breather valve/gear. Shims are available for 1950/Early 1979 that have a .195 I.D. and Late 1979/1982 that have a .334 I.D. These steel shims are designed to be used with steel breather valve/gears only.Shim .125. Late 1979/1982. Sold in packages of 5
Gear Case Part,Cam Shim .007" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6769....Mfg.2249 Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Cam Shim .007" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6769....Mfg.2249

MID-66030

$6.75

In Stock

Save $-6.75
/
Shipping calculated at checkout.
Gear Case Part,Cam Shim .007" K Ihd Spt 54/85,45Ci All Yrs Replaces Hd #6769....Mfg.2249
HARDWARE
Cam Shim - .007
Fits 45ci all years, K Model & Sportster 1954/1985
Package of 10
Replaces HD# 6769
Gear Case Part,Oil Pump Dr Gr BT 36/L(Ex Tc88)Uw/66040/66041 #66080 Rpls Hd 26345-73 Jims Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Oil Pump Dr Gr BT 36/L(Ex Tc88)Uw/66040/66041 #66080 Rpls Hd 26345-73 Jims

MID-66079

$94.05

In Stock

Save $-94.05
/
Shipping calculated at checkout.
Gear Case Part,Oil Pump Dr Gr Bt 36/L(Ex Tc88)Uw/66040/66041 #66080 Rpls Hd 26345-73 Jims
Drive Shaft Drive Gear, 24 Teeth fits Big Twin 1936/Later engines (except Twin Cam 88). Must be used with 6 Teeth Pinion Shaft Drive Gear.
Gear Case Part,Oil Pump Gear BT 54/89 Use 66079/Hd 26345-73 Rpls Hd 26349-73A & 84 Jims Harley Mid-USA - K and G Cycles
Mid-USA

Gear Case Part,Oil Pump Gear BT 54/89 Use 66079/Hd 26345-73 Rpls Hd 26349-73A & 84 Jims

MID-66080

$101.85

In Stock

Save $-101.85
/
Shipping calculated at checkout.
Gear Case Part,Oil Pump Gear Bt 54/89 Use 66079/Hd 26345-73 Rpls Hd 26349-73A & 84 Jims
Pinion Shaft Drive Gear, 6 Teeth fits Big Twin 1954/1989 engines. Must be used with gear 66039, 66079 or HD 26345-73 (24 teeth) Drive Shaft Drive Gear.
Gear Drive Installation Kit BT 07/L* & 06 Dyna Models Uw Gear Drive Cams,Ap 216901 Harley Mid-USA - K and G Cycles
Mid-USA

Gear Drive Installation Kit BT 07/L* & 06 Dyna Models Uw Gear Drive Cams,Ap 216901

MID-66017

$51.05

In Stock

Save $-51.05
/
Shipping calculated at checkout.
Gear Drive Installation Kit Bt 07/L* & 06 Dyna Models Uw Gear Drive Cams,Ap 216901
  • Reduced maintenance (no plastic chain guides or tension shoes to wear and contaminate engine oil or clog oil passages)
  • Cam timing remains constant; all drive and cam gears utilize a light press fit (gear lash) thus eliminating any chain stretch
  • Bearing loads are reduced; no chain tensioners are used which can rob horsepower
  • Critical sprocket alignment is unnecessary
  • To ease installation and eliminate the need to remove the fuel tank and rocker covers, use our adjustable pushrods found in the engine section
  • Includes instructions
Andrews Drive Installation Kit
Required Kit for Gear Drive Cam
Fits Twin Cam 2007/Later & Dyna models 2006
Pinion Gear,Black Jims Big Twin Late 1977/1989 Rpls Hd 24046-78 Jims 24046-78 Harley Mid-USA - K and G Cycles
Mid-USA

Pinion Gear,Black Jims Big Twin Late 1977/1989 Rpls Hd 24046-78 Jims 24046-78

MID-66070

$184.85

In Stock

Save $-184.85
/
Shipping calculated at checkout.
Pinion Gear,Black Jims Big Twin Late 1977/1989 Rpls Hd 24046-78 Jims 24046-78
These high quality American made Pinion Gears offer engine builders the most common sizes needed when installing performance cams or rebuilding motors. Cam and pinion gears must be matched for pitch diameter to provide correct gear lash. If the gear lash is too tight the motor will whine. If the gear lash is too loose the motor will knock. Most aftermarket cams come with red color coded gears. A cam of a certain color code usually should be used with a pinion gear of the same color code, but matching tolerance variations in the crankcase and the cam cover may require the use of a larger or smaller pinion gear. Geras are measured over two .105 gauge pins. Fits Big Twin 1939/1989 as listed.JIMS Pinion Gear or Tapered Shaft Big Twin Late 1977/1989. Color code: Black. Diameter over 1.05 pins: 1.4710/1.4715. Replaces HD# 24046-78
Pinion Gear,Red All Big Twin 1954/Early 1977 Rpl Hd 24010-54..Jims 24010-Re Harley Mid-USA - K and G Cycles
Mid-USA

