Name: COMETIC STREET GASKET, Set, Rebuild, Gasket Kit, Yamaha YZF-R1, Yamaha 98-03
Brand: Cometic
SKU: DS-C8588X
Price: 36.95 USD
Availability: InStock

Cometic

COMETIC STREET GASKET, Set, Rebuild, Gasket Kit, Yamaha YZF-R1, Yamaha 98-03

DS-C8588X

$36.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, Set, Rebuild, Gasket Kit, Yamaha YZF-R1, Yamaha 98-03

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Lower End Gasket Kit, Set, Rebuild, Suzuki 99-14

DS-C8587X

$88.95

In Stock

Shipping calculated at checkout.

COMETIC Lower End Gasket Kit, Set, Rebuild, Suzuki 99-14

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Cometic Gasket, bore size 93mm, 1299cc-1428cc, Set, Base, thickness .010", Suzuki 99-14

DS-C8585X

$36.95

In Stock

Shipping calculated at checkout.

COMETIC Cometic Gasket, bore size 93mm, 1299cc-1428cc, Set, Base, thickness .010", Suzuki 99-14

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC STREET GASKET, Fiber, Set, thickness .039", Kawasaki 81-83

DS-C8468

$24.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, Fiber, Set, thickness .039", Kawasaki 81-83

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC STREET GASKET, Set, Rebuild, Gasket Kit, Suzuki 96-99

DS-C8403

$32.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, Set, Rebuild, Gasket Kit, Suzuki 96-99

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC STREET GASKET, 1109cc, Set, Head, Kawasaki 90-01

DS-C8273

$101.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, 1109cc, Set, Head, Kawasaki 90-01

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC STREET GASKET, Fiber, Set, thickness .047", Kawasaki 73-80

DS-C8263X

$24.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, Fiber, Set, thickness .047"

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC STREET GASKET, Fiber, Set, thickness .047", Suzuki 80-86 GS1100/50

DS-C8212

$24.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, Fiber, Set, thickness .047", Suzuki 80-86 GS1100/50

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC STREET GASKET, bore size 3.210", 1000cc-1200cc, Fiber, Set, Base, thickness .020", Kawasaki 81-01

DS-C8093

$16.95

In Stock

Shipping calculated at checkout.

COMETIC STREET GASKET, bore size 3.210", 1000cc-1200cc, Fiber, Set, Base, thickness .020", Kawasaki 81-01

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Kawasaki 03-08

DS-09344042

$22.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Suzuki 01-08

DS-09344041

$17.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Stator Gasket, Yamaha 04-08

DS-09344038

$7.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Stator Gasket, Suzuki 78-83

DS-09344035

$18.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Suzuki 78-80

DS-09344034

$18.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Triumph 06-15

DS-09344033

$34.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Stator Gasket, Kawasaki 01-06

DS-09344031

$14.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Stator Gasket, Suzuki 01-02

DS-09344029

$11.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Honda 00-07

DS-09344028

$21.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Stator Gasket, Honda 00-07

DS-09344027

$11.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator/Magneto Cover Gasket, Each, Stator Gasket, Honda 99-06

DS-09344026

$11.95

In Stock

Shipping calculated at checkout.

COMETIC Stator/Magneto Cover Gasket, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Yamaha 98-03

DS-09344016

$9.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Each, Stator Gasket, Yamaha 98-03

DS-09344015

$7.95

In Stock

Shipping calculated at checkout.

COMETIC Stator COVER GASKET, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Each, Stator Gasket, Suzuki 99-14

DS-09344014

$14.95

In Stock

Shipping calculated at checkout.

COMETIC Stator COVER GASKET, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Suzuki 99-14

DS-09344013

$20.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Kawasaki 11-15

DS-09344011

$30.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Yamaha 74-82

DS-09344009

$19.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Honda 71-78

DS-09344006

$24.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket,, Each, Kawasaki 07-12

DS-09344004

$30.95

In Stock

Shipping calculated at checkout.

COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Each, Stator Gasket, Suzuki 06-14

DS-09344003

$15.95

In Stock

Shipping calculated at checkout.

COMETIC Stator COVER GASKET, made in the usa, Each, specific application, Stator Gasket

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Stator Cover Gasket, Kawasaki 07-12

DS-09344000

$20.95

In Stock

Shipping calculated at checkout.

COMETIC Stator Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 06-14 ZX-14 Ninja

DS-09343995

$24.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Yamaha 06-14

DS-09343994

$21.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures

Cometic

COMETIC Clutch Cover Gasket, Kawasaki 86-12

DS-09343993

$23.95

In Stock

Shipping calculated at checkout.

COMETIC Clutch Cover Gasket, made in the usa, specific application

Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
Materials may vary depending on what is correct and engineered for specified application
Each PART # contains the proper amount of gaskets for one application
Made in the U.S.A.

HEAD AND BASE GASKETS

Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
Sold each
Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
Made from AFM material for longevity
No gasket sealants or silicon bead is required, re-torque is also not required
Sold each

VALVE COVER GASKETS

Made from AFM or thick fiber material depending on application
Sold each

EXHAUST GASKETS

Sold as a set per application
Exhaust gaskets are made for extreme temperatures