Drag Specialties

14 products

14 products

JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL
Jims
$153.95
JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$193.95
JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL
Jims
$157.95
JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$200.95
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL
Feuling Oil Pump Corp.
$299.95
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 84-00 FX 84-99 FL 86 - 94 XL
Feuling Oil Pump Corp.
$279.95
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.0015", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Feuling Oil Pump Corp.
$299.95
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 91 - 03 XL Buell 94-99
Feuling Oil Pump Corp.
$239.95
JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$193.95
JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Jims
$186.95
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Feuling Oil Pump Corp.
$299.95
S&S CYCLE Hydraulic Tappets, 4-Pack, specific application, Harley 84-00 FX 84-99 FL 86 - 94 XL
S&S Cycle
$381.95
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Exhaust, Intake, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Feuling Oil Pump Corp.
$199.95
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.001", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
Feuling Oil Pump Corp.
$299.95
JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290043

$153.95

In Stock

Save $-153.95
/
Shipping calculated at checkout.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL
  • The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290046

$193.95

In Stock

Save $-193.95
/
Shipping calculated at checkout.
JIMS Powerglide Steady Roll Tappet, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL Harley Jims - K and G Cycles
Jims

JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290044

$157.95

In Stock

Save $-157.95
/
Shipping calculated at checkout.
JIMS Powerglide Steady Roll Tappet, size +.002", Harley 84-00 FX 84-99 FL 86 - 94 XL
  • The same Powerglide advantage (oil-fed axle, billet steel body, precision fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290023

$200.95

In Stock

Save $-200.95
/
Shipping calculated at checkout.
JIMS Powerglide II Hydraulic Tappets, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290022

$299.95

In Stock

Save $-299.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters Standard, Harley 84-00 FX 84-99 FL 86 - 94 XL
  • Full-travel hydraulic lifters made from machined steel
  • Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
  • Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
  • Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
  • Available in oversize diameters
  • Recommended for both strip and performance street engines
  • Sold in a set of four
  • Made in the U.S.A.
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 84-00 FX 84-99 FL 86 - 94 XL Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290018

$279.95

In Stock

Save $-279.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 84-00 FX 84-99 FL 86 - 94 XL
  • Performance hydraulic roller lifters dyno developed and track tested
  • CNC-machined and precision ground
  • When used with Feuling oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides
  • Extend life of top end valve gear
  • Can also be used for OEM replacements
  • Sold in a set of four
  • Made in the U.S.A.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.0015", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.0015", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290009

$299.95

In Stock

Save $-299.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.0015", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • Full-travel hydraulic lifters made from machined steel
  • Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
  • Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
  • Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
  • Available in oversize diameters
  • Recommended for both strip and performance street engines
  • Sold in a set of four
  • Made in the U.S.A.
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 91 - 03 XL Buell 94-99 Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 91 - 03 XL Buell 94-99

DS-09290017

$239.95

In Stock

Save $-239.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Harley 91 - 03 XL Buell 94-99
  • Performance hydraulic roller lifters dyno developed and track tested
  • CNC-machined and precision ground
  • When used with Feuling oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides
  • Extend life of top end valve gear
  • Can also be used for OEM replacements
  • Sold in a set of four
  • Made in the U.S.A.
JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290014

$193.95

In Stock

Save $-193.95
/
Shipping calculated at checkout.
JIMS Powerglide II Hydraulic Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Jims - K and G Cycles
Jims

JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290015

$186.95

In Stock

Save $-186.95
/
Shipping calculated at checkout.
JIMS Hydrosolid Tappets, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities
  • Billet body
  • Increased roller width
  • Roller perpendicularity held to .0002"
  • Hand-honed hydraulic unit cavity
  • Dynamic load capacities increased over 30%
  • Lubrication capacities for hydraulic unit and valve train (top end) increased 10%
  • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling
  • Sold each
  • Made in the U.S.A.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290007

$299.95

In Stock

Save $-299.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, Standard, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • Full-travel hydraulic lifters made from machined steel
  • Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
  • Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
  • Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
  • Available in oversize diameters
  • Recommended for both strip and performance street engines
  • Sold in a set of four
  • Made in the U.S.A.
S&S CYCLE Hydraulic Tappets, 4-Pack, specific application, Harley 84-00 FX 84-99 FL 86 - 94 XL Harley S&S Cycle - K and G Cycles
S&S Cycle

S&S CYCLE Hydraulic Tappets, 4-Pack, specific application, Harley 84-00 FX 84-99 FL 86 - 94 XL

DS-09290004

$381.95

In Stock

Save $-381.95
/
Shipping calculated at checkout.
S&S CYCLE Hydraulic Tappets, 4-Pack, specific application, Harley 84-00 FX 84-99 FL 86 - 94 XL
  • Rollers have a larger-than-stock inner bearing race that reduces stress and increases axle life
  • Each lifter body and plunger assembly is hand-fit and pressure-tested to ensure correct operation
  • Redesigned plunger assembly withstands forces associated with heavy-duty valve springs and pushrods typically used in high-performance applications
  • Revised metering device precisely controls oil delivery to top end, ensuring rapid lifter pump-up and reducing possibility of oil starvation to bottom end
  • Sold in set of four
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Exhaust, Intake, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Exhaust, Intake, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290005

$199.95

In Stock

Save $-199.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. HP+ Hydraulic Lifters, Exhaust, Intake, Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • Performance hydraulic roller lifters dyno developed and track tested
  • CNC-machined and precision ground
  • When used with Feuling oil pump, they will increase critical oil flow to valves, springs, rockers, shafts and valve guides
  • Extend life of top end valve gear
  • Can also be used for OEM replacements
  • Sold in a set of four
  • Made in the U.S.A.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.001", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09 Harley Feuling Oil Pump Corp. - K and G Cycles
Feuling Oil Pump Corp.

FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.001", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09

DS-09290008

$299.95

In Stock

Save $-299.95
/
Shipping calculated at checkout.
FEULING OIL PUMP CORP. Race Series Hydraulic Lifters, size +0.001", Harley 98-16 FX 99-16 FL 86 - 16 XL Buell 00-09
  • Full-travel hydraulic lifters made from machined steel
  • Exceed the needs of large-lift camshafts and higher spring pressures with a slower bleed-down rate
  • Maintain proper and critical oil flow to valves, springs, rockers, shafts and valve guides
  • Increase engine RPM and valvetrain stability; decreases valve float for maximum valve lift
  • Available in oversize diameters
  • Recommended for both strip and performance street engines
  • Sold in a set of four
  • Made in the U.S.A.