V-Twin Manufacturing

Filter

Filter

Brand

clear
77 products

77 products

V-Twin Manufacturing Cylinder Head Support Adapters 7Pc
V-Twin Manufacturing
$132.25
V-Twin Manufacturing Valve Guide Drvr JIMS 3Pc Kit
V-Twin Manufacturing
$81.75
V-Twin Manufacturing Piston Ring Inst. Plier
V-Twin Manufacturing
$27.15
V-Twin Manufacturing Ring-O-Matic Ring CompressorKit
V-Twin Manufacturing
$199.91
V-Twin Manufacturing Cylinder Flex Hone Tool 3-7/16" - 3.5"
V-Twin Manufacturing
$93.75
V-Twin Manufacturing Rocker Arm Bush Ball Hone .554
V-Twin Manufacturing
$45.35
V-Twin Manufacturing Valve Grinding Stick
V-Twin Manufacturing
$23.94
V-Twin Manufacturing 4" Cylinder Flex Hone
V-Twin Manufacturing
$130.40
V-Twin Manufacturing 3 5-8-3 3-4 Cylinder Flex Hone
V-Twin Manufacturing
$122.18
V-Twin Manufacturing 4 1-4" Cylinder Flex Hone
V-Twin Manufacturing
$142.56
V-Twin Manufacturing Cylinder Hold Down Nuts
V-Twin Manufacturing
$29.71
V-Twin Manufacturing Valve Guide Drvr&Sckt Set 83Up
V-Twin Manufacturing
$45.33
V-Twin Manufacturing Conical Valve Spring Collar on all 2005-up BT, except S.E. models and all
V-Twin Manufacturing
$22.36
V-Twin Manufacturing 30-54BT Sprocket Shft Trng Tool
V-Twin Manufacturing
$36.24
V-Twin Manufacturing 1936-up Crankcase Main Bear. Lap Tool (C)
V-Twin Manufacturing
$746.81
V-Twin Manufacturing Valve Guide Drvr Tool Set
V-Twin Manufacturing
$33.65
V-Twin Manufacturing End Play Gauge 30-54BT
V-Twin Manufacturing
$72.50
Sold Out
V-Twin Manufacturing Replica XL Cylinder Base Nut-Head Bolt Wrench 9-16, 1957-85 XL
V-Twin Manufacturing
$25.82
V-Twin Manufacturing Combo Lapping Tool USA (A)
V-Twin Manufacturing
$983.05
V-Twin Manufacturing 1936-1977 1.870 Transmission Lapping Head Only
V-Twin Manufacturing
$136.62
V-Twin Manufacturing 1958-up Lapping Tool Engine Cutter 1.75"
V-Twin Manufacturing
$157.00
V-Twin Manufacturing Replica Connecting Rod Clamping Tool
V-Twin Manufacturing
$82.12
V-Twin Manufacturing Rod Lapping Tool
V-Twin Manufacturing
$331.01
V-Twin Manufacturing 1940-1954 Replacement Lap Head, Motor
V-Twin Manufacturing
$147.09
V-Twin Manufacturing 1954-1976 Sportster, 1955-1957 BT, 1929-1973 45" Replacement Lap Head, 1 3-8"
V-Twin Manufacturing
$149.43
V-Twin Manufacturing Replacement Lap Head, 1.300
V-Twin Manufacturing
$138.51
V-Twin Manufacturing Replacement Lap Head, 1 5-8" Rod
V-Twin Manufacturing
$185.64
V-Twin Manufacturing 1974 and 1980 BT Transmission Lap Head w-Pilot
V-Twin Manufacturing
$188.00
V-Twin Manufacturing 1957-1984 Transmission Lap Head w-Pilot
V-Twin Manufacturing
$175.57
V-Twin Manufacturing 1987-up Lap Head, 1.562"
V-Twin Manufacturing
$121.03
V-Twin Manufacturing Lap.Head Spanner Wrench
V-Twin Manufacturing
$18.48
V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1936-47 OHV
V-Twin Manufacturing
$23.64
V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1948-85 OHV
V-Twin Manufacturing
$17.16
V-Twin Manufacturing Valve Guide Seals, 1979-84
V-Twin Manufacturing
$34.04
V-Twin Manufacturing Sifton Lower Collar Seal Set, 1948-79
V-Twin Manufacturing
$54.12
V-Twin Manufacturing Cylinder Head Support Adapters 7Pc Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Cylinder Head Support Adapters 7Pc

