Motion Pro

MOTION PRO Bulk Cable Housing, Black, Each

• 100' bulk steel cable wire for custom cable fabrication

CABLE HOUSING

• 50' L
• Bulk cable housing for custom cable fabrication

MOTION PRO Bulk Cable Wire, Steel, Each, 2.5mm (.100")

• 100' bulk steel cable wire for custom cable fabrication

CABLE HOUSING

• 50' L
• Bulk cable housing for custom cable fabrication

MOTION PRO Mini Chain Press Tool

• Fits most #520-#530 standard and O-ring chains
• Compact fanny pack size
• Hex key wrench is included with tool
• Made in the U.S.A.

MOTION PRO 3/16" In-Line Fuel Valve

• For use with auxiliary fuel tank or other use requiring an in-line installation
• Feature double neoprene seals and O-rings
• Smooth and positive operation
• PART #P537 is not recommended for engines over 200cc
• PART #s P12-035 and P12-036 are not recommended for engines over 300cc

MOTION PRO Main Jet 6mm Hex Wrench

• High-quality die-cast construction
• Available for round and hex jets
• Cap compartment will hold a few spare jets
• Skin-packaged one per card

MOTION PRO Shock Wrench, Steel, Shock Spanner

• Heat-treated alloy steel
• Fits Honda MX models and ATC200/250R/350X
• Will fit 68 and 87mm spanner rings

MOTION PRO Valve Shim Tool, Steel, Kawasaki 76-02

• For adjusting valve clearance on twin cam models
• Hold valve spring bucket down so adjusting shims can be removed
• Manufactured of hardened alloy steel

MOTION PRO Valve Shim Tool, Steel, Yamaha

• For adjusting valve clearance on twin cam models
• Hold valve spring bucket down so adjusting shims can be removed
• Manufactured of hardened alloy steel

MOTION PRO Mag/Flywheel Pullers, Black, Steel, Each, Honda 66-78, Kawasaki 74-03, Yamaha 86-90

• Heat-treated steel
• See application chart below

MOTION PRO Mag/Flywheel Puller, Black, Steel, Each, Honda 69-07, Kawasaki 74-01, Suzuki 65-06, Yamaha 76-03

• Heat-treated steel
• See application chart below

MOTION PRO Syncpro Carburetor Tuner 6mm Brass Adapters, Carb Adapters

• Precise four-channel vacuum indicator designed specifically for intake synchronization of engines with multiple carburetors or throttle bodies
• Mercury-free design
• For use with any two-, three- or four-cylinder 4-stroke engines
• Spill-proof design means the tool can be stored in a horizontal or vertical position
• Easy-to-read scale for precise synchronization
• Unaffected by barometric pressure changes
• Includes hang hook to clip onto the handlebars for easy use
• Rugged, impact-resistant ABS enclosure with convenient storage area for adapters, etc.
• Rubber feet on enclosure bottom help prevent sliding
• Includes manometer fluid, hoses, 5mm adapters, in-line restrictors and instructions
• 5mm adapters are used on many Honda and Suzuki models
• Optional 6mm adapters are available for use on most Yamaha models
• Most Kawasaki models do not need adapters
• Patent pending

MOTION PRO Syncpro Carburetor Tuner 5mm Brass Adapters, Carb Adapters

• Precise four-channel vacuum indicator designed specifically for intake synchronization of engines with multiple carburetors or throttle bodies
• Mercury-free design
• For use with any two-, three- or four-cylinder 4-stroke engines
• Spill-proof design means the tool can be stored in a horizontal or vertical position
• Easy-to-read scale for precise synchronization
• Unaffected by barometric pressure changes
• Includes hang hook to clip onto the handlebars for easy use
• Rugged, impact-resistant ABS enclosure with convenient storage area for adapters, etc.
• Rubber feet on enclosure bottom help prevent sliding
• Includes manometer fluid, hoses, 5mm adapters, in-line restrictors and instructions
• 5mm adapters are used on many Honda and Suzuki models
• Optional 6mm adapters are available for use on most Yamaha models
• Most Kawasaki models do not need adapters
• Patent pending

MOTION PRO Oil Filter and Clutch Hub Spanner, Steel, Oil Filter/Clutch Hub

• Made of heat-treated steel
• Use with a 3/8" driver
• Inside diameter is 24mm
• Designed to fit oil filter and clutch hub on many Honda models (single- and twin-cylinder machines)
• Fits most pre-78 CB, CL, CT, SL and XL models, XR200 80-84, XR200R 81-94, XR250L 91-94, XR250R 86-94 and GL1000 75-77

