32 products
32 products
32 products
V-Twin Manufacturing Universal Throttle Handle Ferule w/Nut XL
VT-36-2538
Regular price $5.86Features rugged aluminum alloy construction and provides more accurately regulated voltage under all electrical loads . Volt Tech regulator has chrome finish.
OEM: 74540-01
V-Twin Manufacturing Barnett Clear Coat Braided Stainless Throttle Cable Sets, 38 , 1996-up S&S
VT-36-0831
Regular price $95.03Ignition module adapter allows use of 7-pin module (1991- 1993) going to 8-pin Deutsch (1994-1999) wiring harness.
For special application on 1993-1993 FLT, FXD, FXST, FLST models. Adapter cannot be used on EFI models.
V-Twin Manufacturing Barnett Carb Conversion Throttle-Idle Cable, S&S Super B or Bendix,
VT-36-0723
Regular price $23.86Kit includes press on chrome switch caps for easy installation.
V-Twin Manufacturing Barnett Carb Conversion Throttle-Idle Cable, Dell'Orto Pumper, Stainless,
VT-36-0670
Regular price $27.15Housing kit includes left and right upper and lower housing. Housings are smooth style, stock chrome type.
Order switch and wiring separately.
V-Twin Manufacturing Barnett Mikuni HS 42-45, Black, 36 Throttle 1981-95
VT-36-2585
Regular price $41.983-phase kit includes stator, regulator, rotor, and hardware.
Kit offers an increase in charging power when upgrading from a 32 or 38 amp system. This 80 series kit produce 32 amps at 1000 RPMs and 50 amps at 2500 RPMs. For stock replacement.
OEM
V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Black, 41
VT-36-2545
Regular price $47.50Volt Tech regulator features rugged aluminum alloy construction and provides more accurately regulated voltage under all electrical loads. Volt Tech regulator has chrome finish.
OEM: 74523-04
V-Twin Manufacturing Barnett Mikuni HS40 degree Black, 41 Throttle 1981-95
VT-36-2543
Regular price $41.98Features solid state components in generator end cover. Black end cover has needle bearing installed for 12 volt generators.
V-Twin Manufacturing Black Throttle Cable with 39-1/4" Casing, 40mm Mikuni
VT-36-2541
Regular price $41.98Features solid state components in chrome generator end cover.
End cover has needle bearing installed and fits all 29975-65A 12 volt and 29975-61A generators.
V-Twin Manufacturing Barnett Mikuni Carb, 38 and 40mm, Black, 46 Throttle Unv., Single
VT-36-2494
Regular price $45.72Main wiring harness kit features plastic wire in original factory color codes, with all terminals applied in vinyl loom.
Handlebar and tail lamp wiring must be purchased separately. Main wiring harness includes the main turn signal wires.
OEM: 69
V-Twin Manufacturing Barnett Mikuni Carb, 38 and 40mm, Black, 38 Throttle Unv., Single
VT-36-2493
Regular price $41.98Main wiring harness features plastic covered wires and includes high tension wires.
Order tail lamp, handlebar and turn signal wires separately.
OEM: 70135-86
Tech Note:
Suggested to use with #48-
V-Twin Manufacturing Barnett Keihin, Black, 38 Throttle Unv., Single
VT-36-2477
Regular price $41.98Spark plug wire set is 8mm type.
Sold in a quantity of 2.
V-Twin Manufacturing Barnett black vinyl throttle cable has a 43.625" casing length and a 47.375" overall length
VT-36-2465
Regular price $55.08V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Stainless Clear
VT-36-1565
Regular price $79.18V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Stainless Clear
VT-36-1563
Regular price $79.18Alternator charging system kit includes rotor, stator, regulator and all hardware necessary for installation. Charging kit includes 35 tooth sprocket.
V-Twin Manufacturing Barnett Mikuni HS40 degree Stainless Clear Coat, 41 Throttle 1981-95
VT-36-1546
Regular price $49.8815 amp circuit breaker is self resetting.
OEM: 74587-94
V-Twin Manufacturing Barnett Mikuni Carb, 38 and 40mm, Stainless Clear Coat, 38 Throttle Unv.,
VT-36-1542
Regular price $49.88Oil pressure switch is precision calibrated and provide a warning when the oil pressure drops below the desired running pressure.
