Drag Specialties

84 products

84 products

JIMS Hollow Axle Plug Tool, made in the usa, specific application, Alignment, Harley 08-15 FX 12-15 FL 08 - 15 XL
Jims
$221.95
Sold Out
JIMS Front Fork Compressor Tool, made in the usa
Jims
$622.95
JIMS Tappet Position Holding Tool, made in the usa, specific application
Jims
$88.95
Sold Out
JIMS 5-Speed Main Case Seal Installer Tool, made in the usa, specific application
Jims
$98.95
JIMS Clutch Assembly Service Tool, Black, Blue, made in the usa, Each, specific application, Harley 85-06 FX 90-06 FL 90 - 94 XL
Jims
$571.95
JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL
Jims
$102.95
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)
Jims
$43.95
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer
Jims
$37.95
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL
Jims
$120.95
JIMS Professional Fuel Injection Pressure Test Tool, made in the usa, specific application, Harley 01-15 FX 01-15 FL 07 - 15 XL
Jims
$638.95
JIMS Interconnect Seal Leak Testing Tool, Balancer Tension Plate, Blue, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
Jims
$69.95
JIMS Timken Case Bearing Tool, Black, Harley 03-10 FX 03-10 FL
Jims
$1,658.95
Sold Out
JIMS Piston Ring End Gap Tool Standard Pistons 3.875" Or 4" Bore, For H-D 95"/103"/110" Motors.
Jims
$94.95
Sold Out
JIMS TOOL IGN LOCK 06-15 FXD, Ignition Switch
Jims
$79.95
JIMS ForceFlow Cylinder Head Cooler Black, Harley 99-15 FLH, FLT
Jims
$630.95
Sold Out
JIMS Black Flow Pro 1 Billet Oil Pump Body, Harley 92-00 FX 92-99 FL 92 - 94 XL
Jims
$598.95
Sold Out
JIMS Black Flow Pro 1 Billet Oil Pump Body, Harley 73-91 FX 73-91 FL 87 - 91 XL
Jims
$598.95
JIMS Black Flow Pro 1 Complete Billet Oil Pump Assembly, Aluminum, Harley 92-00 FX 92-99 FL 92 - 94 XL
Jims
$820.95
JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL
Jims
$153.95
JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$193.95
JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL
Jims
$157.95
JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$200.95
JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$193.95
JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$186.95
Sold Out
JIMS ForceFlow Cylinder Head Cooler Adapter Mount For 110" Motors, Hardware
Jims
$62.95
JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 91-05 FX 91-05 FL
Jims
$363.95
JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 90-06 FL
Jims
$381.95
JIMS Transmission Rebuild Kit, Jims 1056, Sold Each, Harley 07-16
Jims
$659.95
JIMS Transmission Rebuild Kit, Jims 1068, Sold Each, Harley Softails 07-16
Jims
$623.95
JIMS Transmission Rebuild Kit, Harley 06-16 FX 12-16 FL
Jims
$659.95
JIMS Transmission Rebuild Kit, Each, Harley 99-06 FX 99-06 FL
Jims
$440.95
JIMS 5-Speed Transmission Fifth Gear Mainshaft, With Bearings And Seal., Harley 91-95 FX 90-95 FL 91 - 94 XL
Jims
$445.95
JIMS Primary Bearing Upgrade, Each, specific application, Harley 90-06 FX 90-07 FL 90 - 94 XL
Jims
$53.95
Sold Out
JIMS Tappet Pump And Test Stand, Hydraulic, Harley 99-15 FX 99-15 FL
Jims
$402.95
JIMS Replacement Drive For Cam Bearing Installation Tool PART #3801-0160, Harley 99-15 FX 99-15 FL
Jims
$106.95
JIMS Hollow Axle Plug Tool, made in the usa, specific application, Alignment, Harley 08-15 FX 12-15 FL 08 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Hollow Axle Plug Tool, made in the usa, specific application, Alignment, Harley 08-15 FX 12-15 FL 08 - 15 XL

DS-38050072

$221.95

In Stock

Save $-221.95
/
Shipping calculated at checkout.
JIMS Hollow Axle Plug Tool, made in the usa, specific application, Alignment, Harley 08-15 FX 12-15 FL 08 - 15 XL
  • Helps establish a centerpoint during alignment
  • Plug into left and right ends of axle
  • Includes two plugs
  • Made in the U.S.A.
JIMS Tappet Position Holding Tool, made in the usa, specific application Garage and Shop Jims - K and G Cycles
Jims