VT-16-0651

$132.25

In Stock

Save $-132.25
/
Shipping calculated at checkout.
V-Twin Manufacturing Cylinder Head Support Adapters 7Pc - Sold Each
Cylinder Head Support Stand fits Evo, Shovelhead and Ironhead Sportsters. Adapters are to be used with a bar press and the stand included to push guides in and out in a straight line. Set includes stand and 6 adapters.
V-Twin Manufacturing Valve Guide Drvr JIMS 3Pc Kit Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Valve Guide Drvr JIMS 3Pc Kit

VT-16-0643

$81.75

In Stock

Save $-81.75
/
Shipping calculated at checkout.
V-Twin Manufacturing Valve Guide Drvr JIMS 3Pc Kit - Kit
Valve Guide Driver Tool Set. Three sizes of drift valve guides for Sportsters, 74's and 45 s. Includes 5/16 ?, 11/32 ?, and 3/8 ? valve guide drive. Type: Jims
V-Twin Manufacturing Piston Ring Inst. Plier Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Piston Ring Inst. Plier

VT-16-0628

$27.15

In Stock

Save $-27.15
/
Shipping calculated at checkout.
V-Twin Manufacturing Piston Ring Inst. Plier - Sold Each
Piston Ring Installer with Safety Stop insert ring ends in jaws, then expand gently and slip over Piston into groove. A simple time saving Tool.Wedge jaw handles 3/64 ? to 1/4 ?. Also removes rings without damage
V-Twin Manufacturing Ring-O-Matic Ring CompressorKit Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Ring-O-Matic Ring CompressorKit

VT-16-0622

$199.91

In Stock

Save $-199.91
/
Shipping calculated at checkout.
V-Twin Manufacturing Ring-O-Matic Ring CompressorKit - Kit
Ring-O-Matic Ring Compressor Tool Kit Ring-o-matic ring compressor tool kit Fits: All models UOM: 1 - KIT Country of Origin: USA
V-Twin Manufacturing Cylinder Flex Hone Tool 3-7/16" - 3.5" Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Cylinder Flex Hone Tool 3-7/16" - 3.5"

VT-16-0616

$93.75

In Stock

Save $-93.75
/
Shipping calculated at checkout.
V-Twin Manufacturing Cylinder Flex Hone Tool 3-7/16" - 3.5" - Sold Each
Cylinder Flex Hone Tool 3-7/16" - 3.5" cylinder flex hone tool has a overall length of 13-1/2 This flex hone tool is used to finish and deglaze block cylinders or liners. Fits: All models UOM: 1 - EA Country
V-Twin Manufacturing Rocker Arm Bush Ball Hone .554 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Rocker Arm Bush Ball Hone .554

VT-16-0612

$45.35

In Stock

Save $-45.35
/
Shipping calculated at checkout.
V-Twin Manufacturing Rocker Arm Bush Ball Hone .554 - Sold Each
Rocker Arm Bushing & Roller Bearing Puller for 1957-up Big Twin & XL. Replaces 95760-57. Item: .554 Ball Hone
V-Twin Manufacturing Valve Grinding Stick Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Valve Grinding Stick

VT-16-0604

$23.94

In Stock

Save $-23.94
/
Shipping calculated at checkout.
V-Twin Manufacturing Valve Grinding Stick - Sold Each
Valve Grinding Stick for hand grinding valves. Synthetic rubber vacuum cup is resistant to oil, grease and gasoline. 15/16 ? cup diameter.
V-Twin Manufacturing 4" Cylinder Flex Hone Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 4" Cylinder Flex Hone

