All

Adjustable Foot Rest Mount Kit Fits 1-1/4" Highway Bars,Cp U/W 1/2" Wide Male Mt Footrest

• 360° rotation at the arm and footrest mount to accommodate both the tall and short rider
• The hinged clamp firmly grips the highway bars
• Arm locks peg securely in position
• Use with 1/2 wide male mount footrests

V-FACTOR
Chrome Plated Kit
Fits 1 1/4 highway bars
Replaces HD# 50929-03

Hyw Bar Ft Mnt Billet Cp Fits 1-1/4"Bars Billet Aluminum

• Ball milled for custom look
• Use with 7/16 male mount footrest
• Available in billet aluminum for extra strength

V-FACTOR
Chrome Plated Billet Aluminum Kit
Fits all 1 1/4 O.D. bars

Peg Mount Kit For Highway Bars Fits 1-1/4"Od Bars Use 7/16"Mt Male Folding Footrests,Chrome

• Ball milled for custom look
• Use with 7/16 male mount footrest
• Available in billet aluminum for extra strength

V-FACTOR
Chrome Plated Cast Aluminum Kit
Fits all 1 1/4 O.D. bars

DRAG SPECIALTIES Black Passenger Floorboard Mounts, Gloss, Harley 93-15 FL

• Steel construction with a gloss black or chrome finish
• Come complete with mounting bolts, hinge pins and ball/spring stop
• Accept most OEM-style floorboards
• Available in two styles (standard and raised)
• Standard mounts are direct OEM replacements
• Raised mounts raise the floorboards approximately 21/2" higher for increased comfort over the standard version
• Sold in pairs

DRAG SPECIALTIES Black Passenger Floorboard Mounts, Harley 93-15 FL

• Steel construction with a gloss black or chrome finish
• Come complete with mounting bolts, hinge pins and ball/spring stop
• Accept most OEM-style floorboards
• Available in two styles (standard and raised)
• Standard mounts are direct OEM replacements
• Raised mounts raise the floorboards approximately 21/2" higher for increased comfort over the standard version
• Sold in pairs

DRAG SPECIALTIES Chrome Passenger Floorboard Mount Kit, Harley 00-10 FX 00-15 FL

• Available in chrome or black
• Include all necessary installation hardware and instructions
• Accept Drag Specialties passenger floorboards PART #1621-0463 or OEM H-D passenger floorboards (floorboards sold separately)

DRAG SPECIALTIES Chrome Passenger Floorboard Mounts, Harley 93-15 FL

• Steel construction with a gloss black or chrome finish
• Come complete with mounting bolts, hinge pins and ball/spring stop
• Accept most OEM-style floorboards
• Available in two styles (standard and raised)
• Standard mounts are direct OEM replacements
• Raised mounts raise the floorboards approximately 21/2" higher for increased comfort over the standard version
• Sold in pairs

Footboard Mount Flh 1970/1984 To Retain Rh Footboard W/Custom Exhaust Sys

• Use to replace right factory footboard mount if you want to retain footboards on an FLH custom exhaust systems
  Sold each

V-FACTOR
Cadmium Plated ootboard Bracket
Fits FLH models 1970/1984
(Imported)

Footpeg Mount Pair Large Od Female Chrome Plated
V-FACTOR
Replacement Part
Chrome Plated Large O.D. emale ootpeg Mount Pair

Footpeg Mount Pair Male, Chrome Plated
V-FACTOR
Replacement Part
Chrome Plated Male ootpeg Mount Pair

Footpeg Mount Pair Small Od Female, 5/8" Chrome Plated
V-FACTOR
Replacement Part
Chrome Plated Small O.D. emale ootpeg Mount Pair

Footrest Supports,Chrome Softail 2007/Later* Rpls Hd 51039-05

• These stock replacement footrest supports are exact duplicates of OEM parts
• Fits allHarley-Davidson^® and aftermarket small male footrests

V-FACTOR
Chrome Plated Pair
Fits Softail models 2007/Later
Replaces HD# 51039-05

Oe Style Rear Footrest Mounts All Spt Models 04/L* Chrome Rpls Hd 49314-04 & 49315-04

• Direct replacements for the black OEM mounts
• Required when converting a solo seat 883 to a two-up ride
• Use with footrests that have a ⁷/₁₆ wide male-type mount

V-FACTOR
Chrome Plated Mounts
Fits all Sportster models 2004/Later
Replaces HD# 49314-04 & 49315-04
(Imported)

Passenger Peg Mount Kit,Chrome Touring Models 1993-Later, 50198-97B

• Remove those oversized footboards on your touring model and replace them with these footpeg mount kits
• These offer a sport-touring look and accept the male mount footpegs found in the frame and body section
• Three adjustable height positions give passenger added comfort
• Includes mounting hardware

V-FACTOR
Chrome Plated Kit
Fits Touring models 1993/Later
Replaces HD# 50198-97B

V-Twin Manufacturing 00-Up R. Peg Support Yokes Only w-o Pins, 1.675 - PR

Chrome 2-3/4" long passenger yoke set without pins have an unthreaded 3/8" inner diameter frame mount hole and accepts 5/16" footpeg mount hole.
Unthreaded use with allen threw bolt, threads into mount on bike.
OEM: 50942-00

Custom applica

V-Twin Manufacturing 1 1/4" Bar Clamp Set - Set

Chrome footpeg mount clamp set will fit 1-1/4" engine bars to mount male footpeg sets.
Order footpegs separately.