JIMS Tappet Position Holding Tool, made in the usa, specific application

DS-38010275

$88.95

In Stock

Save $-88.95
/
Shipping calculated at checkout.
JIMS Tappet Position Holding Tool, made in the usa, specific application
  • Safely stores anti-rotation pins and tappets for proper and accurate installation
  • Locations of the tappets are marked on the tool; preventing damage after being removed from the engine
  • Made in the U.S.A.
JIMS Clutch Assembly Service Tool, Black, Blue, made in the usa, Each, specific application, Harley 85-06 FX 90-06 FL 90 - 94 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Clutch Assembly Service Tool, Black, Blue, made in the usa, Each, specific application, Harley 85-06 FX 90-06 FL 90 - 94 XL

DS-38010095

$571.95

In Stock

Save $-571.95
/
Shipping calculated at checkout.
JIMS Clutch Assembly Service Tool, Black, Blue, made in the usa, Each, specific application, Harley 85-06 FX 90-06 FL 90 - 94 XL
  • Safely disassembles and assembles clutch shell assembly
  • Easily removes and installs clutch hub from its bearing
  • Safely removes and installs clutch shell ball bearing (OEM #37906-90) without any damage to new bearing by pushing on the outer perimeter of bearing
  • Made in the U.S.A.
JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL

DS-38010193

$102.95

In Stock

Save $-102.95
/
Shipping calculated at checkout.
JIMS Evo Adapter For Tappet Pump And Test Stand, Must be used in conjunction with PART #3801-0192, Harley 84-00 FX 84-99 FL 87 - 94 XL
  • Allow you to fill hydraulic tappets before assembling valve train
  • Helps diagnose loose or spongy tappets that could eventually lead to bleed-down issues or sticky tappets that won't pump up due to poor hydraulic unit fitment
  • Made in the U.S.A.
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042) Garage and Shop Jims - K and G Cycles
Jims

JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)

DS-38110039

$43.95

In Stock

Save $-43.95
/
Shipping calculated at checkout.
JIMS 25mm Wheel Bearing Installer Adapter For PART #DS-196295 (Jim's PART #1042)
  • Updates discontinued PART #DS-196295 (Jim's #1042) for use with 25mm wheel bearing found on 07-15 models
  • Made in the U.S.A.
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer Garage and Shop Jims - K and G Cycles
Jims

JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer

DS-38010171

$37.95

In Stock

Save $-37.95
/
Shipping calculated at checkout.
JIMS Adapter For 7mm Valve Guide Insert For Valve Guide Remover/Installer
  • Use for removing and installing valve guides
  • Adapters are supported by a stand that makes it easy to press valve guides in and out
  • A special guide alignment shaft holds the right angle for best possible guide installation
  • Save time and money on seat grinding by installing the guides in line with the valve seats
  • Kit includes base assembly, six adapters, three assembly pilots, three inserts and instructions
  • Adapters for working on 7mm valve guides available separately
  • Made in the U.S.A.
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL

DS-38010097

$120.95

In Stock

Save $-120.95
/
Shipping calculated at checkout.
JIMS Adapter For Sprocket Shaft Bearing/Race/Seal Installation Tool, Harley 06-15 FX 07-15 FL
  • Used on 84-02 Big Twin to install the flywheel assembly to the left crankcase Timken bearing
  • Made in the U.S.A.
JIMS Professional Fuel Injection Pressure Test Tool, made in the usa, specific application, Harley 01-15 FX 01-15 FL 07 - 15 XL Garage and Shop Jims - K and G Cycles
Jims

JIMS Professional Fuel Injection Pressure Test Tool, made in the usa, specific application, Harley 01-15 FX 01-15 FL 07 - 15 XL