VT-16-0576

$130.40

In Stock

Save $-130.40
/
Shipping calculated at checkout.
V-Twin Manufacturing 4" Cylinder Flex Hone - Sold Each
Cylinder Wall Flex Hone features silicone carbide globules which allow the deglazing of Cylinders 3 to 4 1/4 when powered by a 3/8 or larger drill,180 Grit. Bore: 4"
V-Twin Manufacturing 3 5-8-3 3-4 Cylinder Flex Hone Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 3 5-8-3 3-4 Cylinder Flex Hone

VT-16-0575

$122.18

In Stock

Save $-122.18
/
Shipping calculated at checkout.
V-Twin Manufacturing 3 5-8-3 3-4 Cylinder Flex Hone - Sold Each
Cylinder Wall Flex Hone features silicone carbide globules which allow the deglazing of Cylinders 3 to 4 1/4 when powered by a 3/8 or larger drill,180 Grit. Bore: 3 5/8
V-Twin Manufacturing 4 1-4" Cylinder Flex Hone Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 4 1-4" Cylinder Flex Hone

VT-16-0574

$142.56

In Stock

Save $-142.56
/
Shipping calculated at checkout.
V-Twin Manufacturing 4 1-4" Cylinder Flex Hone - Sold Each
Cylinder Wall Flex Hone features silicone carbide globules which allow the deglazing of Cylinders 3 to 4 1/4 when powered by a 3/8 or larger drill,180 Grit. Bore: 4 1/4"
V-Twin Manufacturing Cylinder Hold Down Nuts Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Cylinder Hold Down Nuts

VT-16-0446

$29.71

In Stock

Save $-29.71
/
Shipping calculated at checkout.
V-Twin Manufacturing Cylinder Hold Down Nuts - Set
Cylinder Hold Down Nuts are used to hold down Cylinders during service. Allows motor to be turned over with heads off. Use on all Twin Cam and Evo Twins. Set of 4.
V-Twin Manufacturing Valve Guide Drvr&Sckt Set 83Up Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Valve Guide Drvr&Sckt Set 83Up

VT-16-0422

$45.33

In Stock

Save $-45.33
/
Shipping calculated at checkout.
V-Twin Manufacturing Valve Guide Drvr&Sckt Set 83Up - Kit
Valve Guide Driver & Sockets install shoulderless 83-up XL & Evo guides to correct depth. Includes 3 sockets, 1 driver.
V-Twin Manufacturing Conical Valve Spring Collar on all 2005-up BT, except S.E. models and all Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Conical Valve Spring Collar on all 2005-up BT, except S.E. models and all

VT-16-0320

$22.36

In Stock

Save $-22.36
/
Shipping calculated at checkout.
V-Twin Manufacturing Conical Valve Spring Collar on all 2005-up BT, except S.E. models and all - Sold Each
Conical Valve Spring Collar add this to the Jims or Motorshop valve spring compressor Tool (96600-36B) to remove and replace valves and conical valve springs (Bee Hive) OEM 18245-02. A must have Tool for safe valve work. Use on all 200
V-Twin Manufacturing 30-54BT Sprocket Shft Trng Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 30-54BT Sprocket Shft Trng Tool

VT-16-0150

$36.24

In Stock

Save $-36.24
/
Shipping calculated at checkout.
V-Twin Manufacturing 30-54BT Sprocket Shft Trng Tool - Sold Each
Shaft Turning Tool fits spline or taper on assembled motor and allows engine to be turned over by ratchet or impact driver. Sifton unless noted. Years/ Type: 1930-54 Big Twin, Taper
V-Twin Manufacturing 1936-up Crankcase Main Bear. Lap Tool (C) Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1936-up Crankcase Main Bear. Lap Tool (C)

VT-16-0135

$746.81

In Stock

Save $-746.81
/
Shipping calculated at checkout.
V-Twin Manufacturing 1936-up Crankcase Main Bear. Lap Tool (C) - Sold Each
Lapping Tools used for precision alignment of engine and transmission shafts. Engine unit replaces 96710-40 to lap right and left crankcase races for oversized bearings. Transmission Tool insures proper fitting of oversized Roller
V-Twin Manufacturing Valve Guide Drvr Tool Set Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Valve Guide Drvr Tool Set

