All

Antique Springer 18" Black Big Twin Custom Application Includes Axle Kit

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 18 length

Antique Springer 20" Cp Big Twin Custom Application Chrome Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Chrome Plated Springer, 20 length
Note: Same as vintage L

Antique Springer 24" Blk Big Twin Custom Application Black Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 24 length
Note: Same as modern XST Softail

Antique Springer 24" Cp Big Twin Custom Application Chrome Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Chrome Plated Springer, 24 length
Note: Same as modern XST Softail

Antique Springer 26" Blk Big Twin Custom Application Black Finish

• ully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparible to vintage L model fork length
• 1 O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4 between the axle rockers (Cast rockers)
• Includes 3/4 O.D. axle
• Rise mounts are on 4 3/4 centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8 hole)

HARDBODY
Gloss Black Springer, 26 length

Antique Springer 26" Cp Big Twin Custom Application Chrome Finish

• Fully assembled with in-line top bracket without built in rake (0° rake)
• The standard length Springer (20 measured from the bottom of the lower tree to the axle center) is comparable to vintage L model fork length
• 1" O.D. steering stem designed for Timken^® type bearings
• Use our Part 36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981
• Measures 8 3/4" between the axle rockers (Cast rockers)
• Includes 3/4" O.D. axle
• Rise mounts are on 4 3/4" centers and threaded 1/2"-20
• Universal brake rod mount is on the right rear leg for disc brakes (5/8" hole)

HARDBODY
Chrome Plated Springer, 26" length

Bottom Springer Shock Mount Replacement Bottom Shock Mount Used With #35310

• Kit bolts on to HARDBODY Springers for increased ride control
• Excellent upgrade for Springer front forks without built-in shock mounts
• Helps control spring action for a much smoother ride
• Includes mounting hardware

V-FACTOR
Chrome Plated Replacement Bottom Springer Shock Mount (pair)
Fits HARDBODY Springers
(Imported)

Custom Springer Neck Post Hardbody Wide Springers & Most Custom Wide Springers
HARDBODY
Neck Post (Sold Each)

10 3/8” LONG

1” DIAMETER

Custom Springer Rocker Studs Hardbody Wide Springers & Most Custom Wide Springers,Chrome
HARDBODY
Chrome Plated Rocker Studs (Set of 4)

Threaded diameter is 1/2"
Bearing surface 3/4"

Length of threaded part is 9/16”

DRAG SPECIALTIES Black Springer Fork +2", Harley 85-15 FX 86-15 FL 86 - 03 XL

• Economical alternative to a shock dampened-type Springer
• Fully assembled with an in-line top bracket without a built-in rake
• The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end
• 1" o.d. steering stem designed for Timken type bearings
• Both rear legs are threaded for right or left brakes
• The 3/4" o.d. axle kit includes a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 91/4" between Rockers
• Riser mounts are on 43/4" centers and threaded 1/2"-20
• Requires 84-99 wheel (compatible with 3/4" o.d. axle)
• These Springers are measured from the bottom of the top tree to the center of the axle

DRAG SPECIALTIES Black Springer Fork +4", Harley 85-15 FX 86-15 FL 86 - 03 XL

• Economical alternative to a shock dampened-type Springer
• Fully assembled with an in-line top bracket without a built-in rake
• The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end
• 1" o.d. steering stem designed for Timken type bearings
• Both rear legs are threaded for right or left brakes
• The 3/4" o.d. axle kit includes a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 91/4" between Rockers
• Riser mounts are on 43/4" centers and threaded 1/2"-20
• Requires 84-99 wheel (compatible with 3/4" o.d. axle)
• These Springers are measured from the bottom of the top tree to the center of the axle

DRAG SPECIALTIES Black Springer Fork -2", Harley 85-15 FX 86-15 FL 86 - 03 XL

• Economical alternative to a shock dampened-type Springer
• Fully assembled with an in-line top bracket without a built-in rake
• The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end
• 1" o.d. steering stem designed for Timken type bearings
• Both rear legs are threaded for right or left brakes
• The 3/4" o.d. axle kit includes a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 91/4" between Rockers
• Riser mounts are on 43/4" centers and threaded 1/2"-20
• Requires 84-99 wheel (compatible with 3/4" o.d. axle)
• These Springers are measured from the bottom of the top tree to the center of the axle

DRAG SPECIALTIES Chrome Springer Fork -2", Harley 85-15 FX 86-15 FL 86 - 03 XL

• Economical alternative to a shock dampened-type Springer
• Fully assembled with an in-line top bracket without a built-in rake
• The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end
• 1" o.d. steering stem designed for Timken type bearings
• Both rear legs are threaded for right or left brakes
• The 3/4" o.d. axle kit includes a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 91/4" between Rockers
• Riser mounts are on 43/4" centers and threaded 1/2"-20
• Requires 84-99 wheel (compatible with 3/4" o.d. axle)
• These Springers are measured from the bottom of the top tree to the center of the axle

DRAG SPECIALTIES Chrome Springer Fork Standard, Harley 85-15 FX 86-15 FL 86 - 03 XL

• Economical alternative to a shock dampened-type Springer
• Fully assembled with an in-line top bracket without a built-in rake
• The standard length Springer (31" measured from top bearing to the axle) is comparable to a standard-length FXST front end
• 1" o.d. steering stem designed for Timken type bearings
• Both rear legs are threaded for right or left brakes
• The 3/4" o.d. axle kit includes a brake mount pivot with thrust washer, speedometer drive adapter and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 91/4" between Rockers
• Riser mounts are on 43/4" centers and threaded 1/2"-20
• Requires 84-99 wheel (compatible with 3/4" o.d. axle)
• These Springers are measured from the bottom of the top tree to the center of the axle