DS-38040007

$638.95

In Stock

Save $-638.95
/
Shipping calculated at checkout.
JIMS Professional Fuel Injection Pressure Test Tool, made in the usa, specific application, Harley 01-15 FX 01-15 FL 07 - 15 XL
  • Necessary diagnostic tool for all Delphi injected models
  • Can be installed in line with the motorcycle's fuel supply system
  • Accurately diagnose causes of stalling, poor fuel economy, loss of power, hesitation, fuel pump-related problems inside the tank and more
  • Fuel pressure test can be easily performed in about the time it takes to change a set of spark plugs
  • Includes all necessary parts to diagnose Delphi fuel injection; see chart below for included parts
  • Can be used for road tests and during Dyno diagnostics/tuning
  • Made in the U.S.A.
JIMS Interconnect Seal Leak Testing Tool, Balancer Tension Plate, Blue, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Interconnect Seal Leak Testing Tool, Balancer Tension Plate, Blue, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL

DS-38010178

$69.95

In Stock

Save $-69.95
/
Shipping calculated at checkout.
JIMS Interconnect Seal Leak Testing Tool, Balancer Tension Plate, Blue, made in the usa, Each, specific application, Harley 00-15 FX 00-15 FL
  • Checks sealing of interconnect seal H-D No.45359-00
  • Seal is required to seal the oil passage way from right case to the balancer tensioner plate; leaking can cause over oiling of the lower end that decreases horsepower from oil drag
  • Can also be used to check pressure lost at the balancer tensioner plate
  • Made in the U.S.A.
JIMS Timken Case Bearing Tool, Black, Harley 03-10 FX 03-10 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Timken Case Bearing Tool, Black, Harley 03-10 FX 03-10 FL

DS-38010084

$1,658.95

In Stock

Save $-1,658.95
/
Shipping calculated at checkout.
JIMS Timken Case Bearing Tool, Black, Harley 03-10 FX 03-10 FL
  • This tool is a must for the big-cubic-inch late-model Twin Cam engine builder
  • It may also be used to replace bearings for stock 88" or 96" engines utilizing the special JIMS precision insert
  • Easily and accurately converts the left side crankshaft roller bearing (OEM #24604-00D) to the more durable Timken Bearing (OEM #9028)
  • Sleeve is several times stronger than stock aluminum case material that standard bearings ride in
  • Included in kit is one new steel bearing insert sleeve (held to under .0002" total indicator reading), all necessary drill bits to drill oil feed and return holes, press plate that holds bearing sleeve insert in line with case bearing bore at time of installation, all necessary hardware and instructions
  • Requires normal hand tools, hand drill and two-ton press
  • Timken bearing not included; see PART #0924-0108
  • Replacement Timken sleeve kit available separately
  • Made in the U.S.A.
JIMS ForceFlow Cylinder Head Cooler Black, Harley 99-15 FL Harley Jims - K and G Cycles
Jims

JIMS ForceFlow Cylinder Head Cooler Black, Harley 99-15 FLH, FLT

DS-19010419

$630.95

In Stock

Save $-630.95
/
Shipping calculated at checkout.
JIMS ForceFlow Cylinder Head Cooler Black, Harley 99-16 FLH, FLT
  • The perfect solution for those hot running Twin Cam Touring bikes
  • The only cooling system made for Twin Cam Touring bikes that consistently reduces operating temperatures up to 100 degrees
  • High-tech, waterproof cooling fan pushes air around cylinders and cylinder heads
  • Included temperature switch automatically turns the Force Flow on at 140 degrees
  • At higher speeds air is directed in through side scoop and around cylinder head and cylinder
  • Includes built-in quality OEM-type replacement horn
  • Easy plug and play installation with no drilling
  • Includes Force Flow assembly with high-powered fan, horn, temperature switch, manual override switch, wiring, hardware and complete instructions
  • 110" motors require optional adapter mount (available separately)
  • Made in the U.S.A.
JIMS Black Flow Pro 1 Complete Billet Oil Pump Assembly, Aluminum, Harley 92-00 FX 92-99 FL 92 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS Black Flow Pro 1 Complete Billet Oil Pump Assembly, Aluminum, Harley 92-00 FX 92-99 FL 92 - 94 XL

DS-09320009

$820.95

In Stock

Save $-820.95
/
Shipping calculated at checkout.
JIMS Black Flow Pro 1 Complete Billet Oil Pump Assembly, Aluminum, Harley 92-00 FX 92-99 FL 92 - 94 XL
  • Your choice of polished billet or OEM-style black wrinkle finished 6061 aluminum construction
  • CNC-machined feed and return gears increase pump flow and return volume
  • Pumps include cover, gears, drive shaft, seals, gaskets, woodruff keys, snap-rings and mounting bolts
  • Oil pumps do not have provisions for primary chain or drive chain oiling
  • Made in the U.S.A.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290043