V-Twin Manufacturing 1"ISO Peg Ext.(Male) - Set

Chrome 1" extended footpeg mount yoke set with male ends. For use with cats paw style footpeg set with female ends.

Custom application to extend pegs

Tech Note:

Suggested to use with #27-1627 footpeg set.

V-Twin Manufacturing 1982-90 XL Chrome Rear Peg Bracket - Sold Each

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.

OEM: 52709-82

XL 1982-1990

Tech Note:

Suggested to use with #27-1227 small male pegs

V-Twin Manufacturing 2006-up Chrome Peg Mount Set Mounts, Raised - Set

Chrome passenger footpeg mount set is the raised type. Features a 1.5" rise and is 2" more forward than stock.
Order male footpegs separately.

FXD 2006-UP
FXDWG 2006-UP

V-Twin Manufacturing 3.25"Long Chrome Foot Peg Mount Bar - Set

Chrome footpeg mount bars is 3.5" long and accept male mount pegs and mount with 1/2"-13 Thread Per Inch bolts.

Custom application to accept male end pegs

V-Twin Manufacturing 57-78XL Rear Footpeg Bracket Chrome XL - Sold Each

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.
Uses large female driver footpegs.

XL 1957-1978

Measurements:

Bracket Length: 5-3/4"
Bracket Width: 14"
Mount Width: 13-1

V-Twin Manufacturing 74-Up FL-FX Footpeg Mount Stud,Zinc - PR

Footpeg mount stud has 1/2" threads with a zinc finish.

OEM: 52683-74

FX 1974-1984
FL 1974-1984

V-Twin Manufacturing 83-Up Chrome FLH Floorboard Bracket (4 Pc) - Set

Chrome stock size footboard mount bracket set.

OEM: 47365-83C

FLT 1983-2008

V-Twin Manufacturing Billet Engine Bar Footpeg Mount, Chrome - PR
OEM No: 50957-02 Two-piece chrome billet engine bar footpeg mount Kit is manufactured from CNC machined billet aluminum and includes bolt, lock washer, and locknut. The clamps mount directly on your 1-1/4" engine guard or frame. This mount kit w

V-Twin Manufacturing Black Engine Bar Footpeg Mount, 54234-10 - PR
OEM No: 54234-10 Two piece black engine bar footpeg mount is manufactured from CNC machined billet aluminum and includes bolt, lock washer and locknut. Fits: Custom application for 1-1/4" engine bar UOM: 2 - PR Cou

V-Twin Manufacturing BT-Chrome,Rigid Rear Footpeg Mount Bracket - Sold Each

Chrome passenger footpeg mount bracket bolts to 4-speed transmission plate or can be mounted behind transmission on rigid frames by fabrication of mount strap.

Custom application for rigid frames

V-Twin Manufacturing Chrome 1" Footpeg Mount Clamp Set
Chrome 1" Footpeg Mount Clamp Set

Chrome 2 piece clamp set with 3/8" mounting hole and 1" inner diameter.

Fits Harley-Davidson models:
Custom application utilizes a 3/8" mounting hole


UOM: 1 - SET
Country of Origin: Imported

V-Twin Manufacturing Chrome Footboard Mount Set +2 Black 1983-08 - Set

Kit will move the footboards forward 2" and will leave the stock controls intact. Kit is a 4 piece set, includes all necessary hardware, and has a smooth black finish.

FLT 1983-2008

V-Twin Manufacturing Chrome Footpeg Mount Yoke 3/8x24 - Set

Chrome footpeg yoke set with 3/8"-24 thread. Yoke is 1" long.

Custom application utilizes a 3/8" mounting hole

Measurements:

Bolt: 3/8"-24

V-Twin Manufacturing Chrome Footpeg Support Yoke 1-2" Pr, 1977-84 FX - Set

Replica chrome rear footpeg mount will add both style and comfort to your ride.
With our mount you will be able to use or relocate your stock passenger footpegs to a more desirable location. The mount will accept male end style footpegs and have a 1

V-Twin Manufacturing Chrome L Foot Rest Support 86-90 XL - Sold Each

Chrome left footpeg support.

OEM: 50948-86A

XL 1986-1990

V-Twin Manufacturing Chrome Rear Foot Rest Support Offset, FX-FL. - Sold Each

Chrome splined footpeg support is for the right side and is offset type.

OEM: 52700-65

FL 1965-1977

V-Twin Manufacturing Chrome Rear Footpeg Mount Bracket Set, 1977-84 FX - Set

Chrome rear stock footpeg mount bracket set.

OEM: 47116-77

FX 1977-1984 Stock peg brackets