VT-16-0132

$33.65

In Stock

Save $-33.65
/
Shipping calculated at checkout.
V-Twin Manufacturing Valve Guide Drvr Tool Set - Set
Valve Guide Driver Tool Set. Three sizes of drift valve guides for Sportsters, 74's and 45 s. Includes 5/16 ?, 11/32 ?, and 3/8 ? valve guide drive. Type: V-Twin
V-Twin Manufacturing End Play Gauge 30-54BT Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing End Play Gauge 30-54BT

VT-16-0131

$72.50

In Stock

Save $-72.50
/
Shipping calculated at checkout.
V-Twin Manufacturing End Play Gauge 30-54BT - Sold Each
1930-54 BT Flywheel End Play Gauge.
V-Twin Manufacturing Combo Lapping Tool USA (A) Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Combo Lapping Tool USA (A)

VT-16-0039

$983.05

In Stock

Save $-983.05
/
Shipping calculated at checkout.
V-Twin Manufacturing Combo Lapping Tool USA (A) - Sold Each
Lapping Tools used for precision alignment of engine and transmission shafts. Engine unit replaces 96710-40 to lap right and left crankcase races for oversized bearings. Transmission Tool insures proper fitting of oversized Roller
V-Twin Manufacturing 1936-1977 1.870 Transmission Lapping Head Only Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1936-1977 1.870 Transmission Lapping Head Only

VT-16-0034

$136.62

In Stock

Save $-136.62
/
Shipping calculated at checkout.
V-Twin Manufacturing 1936-1977 1.870 Transmission Lapping Head Only - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1.870 Trans. 36-77 Big Twin
V-Twin Manufacturing 1958-up Lapping Tool Engine Cutter 1.75" Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1958-up Lapping Tool Engine Cutter 1.75"

VT-16-0032

$157.00

In Stock

Save $-157.00
/
Shipping calculated at checkout.
V-Twin Manufacturing 1958-up Lapping Tool Engine Cutter 1.75" - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1 3/4 Motor 1958-up Big Twin
V-Twin Manufacturing Replica Connecting Rod Clamping Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Replica Connecting Rod Clamping Tool

VT-16-0029

$82.12

In Stock

Save $-82.12
/
Shipping calculated at checkout.
V-Twin Manufacturing Replica Connecting Rod Clamping Tool - Sold Each
Rod Clamping Tool allows rod to be held for straightening or to replace wrist pin bushing. Bushing Piston Pin Tool will remove and install bronze bushing. Tool/Brand: Clamping Tool V-Twin
V-Twin Manufacturing Rod Lapping Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Rod Lapping Tool

VT-16-0027

$331.01

In Stock

Save $-331.01
/
Shipping calculated at checkout.
V-Twin Manufacturing Rod Lapping Tool - Sold Each
Rod Lapping Tool includes arbor assembly 1.500 lap for 45 , Indian, and some case races, 1.625 lap for Big Twin, Sportster and K Model rods. Item: Rod Tool
V-Twin Manufacturing 1940-1954 Replacement Lap Head, Motor Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1940-1954 Replacement Lap Head, Motor

VT-16-0026

$147.09

In Stock

Save $-147.09
/
Shipping calculated at checkout.
V-Twin Manufacturing 1940-1954 Replacement Lap Head, Motor - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1 1/2 Motor 40-54 Big Twin
V-Twin Manufacturing 1954-1976 Sportster, 1955-1957 BT, 1929-1973 45" Replacement Lap Head, 1 3-8" Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1954-1976 Sportster, 1955-1957 BT, 1929-1973 45" Replacement Lap Head, 1 3-8"

VT-16-0025

$149.43

In Stock

Save $-149.43
/
Shipping calculated at checkout.
V-Twin Manufacturing 1954-1976 Sportster, 1955-1957 BT, 1929-1973 45" Replacement Lap Head, 1 3-8" - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1 3/8 Motor 54-76 Sportster 55-57 Big Twin 29-73 45
V-Twin Manufacturing Replacement Lap Head, 1.300 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Replacement Lap Head, 1.300