$153.95

In Stock

Save $-153.95
/
Shipping calculated at checkout.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL
  • The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290046

$193.95

In Stock

Save $-193.95
/
Shipping calculated at checkout.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290044

$157.95

In Stock

Save $-157.95
/
Shipping calculated at checkout.
JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL
  • The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290023

$200.95

In Stock

Save $-200.95
/
Shipping calculated at checkout.
JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290014

$193.95

In Stock

Save $-193.95
/
Shipping calculated at checkout.
JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290015

$186.95

In Stock

Save $-186.95
/
Shipping calculated at checkout.
JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 91-05 FX 91-05 FL Harley Jims - K and G Cycles
Jims

JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 91-05 FX 91-05 FL

DS-11040010

$363.95

In Stock

Save $-363.95
/
Shipping calculated at checkout.
JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 91-05 FX 91-05 FL
  • Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 4-, 5-, or 6-speed transmission
  • 4-speed rebuild kit also includes a shift shaft and crankshaft, but does not include bearings
  • Made in the U.S.A.
JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 90-06 FL Harley Jims - K and G Cycles
Jims

JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 90-06 FL

DS-11040008

$381.95

In Stock

Save $-381.95
/
Shipping calculated at checkout.
JIMS 6-Speed Screamin' Eagle Transmission Rebuild Kit, Harley 90-06 FL
  • Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 4-, 5-, or 6-speed transmission
  • 4-speed rebuild kit also includes a shift shaft and crankshaft, but does not include bearings
  • Made in the U.S.A.
JIMS Transmission Rebuild Kit, Harley 07-16 FL Harley Jims - K and G Cycles
Jims

JIMS Transmission Rebuild Kit, Jims 1056, Sold Each, Harley 07-16

DS-11040005

$659.95

In Stock

Save $-659.95
/
Shipping calculated at checkout.
JIMS Transmission Rebuild Kit, Harley 07-16 FL
  • Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 4-, 5-, or 6-speed transmission
  • 4-speed rebuild kit also includes a shift shaft and crankshaft, but does not include bearings
  • Made in the U.S.A.
2015-2016 Harley-Davidson Electra Glide Ultra Limited Low FLHTKL
2015-2016 Harley-Davidson Road Glide Special FLTRXS
2015-2016 Harley-Davidson Electra Glide Ultra Classic Low FLHTCUL
2015-2016 Harley-Davidson Freewheeler FLRT
2014-2016 Harley-Davidson Street Glide Special FLHXS
2011-2013, 2016 Harley-Davidson Road Glide Ultra FLTRU
2010-2016 Harley-Davidson Electra Glide Ultra Limited FLHTK
2010-2013, 2015-2016 Harley-Davidson Road Glide Custom FLTRX
2010-2011 Harley-Davidson Street Glide Trike FLHXXX
2009-2016 Harley-Davidson Tri Glide Ultra Classic FLHTCUTG
2007-2016 Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI
2007-2016 Harley-Davidson Street Glide EFI FLHX
2007-2016 Harley-Davidson Road King EFI FLHR
2007-2013 Harley-Davidson Road King Classic EFI FLHRC
2007-2013 Harley-Davidson Electra Glide Classic EFI FLHTCI
2007-2009 Harley-Davidson Road Glide EFI FLTR
2007-2009 Harley-Davidson Electra Glide Standard EFI FLHTI
2007 Harley-Davidson Road King Custom EFI FLHRS
JIMS Transmission Rebuild Kit, Each, Harley 07-16 FX 07-16 FL Harley Jims - K and G Cycles
Jims