Pinion Gear,Red All Big Twin 1954/Early 1977 Rpl Hd 24010-54..Jims 24010-Re

MID-66050

$214.75

In Stock

Save $-214.75
/
Shipping calculated at checkout.
Pinion Gear,Red All Big Twin 1954/Early 1977 Rpl Hd 24010-54..Jims 24010-Re
These high quality American made Pinion Gears offer engine builders the most common sizes needed when installing performance cams or rebuilding motors. Cam and pinion gears must be matched for pitch diameter to provide correct gear lash. If the gear lash is too tight the motor will whine. If the gear lash is too loose the motor will knock. Most aftermarket cams come with red color coded gears. A cam of a certain color code usually should be used with a pinion gear of the same color code, but matching tolerance variations in the crankcase and the cam cover may require the use of a larger or smaller pinion gear. Geras are measured over two .105 gauge pins. Fits Big Twin 1939/1989 as listed.JIMS Pinion Gear for Tapered Shaft Big Twin 1954/Early 1977. Color code: Red. Diameter over .105 pins: 1.4475/1.4480. Replaces HD# 24010-54
Pinion Gear,Red Jims Fits Big Twin Late 1977/1989 Rpls Hd 24043-78....Jims Harley Mid-USA - K and G Cycles
Mid-USA

Pinion Gear,Red Jims Fits Big Twin Late 1977/1989 Rpls Hd 24043-78....Jims

MID-66053

$184.85

In Stock

Save $-184.85
/
Shipping calculated at checkout.
Pinion Gear,Red Jims Fits Big Twin Late 1977/1989 Rpls Hd 24043-78....Jims
These high quality American made Pinion Gears offer engine builders the most common sizes needed when installing performance cams or rebuilding motors. Cam and pinion gears must be matched for pitch diameter to provide correct gear lash. If the gear lash is too tight the motor will whine. If the gear lash is too loose the motor will knock. Most aftermarket cams come with red color coded gears. A cam of a certain color code usually should be used with a pinion gear of the same color code, but matching tolerance variations in the crankcase and the cam cover may require the use of a larger or smaller pinion gear. Geras are measured over two .105 gauge pins. Fits Big Twin 1939/1989 as listed.JIMS Pinion Gear or Tapered Shaft Big Twin Late 1977/1989. Color code: Red. Diameter over .105 pins: 1.4729/1.4737. Replaces HD# 24043-78
S&S CYCLE Camshaft Pinion Gear, Each, Oversize, Harley 99-16 FX 99-16 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE Camshaft Pinion Gear, Each, Oversize, Harley 99-16 FX 99-16 FL

DS-09250095

$132.95

In Stock

Save $-132.95
/
Shipping calculated at checkout.
S&S CYCLE Camshaft Pinion Gear, Each, Oversize, Harley 99-16 FX 99-16 FL
  • A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware
  • Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized gears are available to help achieve correct gear lash
  • Made in the U.S.A.
S&S CYCLE Camshaft Pinion Gear, Each, Undersize, Harley 99-16 FX 99-16 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE Camshaft Pinion Gear, Each, Undersize, Harley 99-16 FX 99-16 FL

DS-09250094

$132.95

In Stock

Save $-132.95
/
Shipping calculated at checkout.
S&S CYCLE Camshaft Pinion Gear, Each, Undersize, Harley 99-16 FX 99-16 FL
  • A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware
  • Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized gears are available to help achieve correct gear lash
  • Made in the U.S.A.
S&S CYCLE Four-Gear Set For Gear Driven Cams, 4-Pack, Harley 06-16 FX 07-16 FL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE Four-Gear Set For Gear Driven Cams, 4-Pack, Harley 06-16 FX 07-16 FL

DS-09250152

$634.95

In Stock

Save $-634.95
/
Shipping calculated at checkout.
S&S CYCLE Four-Gear Set For Gear Driven Cams, 4-Pack, Harley 06-16 FX 07-16 FL
  • A four-gear set is required for gear-driven cams that do not come with secondary cam gears; includes two secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware
  • Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams; oversized and undersized gears are available to help achieve correct gear lash
  • Made in the U.S.A.
Thrust Washer Cam Gear .050"Tk Big Twin 1936/1990 Rpls Hd 25550-36 #7201 Harley Mid-USA - K and G Cycles
Mid-USA

Thrust Washer Cam Gear .050"Tk Big Twin 1936/1990 Rpls Hd 25550-36 #7201

MID-66219

$11.20

In Stock

Save $-11.20
/
Shipping calculated at checkout.
Thrust Washer Cam Gear .050"Tk Big Twin 1936/1990 Rpls Hd 25550-36 #7201
  • Set your cam shaft end play right to factory specifications with these hardened thrust washers
HARDWARE
.050 thick, Package of 5
Fits OHV Big Twin 1936/1990 & Big Twin Evolution 1991/Later when using aftermarket cam
Replaces HD# 25550-36
V-Twin Manufacturing Drive Gear, 1984-89 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Drive Gear, 1984-89

VT-12-1392

$41.42

In Stock

Save $-41.42
/
Shipping calculated at checkout.
V-Twin Manufacturing Drive Gear, 1984-89 - Sold Each

Oil pump drive gear

OEM: 26349-84


FXST 1984-1989
FLT 1984-1989
FXR 1984-1989
FLST 1986-1989
V-Twin Manufacturing Drive Gear, 1990-92 Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Drive Gear, 1990-92

VT-12-1438

$40.07

In Stock

Save $-40.07
/
Shipping calculated at checkout.
V-Twin Manufacturing Drive Gear, 1990-92 - Sold Each

OE oil pump drive gear

OEM: 26354-90


FXST 1990-1992
FLST 1990-1992
FLT 1990-1992
FXR 1990-1992
FXD 1991-1992
V-Twin Manufacturing Drive Gear, 1993-up Harley V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Drive Gear, 1993-up

VT-12-1439

$39.69

In Stock

Save $-39.69
/
Shipping calculated at checkout.
V-Twin Manufacturing Drive Gear, 1993-up - Sold Each

Oil pump drive gear.

OEM: 26354-93


FXST 1993-UP
FLST 1993-UP
FLT 1993-UP
FXD 1993-UP