MOTION PRO 5/16" Dual Valve Fuel Line Quick-Disconnect Coupling, Dual Shut-off Valve 5/16", Fuel Line Couplings

• Single or dual shut-off valves
• When connected fuel will flow and when disconnected fuel will not flow
• Use dual shut-off for fuel tanks equipped with a crossover line
• For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve
• Available for 1/4" and 5/16" i.d. fuel line
• Capable of withstanding temperatures of -40 F to 180 F
• These quick-disconnect fittings utilize Nitrile (Buna N) O-rings and may not be compatible with some race fuels
• Made in the U.S.A.

MOTION PRO 1/4" In-Line Fuel Valve

• For use with auxiliary fuel tank or other use requiring an in-line installation
• Feature double neoprene seals and O-rings
• Smooth and positive operation
• PART #P537 is not recommended for engines over 200cc
• PART #s P12-035 and P12-036 are not recommended for engines over 300cc

MOTION PRO 1/4" Single Valve Fuel Line Quick-Disconnect Coupling, Single Shut-off Valve 1/4", Fuel Line Couplings

• Single or dual shut-off valves
• When connected fuel will flow and when disconnected fuel will not flow
• Use dual shut-off for fuel tanks equipped with a crossover line
• For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve
• Available for 1/4" and 5/16" i.d. fuel line
• Capable of withstanding temperatures of -40 F to 180 F
• These quick-disconnect fittings utilize Nitrile (Buna N) O-rings and may not be compatible with some race fuels
• Made in the U.S.A.

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 3/8"

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 5/16"

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 1/4"

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 3/16"

• Contains a wide selection of Y and T fittings, hose clamps, O-clips and O-clip front jaw pincher tool
• Sizes from 3/16"-3/8"
• Includes 40 assorted O-clips, 40 assorted Y-connectors, 40 assorted T-connectors, hose clamps
• Includes ABS storage case
• Replacements available in packs of 10 are listed below
• Ideal for the shop or home mechanic
• Made in the U.S.A.

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 5/16", Y-connector

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 1/4", Y-connector

• Sturdy plastic fittings are used to run two hoses into one
• May be used with hose clamps or O-clips
• Fuel resistant
• Sold in 10-pack

MOTION PRO Fuel Line Fittings Replacement Connectors, Motion Pro Fuel Line Fittings Kit, Each, style 3/16", Y-connector

• Contains a wide selection of Y and T fittings, hose clamps, O-clips and O-clip front jaw pincher tool
• Sizes from 3/16"-3/8"
• Includes 40 assorted O-clips, 40 assorted Y-connectors, 40 assorted T-connectors, hose clamps
• Includes ABS storage case
• Replacements available in packs of 10 are listed below
• Ideal for the shop or home mechanic
• Made in the U.S.A.

MOTION PRO 3/8" Drive T-Handle Driver, Steel, Each

• Use any 1/4" or 3/8" drive attachments such as sockets, hex drives, crow's foot or swivels
• Chrome-vanadium tool steel shafts
• Feature a durable hard nickel pewter finish

MOTION PRO 1/4" Drive T-Handle Driver, Steel, Each

• Use any 1/4" drive attachments such as sockets, hex drives, crow's foot or swivels
• Chrome-vanadium tool steel shafts
• Feature a durable hard nickel pewter finish

MOTION PRO T-Handle 19mm Socket, Chrome, Steel, Each

• Great for shop and home mechanics alike
• Feature chrome vanadium tool steel, deep six-point sockets and Phillips bits with carbon steel T-style handles
• Metric sockets sold individually in 8, 10, 12, 13, 14, 17 and 19mm sizes or in sets of six or seven in sizes listed
• Screwdrivers available with #1 Phillips bit
• Metric sockets and screwdrivers finished in nickel-pewter; standard socket set finished in polished chrome
• Deep sockets allow nuts to be driven over long threaded bolts
• Hex socket extends only part of the way inside, allowing the nut to be held in the socket
• Slim outside diameter allows sockets to fit in tight areas
• Storage rack available - one-piece design with chrome finish holds 11 T-handle tools; hooks to toolbox or tray
• Wall-mount bracket for one-piece storage rack features quick-release pin for removing and attaching and a built-in bottle opener; made from heavy-duty 12-gauge zinc-plated steel; made in the U.S.A.