JIMS Transmission Rebuild Kit, Jims 1068, Sold Each, Harley Softails 07-16

DS-11040007

$623.95

In Stock

Save $-623.95
/
Shipping calculated at checkout.
JIMS Transmission Rebuild Kit, Each, Harley Softails 07-16
  • Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 4-, 5-, or 6-speed transmission
  • 4-speed rebuild kit also includes a shift shaft and crankshaft, but does not include bearings
  • Made in the U.S.A.
2016-2017 Harley-Davidson Fat Boy S FLSTFBS
2016-2017 Harley-Davidson Softail Slim S FLSS
2013-2017 Harley-Davidson Breakout FXSB
2012-2017 Harley-Davidson Softail Slim FLS
2011-2013 Harley-Davidson Blackline FXS
2010-2016 Harley-Davidson Fat Boy Lo FLSTFB
2008-2011 Harley-Davidson Softail Cross Bones FLSTSB
2008-2009 Harley-Davidson Softail Rocker FXCW
2007-2017 Harley-Davidson Softail Fat Boy EFI FLSTFI
2007-2017 Harley-Davidson Softail Heritage Classic EFI FLSTCI
2007-2017 Harley-Davidson Softail Deluxe EFI FLSTNI
2007-2010 Harley-Davidson Softail Custom EFI FXSTC
2007-2009 Harley-Davidson Softail Night Train EFI FXSTBI
2007 Harley-Davidson Softail Springer Classic EFI FLSTSCI
2007 Harley-Davidson Softail Deuce EFI FXSTDI
2007 Harley-Davidson Softail Standard EFI FXSTI
JIMS Transmission Rebuild Kit, Harley 06-16 FX 12-16 FL Harley Jims - K and G Cycles
Jims

JIMS Transmission Rebuild Kit, Harley 06-16 FX 12-16 FL

DS-11040006

$659.95

In Stock

Save $-659.95
/
Shipping calculated at checkout.
JIMS Transmission Rebuild Kit, Harley 06-16 FX 12-16 FL
  • Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 4-, 5-, or 6-speed transmission
  • 4-speed rebuild kit also includes a shift shaft and crankshaft, but does not include bearings
  • Made in the U.S.A.
JIMS Transmission Rebuild Kit, Each, Harley 99-06 FX 99-06 FL Harley Jims - K and G Cycles
Jims

JIMS Transmission Rebuild Kit, Each, Harley 99-06 FX 99-06 FL

DS-11040004

$440.95

In Stock

Save $-440.95
/
Shipping calculated at checkout.
JIMS Transmission Rebuild Kit, Each, Harley 99-06 FX 99-06 FL
  • Includes all the necessary gaskets, seals, locks and bearings needed to completely rebuild a 4-, 5-, or 6-speed transmission
  • 4-speed rebuild kit also includes a shift shaft and crankshaft, but does not include bearings
  • Made in the U.S.A.
JIMS 5-Speed Transmission Fifth Gear Mainshaft, With Bearings And Seal., Harley 91-95 FX 90-95 FL 91 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS 5-Speed Transmission Fifth Gear Mainshaft, With Bearings And Seal., Harley 91-95 FX 90-95 FL 91 - 94 XL

DS-11060036

$445.95

In Stock

Save $-445.95
/
Shipping calculated at checkout.
JIMS 5-Speed Transmission Fifth Gear Mainshaft, With Bearings And Seal., Harley 91-95 FX 90-95 FL 91 - 94 XL
  • Sold individually unless noted
JIMS Primary Bearing Upgrade, Each, specific application, Harley 90-06 FX 90-07 FL 90 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS Primary Bearing Upgrade, Each, specific application, Harley 90-06 FX 90-07 FL 90 - 94 XL

DS-11200242

$53.95

In Stock

Save $-53.95
/
Shipping calculated at checkout.
JIMS Primary Bearing Upgrade, Each, specific application, Harley 90-06 FX 90-07 FL 90 - 94 XL
  • Double row ball bearing with seal and retaining ring kit
  • Perfect for an open primary system or for added durability in a high-output system
JIMS Replacement Drive For Cam Bearing Installation Tool PART #3801-0160, Harley 99-15 FX 99-15 FL Garage and Shop Jims - K and G Cycles
Jims

JIMS Replacement Drive For Cam Bearing Installation Tool PART #3801-0160, Harley 99-15 FX 99-15 FL

DS-38010161

$106.95

In Stock

Save $-106.95
/
Shipping calculated at checkout.
JIMS Replacement Drive For Cam Bearing Installation Tool PART #3801-0160, Harley 99-15 FX 99-15 FL
  • Use to install the two inner cam bearings
  • Designed to press from the letter side of the inner cam bearing to eliminate any damage to the bearings, cam or case
  • Will set bearings .023"-.028" below case surface
  • Made in the U.S.A.