Custom Dynamics

Light Wizard Starter Kit

• All Magical Wizard kits include a wiring diagram, complete installation kit and standard or Bluetooth-compatible (Android and IOS applications) Color Command™ 5 remote control


• Remote allows user to select one of seven pre-programmed colors, pick a custom color or continuously rotate through all the colors at a user-selected speed and select one of three breathe speeds or one of three strobe patterns


• All Magical Wizard accent lights are pre-taped with 3M double-sided tape and have minimum of 60" of wire; Magical Wheel lights have 84" of wire


• Starter kit includes four LED pods; standard kit includes six LED pods; super kit includes eight LED pods


• Magical Wizard lights work great under saddlebags and on frame rails as ground effect


• Wheel lights offer 12 LEDs in an oval disk shape that gives a 360° light output when mounted to the back side of a flat brake caliper with a minimum of 5/8" clearance between the wheel and caliper


• Magical Wizard pods, strips and wheel lights can be used in conjunction with any Magical Wizard kit

CUSTOM DYNAMICS LED Front Fender Tip Replacement Bulbs, White, Each, specific application

• Convert the front fender tip lights from a stock running light to a LED dual-function running and turn signal lights
• Stock-style plugs
• Sold in pairs

CUSTOM DYNAMICS LED Front Fender Tip Replacement Bulbs, Amber, Each, specific application

• Convert the front fender tip lights from a stock running light to a LED dual-function running and turn signal lights
• Stock-style plugs
• Sold in pairs

CUSTOM DYNAMICS Smart Triple Play, Brake, LED, Plug-and-Play, Run, Turn, Converter Kit

• Converts rear turn signals to run-brake-turn
• Works with LEDs or incandescent bulbs
• Ten user-selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake)
• Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight
• Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns & center taillight
• Built-in short circuit protection
• Sealed, weather-tight case
• Slim line design: 4.2" x 1.4" x .6"

CUSTOM DYNAMICS MODULE KIT 4 WAY HAZARD, Four-Way

• Adds 4-way hazards to metric bikes
• Works with LEDs or incandescent bulbs
• Includes rocker switch to activate hazards, installation kit and instructions

CUSTOM DYNAMICS Diode Kit, LED

• For metric cruisers with one turn signal indicator bulb
• Kit is required when front turn signal bulbs are replaced with LEDs

CUSTOM DYNAMICS Standard DOT Flasher, wattage 120

• Replaces stock 2- or 3-pin flashers on most metric bikes
• Only one unit needed when replacing stock turn signals with LEDs on front and rear
• Maximum 120W

CUSTOM DYNAMICS Magicflex Sportster LED Engine Kit, White, 5-pack, Strip, Adhesive Back, Engine, Flexible Strips, Accent Light

• 48" color-coded wire in high-temp protective black sheathing
• Attaches with pre-attached 3M adhesive tape
• High-output surface-mount single-function LEDs
• 120 viewing angle
• 100% waterproof

NOTE: Cruiser kit includes two 24-LED 12" strips, three 6-LED 3" strips, three mounting blocks and complete wiring listed above.

CUSTOM DYNAMICS Red Replacement Signal Lenses, Turn Signal, Pair, specific application, Replacement Lens

• Replace stock signal lenses
• Available in red and smoke
• Sold in pairs

CUSTOM DYNAMICS Smoke Replacement Signal Lenses, Turn Signal, Pair, specific application, Replacement Lens

• Replace stock signal lenses
• Available in red and smoke
• Sold in pairs