Front Axle For Springer. Copper, fits Most custom springers

HARDBODY
Copper 3/4" O.D. ront Axle Kit
Includes axle, spacers & nuts

Frt.Axle 3/4 For M/U Springer Use With Most Custom Springers Inc Axle,Spacers,Nuts
HARDBODY
Axle Kit with Chrome Nuts

Lower External Spring Set Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower External Spring Set (Sold as Pair)

Lower Internal Spring Set Cp Use With Custom Springers Sold In A Pair
HARDBODY
Chrome Plated Lower Internal Spring Set (Sold as Pair)

HARDBODY

Spring Kit for Springer Forks Use with Most Custom Springers Inc Springs, Rods, Seats & Nuts

Spring Rod Acorn Nut Set 1/2-20 Thread,Custom Springers
HARDBODY
Chrome Plated Spring Rod Nut
1/2-20 Acorn Nut Pair

Springer Fr Gen II,+10" Os,Blk Custom App Most Mdls W/1" Stem Inc Stem Nuts & Top Clamp

• Rocker grease fittings
• ully assembled with a forged in-line top bracket without a built-in rake
• The standard length Springer (24 measured from the bottom bearing to the axle center) is comparable to a standard length XST front end
• 1 O.D. steering stem designed for Timken^® type bearings
• Both rear legs are threaded for right or left brakes
• orged rockers for superior strength
• Rear legs are 1 piece from the rocker to the top tree
• The 3/4 O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 9 1/4 between rockers
• Riser mounts are on 4 3/4 centers and threaded 1/2-20

HARDBODY
Black Springer
+10 Length, 34 Dimensions

Springer Fr Gen II,+2" Os, Cp Custom App Most Mdls W/1" Stem Inc Stem Nuts & Top Clamp

• Rocker grease fittings
• ully assembled with a forged in-line top bracket without a built-in rake
• The standard length Springer (24 measured from the bottom bearing to the axle center) is comparable to a standard length XST front end
• 1 O.D. steering stem designed for Timken^® type bearings
• Both rear legs are threaded for right or left brakes
• orged rockers for superior strength
• Rear legs are 1 piece from the rocker to the top tree
• The 3/4 O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 9 1/4 between rockers
• Riser mounts are on 4 3/4 centers and threaded 1/2-20

HARDBODY
Chrome Plated Springer
+2 Length, 26 Dimensions

Springer Fr Gen II,+4" Os, Cp Custom App Most Mdls W/1" Stem Inc Stem Nuts & Top Clamp

• Rocker grease fittings
• ully assembled with a forged in-line top bracket without a built-in rake
• The standard length Springer (24 measured from the bottom bearing to the axle center) is comparable to a standard length XST front end
• 1 O.D. steering stem designed for Timken^® type bearings
• Both rear legs are threaded for right or left brakes
• orged rockers for superior strength
• Rear legs are 1 piece from the rocker to the top tree
• The 3/4 O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 9 1/4 between rockers
• Riser mounts are on 4 3/4 centers and threaded 1/2-20

HARDBODY
Chrome Plated Springer
+4 Length, 28 Dimensions

Springer Fr Gen II,+4" Os,Blk Custom App Most Mdls W/1" Stem Inc Stem Nuts & Top Clamp

• Rocker grease fittings
• ully assembled with a forged in-line top bracket without a built-in rake
• The standard length Springer (24 measured from the bottom bearing to the axle center) is comparable to a standard length XST front end
• 1 O.D. steering stem designed for Timken^® type bearings
• Both rear legs are threaded for right or left brakes
• orged rockers for superior strength
• Rear legs are 1 piece from the rocker to the top tree
• The 3/4 O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 9 1/4 between rockers
• Riser mounts are on 4 3/4 centers and threaded 1/2-20

HARDBODY
Black Springer
+4 Length, 28 Dimensions

Springer Fr Gen II,+6" Os,Blk Custom App Most Mdls W/1" Stem Inc Stem Nuts & Top Clamp

• Rocker grease fittings
• ully assembled with a forged in-line top bracket without a built-in rake
• The standard length Springer (24 measured from the bottom bearing to the axle center) is comparable to a standard length XST front end
• 1 O.D. steering stem designed for Timken^® type bearings
• Both rear legs are threaded for right or left brakes
• orged rockers for superior strength
• Rear legs are 1 piece from the rocker to the top tree
• The 3/4 O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 9 1/4 between rockers
• Riser mounts are on 4 3/4 centers and threaded 1/2-20

HARDBODY
Black Springer
+6 Length, 30 Dimensions

Springer Fr Gen II,+8" Os,Blk Custom App Most Mdls W/1" Stem Inc Stem Nuts & Top Clamp

• Rocker grease fittings
• ully assembled with a forged in-line top bracket without a built-in rake
• The standard length Springer (24 measured from the bottom bearing to the axle center) is comparable to a standard length XST front end
• 1 O.D. steering stem designed for Timken^® type bearings
• Both rear legs are threaded for right or left brakes
• orged rockers for superior strength
• Rear legs are 1 piece from the rocker to the top tree
• The 3/4 O.D. axle kit includes a brake mount pivot with thrust washer and hub spacers (custom spacers may be required depending on the wheel used)
• Measures 9 1/4 between rockers
• Riser mounts are on 4 3/4 centers and threaded 1/2-20

HARDBODY
Black Springer
+8 Length, 32 Dimensions