All

48 products

48 products

BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa
Belt Drives Ltd.
$46.95
Sold Out
Belt Tension Gauge,Use To Check Tension On Secondary Belt Rpls 40006-85 Or 35381
Mid-USA
$28.50
Sold Out
Main Dr Gear & Bearing Tool BT 5 Spd Spt & Buell 5 Spd* R&R Gear & Brg Jims 35316-80
Mid-USA
$371.60
Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005
Mid-USA
$99.55
Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256
Mid-USA
$177.50
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981
Mid-USA
$497.70
Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84
Mid-USA
$363.55
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315
Mid-USA
$80.95
Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316
Mid-USA
$45.50
Primary Drive Lock Tool Touring Models 07/L* Jims 2312
Mid-USA
$84.95
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A
Mid-USA
$207.10
Sold Out
Shifter Tool,Fork Align Gauge Big Twin 1936/Early 1979 Replaces Hd 96384-39
Mid-USA
$193.15
Sold Out
Trans Main Bearing Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 987
Mid-USA
$320.90
Sold Out
Trans Pulley Nut Socket 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 989
Mid-USA
$284.70
Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189
Mid-USA
$126.70
Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050
Mid-USA
$70.60
V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer
V-Twin Manufacturing
$78.38
V-Twin Manufacturing 1937-1984 4-Speed BT 4th Gear Nut Tool
V-Twin Manufacturing
$54.53
V-Twin Manufacturing 1940-up BT M.S.Ball Bear Locknut Socket Wrench
V-Twin Manufacturing
$23.86
V-Twin Manufacturing 1977-1984 Countershaft Bearing Install
V-Twin Manufacturing
$23.86
V-Twin Manufacturing 1979-up Main Drive Gear Seal Press Tool
V-Twin Manufacturing
$39.87
V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool
V-Twin Manufacturing
$351.28
V-Twin Manufacturing 1984-1990 Transmission Mainshaft Bearing, Install
V-Twin Manufacturing
$49.88
V-Twin Manufacturing 1984-up Fork Bushing & Seal Install
V-Twin Manufacturing
$39.62
V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool
V-Twin Manufacturing
$75.05
V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool
V-Twin Manufacturing
$43.93
V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL
V-Twin Manufacturing
$32.60
V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar
V-Twin Manufacturing
$53.00
V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85
V-Twin Manufacturing
$236.64
V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84
V-Twin Manufacturing
$212.77
V-Twin Manufacturing BT Cam Shft Needle Bear Inst Rod 58-Up
V-Twin Manufacturing
$23.55
V-Twin Manufacturing BT Ms Browng Rce Tool JIMS
V-Twin Manufacturing
$343.72
V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT
V-Twin Manufacturing
$15.86
Sold Out
V-Twin Manufacturing JIMS 36-78 Shft Fork Gauge
V-Twin Manufacturing
$192.50
V-Twin Manufacturing JIMS 5-Speed Main Drive Gear Seal Installer
V-Twin Manufacturing
$155.36
BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa Garage and Shop Belt Drives Ltd. - K and G Cycles
Belt Drives Ltd.

BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa

DS-38010240

$46.95

In Stock

Save $-46.95
/
Shipping calculated at checkout.
BELT DRIVES LTD. Ring Gear Lock Tool, made in the usa
  • For use on all BDL open belt drive kits
  • Choose the appropriate side of the tool for your kit; one side is for open belt drives up to 06 models and the smaller, reverse side is for open belt drive kits for 07-16 models
  • Made in the U.S.A.
Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005

MID-70419

$99.55

In Stock

Save $-99.55
/
Shipping calculated at checkout.
Main Drive Gear Bushing Tool Drive Gear Bt 4 Spd 1936/Later Install/Remove Bushing....1005
Jims
Used to remove and install main drive gear bushings on Big Twin 1936/Later with 4 speed transmissions
Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256