Features heavy duty contacts and mica filled thermoplastic insluators to withstand extreme temperatures and are designe
V-Twin Manufacturing Throttle Cable, Clear SS, 43.25" Casing, +8 Length 1990-1995 various
VT-36-1513
Regular price $81.26OE battery cable for positive terminal.
PVC plastic coated cable replaces original with heat shielded terminal ends.
OEM: 70083-89
Measurements:
Length: 11-3/4"
V-Twin Manufacturing Barnett Throttle Cable, Clear SS; 35" Casing, Stock 1990-1995 various
VT-36-1512
Regular price $79.92Battery cable measures 31-3/4" long for positive terminal on battery.
PVC plastic coated cable replaces original with heat shielded terminal ends.
OEM: 70033-89
Measurements:
Length: 31-3/4"
V-Twin Manufacturing Barnett Universal Throttle Cables by V-Twin, 411-2 Ball & Barrel Ends
VT-36-0905
Regular price $17.86Starter is 1.4kW and fully chrome plated including the aluminum parts.
V-Twin Manufacturing Barnett Clear Coat Braided Stainless Throttle Cable Sets, +8 , 1990-95
VT-36-0842
Regular price $104.49Accel performance tune up kit includes matched crown contact points, condenser, gap settings and point cam lube.
Replacement spark plugs are not included.
V-Twin Manufacturing Barnett Clear Coat Braided Stainless Throttle Cable Sets, 38 , 1981-95 S&S
VT-36-0830
Regular price $95.03Stud type neutral swtch is manufactured to ensure proper function and long life.
Features high carbon steel stems hardended to 48 Rockwell C for maximum r sistance and durability.
OEM: 33902-98
V-Twin Manufacturing XL1200 Barnett Clear Coat Braided Stainless Throttle Cable Set, 2002-up XL
VT-36-0827
Regular price $45.33Alternator rotor sprocket assembly features vibration proof magnet construction and includes a 34 tooth sprocket.
Magnets are held in place by a stainless steel non-magnetic insert for durability.
OEM: 32493-02A
V-Twin Manufacturing Black Throttle Cable with 38" Casing
VT-36-0744
Regular price $41.98Raw finish electric starter block off plate is used when starter assembly is removed.
OEM: 31460-70
V-Twin Manufacturing Barnett Qwiksilver, Black, 39 Throttle 1996-up
VT-36-0740
Regular price $25.33V-Twin Manufacturing Barnett S&S Super E & G and Screamin Eagle, Black, 41.5
VT-36-0732
Regular price $41.98Battery tray insert is stock OE replacement type.
OEM: 66210-85B
Measurements:
Length: 8"
Width: 4"
V-Twin Manufacturing Barnett Mikuni HS40 Throttle Cable, Black, 41 1996-up
VT-36-0728
Regular price $41.98Rubber rear battery strap.
OEM: 66111-93
Measurements:
Length: 6"
Width: 1"
V-Twin Manufacturing Barnett Throttle Cable, Black, 42.375"Casing, + 8 length, Stock 1996-up
VT-36-0718
Regular price $53.28Kit includes left and right upper and lower housings and accept stock switches for easy assembly.
OEM: 70222-96B
T
V-Twin Manufacturing 38" S&S Stainless Steel Braided Cable Set, 1996-up
VT-36-0129
Regular price $45.80Point cover seal
OEM: 11124
V-Twin Manufacturing 46" Stainless Steel Throttle and Idle Cable Set
VT-36-0128
Regular price $61.62Electric starter spring pinion gear
OEM: 33449-90
Tech Note:
Suggested to use with #14-0569 disc coupler o-ring
V-Twin Manufacturing Universal Throttle Cable by V-Twin, Black, 60", Barrel End
VT-36-0112
Regular price $19.54V-Twin Manufacturing Universal Throttle, Cable only, 43" Barrel end only, Single
VT-36-0104
Regular price $17.58Sign up for our mailing list to be the first to get great sales and promotional information.
We promise not to spam you!