Emgo

EMGO AIR FILTER KAW 11013-1122, Paper, specific application

• Meet or exceed OEM-quality standards
• Built with the highest-quality paper, rubber and metal

EMGO Lucas 6V Universal Ignition Coil, Single output, Each, External Ignition Coil

• Single and dual spark plug leads using solid core wire
• PART #2102-0029 uses mounting bracket for ground; mounting holes are 5.5mm X 32mm center to center
• PART #2102-0030 has fully insulated mount
• Check wiring diagram before installing

EMGO AIR FILTER 13780-38A00, Paper, specific application

• Meet or exceed OEM-quality standards
• Built with the highest-quality paper, rubber and metal

EMGO AIR FILTER 13780-38A50, Paper, specific application

• Meet or exceed OEM-quality standards
• Built with the highest-quality paper, rubber and metal

EMGO Oil Filter, Paper, specific application, Replacement
EMGO Oil Filter, Paper, specific application, Replacement, Ural 80-15

EMGO Chrome Mirror Adapter With 10mm Male Thread and 8mm Female Thread, Each, specific application

• Reduce or increase thread size to allow mounting on 8mm or 10mm applications
• Convert left-hand threaded applications to right-hand threaded mirrors
• Mirror risers raise mirror approximately 1"
• Available with black or chrome finish
• Sold each

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Travel Trunk, Black, lockable, Plastic, Tail Bag

• Constructed of durable black ABS plastic
• Designed to mount on most luggage racks
• Includes mounting hardware, lock and two keys
• Measures 12" L x 161/2" W x 11" D

EMGO Lil Cruiser Mirror, Natural, Chrome, glass height 3", Oval, glass width 5", Aluminum, Each, stem size 4 1/2", Short

• Great-looking, short-stemmed, chrome-plated mirrors designed with cruisers in mind
• Available with standard or reverse 10mm thread
• Standard 10mm thread fits either side of most bikes, except Yamaha; reverse 10mm thread fits Yamaha right side
• Sold each

EMGO Bates-Style 4, size 4 1/2", Lamp, Spotlight

• Popular custom bottom mount spotlamp of years past
• Includes blue indicator jewel on top of shell
• Complete unit with sealed beam 4 1/2" bulb and 16" external wiring leads
• Sold each

EMGO Chrome 5 3/4" Lucas-Style Side-Mount Headlight Shells, Headlight Housing

• Scaled down version of the Lucas styled 7" headlight shells
• Available in chrome and gloss black shell with chrome rim
• Complete with a bottom hole in rear of shell for wiring routing
• Has copper ground spade secured to inside of shell as well as wire loom retainers
• Will accept most 5 3/4" sealed beam headlights and LED head lights
• Uses 5/16-24 mounting bolts (not included)
• Includes headlight shell and rim

EMGO Custom Shorty Shocks, Black, Chrome, length 11.4", Pair

• Easily lower your bike simply by installing these shocks
• Available in several mounting configurations and finishes
• Measure 11.4" (298mm) in length from eye to eye or eye to clevis
• Shocks have a 5-position preload adjustment
• Clevis mounting is 10mm x 1.25 thread with a 22mm wide i.d.
• Sold as a pair

EMGO 6" Chrome Stamped Mirror, Round, glass width 3", mounting diameter 7/8" - 1", Each, specific application, Handlebar Mount, Side Mirror

• Stamped chrome back with 3" mirror provides timeless look
• Fully adjustable for left or right sides
• Clamp-style mirrors will clamp on 7/8" or 1" diameter handlebars with included hardware
• Sold each

NOTE: PART #0640-1015 requires adapter PART #DS-302020 or 0641-0109 to be used on metric motorcycle (sold separately).

EMGO 1" Chrome Single Cable Throttle Assembly, Throttle Assembly/Kit

• Complete throttle assemblies with throttle tube
• Available with throttle tension adjuster to aid in those cold morning start-ups
• Chrome or durable painted black finishes; single or dual throttle

EMGO 31mm Lever Pivot Bolts, Silver, Each

• Replace commonly worn or lost pivot bolts for brake or clutch levers
• Include correctly-sized nut
• Use size chart to determine correct bolt for application
• All measurements in millimeters
• Sold each

EMGO Reverse Cone Dunstall Style Replica Muffler, 4-Stroke, Long, length 27 3/4", Steel, Slip-on, Exhaust

• Period correct tribute to performance exhausts of the era
• Complete with inlet clamp, sliding bracket and sleeves for easy fitment
• 15/8" i.d. without reducers
• Sleeves are supplied to reduce i.d. to 11/2" or 13/8"
• Available in long wide-mouth outlet and long reverse cone
• Sold each

EMGO Wide-Mouth Outlet Dunstall Style Replica Muffler, 4-Stroke, Long, length 27 1/4", Steel, Slip-on

• Period correct tribute to performance exhausts of the era
• Complete with inlet clamp, sliding bracket and sleeves for easy fitment
• 15/8" i.d. without reducers
• Sleeves are supplied to reduce i.d. to 11/2" or 13/8"
• Available in long wide-mouth outlet and long reverse cone
• Sold each

EMGO Megaphone Muffler, 4-Stroke, length 26", Steel, Slip-on

• 26" Universal muffler
• Comes with multi reducer set
• Fits 13/4", 13/8", 11/2" and 15/8" pipes
• Available in standard and wide-mouth megaphone styles
• Sold each

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO Ignition Switch, Each, specific application

• Direct OEM replacement
• Two keys included

EMGO IGNITION SWITCH, Ignition Switch Repair Kit

• Replaces worn-out switch bases that can cause electrical problems
• Easy to replace; includes switch base and cover
• Fits OEM #s 35100-431-047 and Emgo PART #40-15830 ignition switches

EMGO Stator HONDA CB

• Quality OE-style replacement stator
• Replaces Honda OE # 31102-333-004
• Sold each

EMGO Rectifier, Each, specific application

• Direct plug-in OEM replacement
• Replaces Honda OEM# 31600-MV4-000 and 31600-MV4-010

EMGO SOLENOID STARTER HONDA

• Replacement OE style replacement starter solenoid
• Equivalent to Honda OE # 35850-MR5-007
• Sold each

EMGO Handlebar Switch Housing, Black, Plastic, Each, specific application, Ignition Switch, wiring included

• Replaces commonly broken switch housing (OE# 21T-83973-00-00)
• Correct length harness and ends for plug-and-play installation
• Works well in custom applications
• Sold each

EMGO Left side Handlebar Switch Assemblies With Built-in Clutch Perch and Mirror Mount, Black, Plastic, Each, specific application, Clutch Switch, wiring included

• Faithful reproductions of the left and right handlebar switch housing for Honda CB550 and CB750F/K models
• Used also as universal handlebar switches because of their durability and ease of use
• Includes harness with color codes and pre-installed bullet connectors
• Sold each