MID-70433

$177.50

In Stock

Save $-177.50
/
Shipping calculated at checkout.
Main Drive Gear Seal Installer Bt 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256
  • Reduces the possibilities of leaks or misalignment
  • Used while the transmission is assembled, this tool sets the proper seal depth and has a protective sleeve for the seal
  • A must for any shop
Jims
or use on Big Twin 5 speed 1980/Later
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981

MID-70406

$497.70

In Stock

Save $-497.70
/
Shipping calculated at checkout.
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981
  • Safely install a new or newly repaired main drive gear
  • Job can be performed with the transmission still in the frame
  • Holds the main drive gear square to Fits bearing bore, eliminating any marring of gear or bearings
Jims
Main Gear Installer Tool
or use on Dyna 2006/Later, L & XST 2007/Later
Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84

MID-70434

$363.55

In Stock

Save $-363.55
/
Shipping calculated at checkout.
Mainshaft Brng Inner Race Tool Bt L84/L* Removes & Replaces Pressed On Race Jims 34902-84
  • Designed to remove and install the pressed-on bearing inner race on the transmission mainshaft
  • Works on the bike or on the work bench
Jims
Fits all Big Twin Late 1984/Later
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315

MID-70410

$80.95

In Stock

Save $-80.95
/
Shipping calculated at checkout.
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits Dyna 2006/Later & XST 2007/Later 6 speeds
Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316

MID-70417

$45.50

In Stock

Save $-45.50
/
Shipping calculated at checkout.
Primary Drive Lock Bar Tool Bt 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits all Big Twin 4 speed, Softail models & Dyna models all years
Primary Drive Lock Tool Touring Models 07/L* Jims 2312 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Tool Touring Models 07/L* Jims 2312

MID-70411

$84.95

In Stock

Save $-84.95
/
Shipping calculated at checkout.
Primary Drive Lock Tool Touring Models 07/L* Jims 2312
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits Touring models 2007/Later 6 speeds
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A

MID-70414

$207.10

In Stock

Save $-207.10
/
Shipping calculated at checkout.
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A
Gauge is used to set and align shift forksJims
or Big Twin 4 speed Late 1979/Later
Replaces HD# 96385-78A
Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189

MID-70404

$126.70

In Stock

Save $-126.70
/
Shipping calculated at checkout.
Trn Shaft Installer Tool Bt 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189
  • Pulls the transmission shafts into the access door without the use of a hydraulic or arbor press
Jims
or use on Big Twin 5 Speed 1980/Later
Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050

MID-70439

$70.60

In Stock

Save $-70.60
/
Shipping calculated at checkout.
Trn Stud Installation Tool Bt 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050
Use to easily install transmission mounting studs on Big Twins with solid mount transmissions. Features a ball bearing end on the jam stud that eliminates any possibility of stud damage. Can be used to install any 3/8-24 stud. Includes instructions. Jims
Installation Tool
Fits Big Twin 4 speed 1936/Later & Softail 5 speed 1986/1999
V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer

VT-16-0719

$78.38

In Stock

Save $-78.38
/
Shipping calculated at checkout.
V-Twin Manufacturing 1936-1986 JIMS Tran Stud Installer - Sold Each
Big Trans Stud Installer Tool for 1936-86 4 and 5-Speed Softail.
V-Twin Manufacturing 1937-1984 4-Speed BT 4th Gear Nut Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1937-1984 4-Speed BT 4th Gear Nut Tool

VT-16-0114

$54.53

In Stock

Save $-54.53
/
Shipping calculated at checkout.
V-Twin Manufacturing 1937-1984 4-Speed BT 4th Gear Nut Tool - Sold Each
Big Twin Countershaft Sprocket Nut Tool is a factory style forged Tools. Includes handle. Models/ Use: 1937-84 4-Speed BT 4th Gear Sprocket Nut
V-Twin Manufacturing 1940-up BT M.S.Ball Bear Locknut Socket Wrench Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1940-up BT M.S.Ball Bear Locknut Socket Wrench