VT-16-0024

$138.51

In Stock

Save $-138.51
/
Shipping calculated at checkout.
V-Twin Manufacturing Replacement Lap Head, 1.300 - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1.300 Trans. Sportster
V-Twin Manufacturing Replacement Lap Head, 1 5-8" Rod Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Replacement Lap Head, 1 5-8" Rod

VT-16-0022

$185.64

In Stock

Save $-185.64
/
Shipping calculated at checkout.
V-Twin Manufacturing Replacement Lap Head, 1 5-8" Rod - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1 5/8 Rod Big Twin XL
V-Twin Manufacturing 1974 and 1980 BT Transmission Lap Head w-Pilot Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1974 and 1980 BT Transmission Lap Head w-Pilot

VT-16-0020

$188.00

In Stock

Save $-188.00
/
Shipping calculated at checkout.
V-Twin Manufacturing 1974 and 1980 BT Transmission Lap Head w-Pilot - Kit
Trans. Lap Head includes pilot. For Eastern Tool only. Size/Model: 1.870 BT 74 & 80
V-Twin Manufacturing 1957-1984 Transmission Lap Head w-Pilot Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1957-1984 Transmission Lap Head w-Pilot

VT-16-0019

$175.57

In Stock

Save $-175.57
/
Shipping calculated at checkout.
V-Twin Manufacturing 1957-1984 Transmission Lap Head w-Pilot - Kit
Trans. Lap Head includes pilot. For Eastern Tool only. Size/Model: 1.300 1957-85 Sportster
V-Twin Manufacturing 1987-up Lap Head, 1.562" Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1987-up Lap Head, 1.562"

VT-16-0018

$121.03

In Stock

Save $-121.03
/
Shipping calculated at checkout.
V-Twin Manufacturing 1987-up Lap Head, 1.562" - Sold Each
Replacement Lapheads are sold each. For Eastern Tool only. Pilot# /Type /Fits: 1.562 Motor 87-up Sportster
V-Twin Manufacturing Lap.Head Spanner Wrench Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Lap.Head Spanner Wrench

VT-16-0012

$18.48

In Stock

Save $-18.48
/
Shipping calculated at checkout.
V-Twin Manufacturing Lap.Head Spanner Wrench - Sold Each
Lapping Tools used for precision alignment of engine and transmission shafts. Engine unit replaces 96710-40 to lap right and left crankcase races for oversized bearings. Transmission Tool insures proper fitting of oversized Roller
V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1936-47 OHV Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1936-47 OHV

VT-15-0297

$23.64

In Stock

Save $-23.64
/
Shipping calculated at checkout.
V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1936-47 OHV - Pack

Over head valve guide gasket

OEM: 18265-37


EL 1936-1940
FL 1941-1947
V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1948-85 OHV Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1948-85 OHV

VT-15-0210

$17.16

In Stock

Save $-17.16
/
Shipping calculated at checkout.
V-Twin Manufacturing Gary Bang Valve Guide Gasket, 1948-85 OHV - Pack

Valve guide gasket

OEM: 18196-51


FL 1948-1984
FX 1971-1984
V-Twin Manufacturing Valve Guide Seals, 1979-84 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Valve Guide Seals, 1979-84

VT-14-0146

$34.04

In Stock

Save $-34.04
/
Shipping calculated at checkout.
V-Twin Manufacturing Valve Guide Seals, 1979-84 - Pack

K-line seals are solid teflon and a steel band to secure the seal to the guide.

OEM: 18000-81


FL 1979-1984
FX 1979-1984
FLT 1979-1983
FXR 1982-1983

Tech Note:

Installation tools and plastic 10 pack sleeves available

V-Twin Manufacturing Sifton Lower Collar Seal Set, 1948-79 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Sifton Lower Collar Seal Set, 1948-79

VT-11-0874

$54.12

In Stock

Save $-54.12
/
Shipping calculated at checkout.
V-Twin Manufacturing Sifton Lower Collar Seal Set, 1948-79 - Set

Sifton lower valve collar set includes 4 seals to use with stock style guides.
Order guides separately.


FL 1948-1979
FX 1971-1979