VT-16-0116

$23.86

In Stock

Save $-23.86
/
Shipping calculated at checkout.
V-Twin Manufacturing 1940-up BT M.S.Ball Bear Locknut Socket Wrench - Sold Each
Mainshaft Ball Bearing Lock Nut Wrench replaces 94635-41A. Fits 1940-up Big Twin models. Handle is not included.
V-Twin Manufacturing 1977-1984 Countershaft Bearing Install Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1977-1984 Countershaft Bearing Install

VT-16-0057

$23.86

In Stock

Save $-23.86
/
Shipping calculated at checkout.
V-Twin Manufacturing 1977-1984 Countershaft Bearing Install - Sold Each
Needle Bearing Bushing Race Press Tools. Fits /Item/ Use: 1977-84 BT Needle Countershaft
V-Twin Manufacturing 1979-up Main Drive Gear Seal Press Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1979-up Main Drive Gear Seal Press Tool

VT-16-0036

$39.87

In Stock

Save $-39.87
/
Shipping calculated at checkout.
V-Twin Manufacturing 1979-up Main Drive Gear Seal Press Tool - Sold Each
Mainshaft/Drive Bearing Press Tools. Fits/ Press: 79-90 BT 5-spdSeal
V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool

VT-16-0994

$351.28

In Stock

Save $-351.28
/
Shipping calculated at checkout.
V-Twin Manufacturing 1980-up JIMS 5-Speed Mn Dr Gear Browng Tool - Sold Each
Jims 5-Speed Transmission Main Drive Gear Tools. Use 16-0994 to remove and install main drive gear and install main bearing. Use 16-0718 for remove main drive bearing. Both Tools can be used without removing transmission case. Use
V-Twin Manufacturing 1984-1990 Transmission Mainshaft Bearing, Install Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1984-1990 Transmission Mainshaft Bearing, Install

VT-16-0028

$49.88

In Stock

Save $-49.88
/
Shipping calculated at checkout.
V-Twin Manufacturing 1984-1990 Transmission Mainshaft Bearing, Install - Sold Each
Mainshaft/Drive Bearing Press Tools. Fits/ Press: 1984-90 XL Drive
V-Twin Manufacturing 1984-up Fork Bushing & Seal Install Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 1984-up Fork Bushing & Seal Install

VT-16-0056

$39.62

In Stock

Save $-39.62
/
Shipping calculated at checkout.
V-Twin Manufacturing 1984-up Fork Bushing & Seal Install - Sold Each
Needle Bearing Bushing Race Press Tools. Fits /Item/ Use: 84-up FLT Fork Bushing & Seal FXWG-FXST
V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool

VT-16-0821

$75.05

In Stock

Save $-75.05
/
Shipping calculated at checkout.
V-Twin Manufacturing 36-Up B-T 4&5-Speed Counter Sprocket Nut Tool - Sold Each
Countershaft Sprocket Lock Nut Wrench features an extra long two piece design Inner collar which will retain wrench to nut. Fits 1936-up Big Twins, 1 7/8 hex, 4 and 5 speed models. Brand: V-Twin
V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool

VT-16-0118

$43.93

In Stock

Save $-43.93
/
Shipping calculated at checkout.
V-Twin Manufacturing 41-84BT Drum-Hub Locking Tool - Sold Each
Clutch Drum Locking Tools for removing Clutch hub and motor nuts. Year/ Model: 1941-84 Big Twin
V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL

VT-16-1767

$32.60

In Stock

Save $-32.60
/
Shipping calculated at checkout.
V-Twin Manufacturing 5-Speed In+Out Needle Browng Tool XL - Sold Each
Mainshaft/Drive Bearing Press Tools. Fits/ Press: 1991-up BT-XL Drive
V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar

VT-16-0682

$53.00

In Stock

Save $-53.00
/
Shipping calculated at checkout.
V-Twin Manufacturing 91-Up XL JIMS Primary Locking Bar - Sold Each
Primary Locking Bars use to lock Primary for servicing. Use: 1991-up Sportster & Buell
V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85

VT-16-1798

$236.64

In Stock

Save $-236.64
/
Shipping calculated at checkout.
V-Twin Manufacturing Adjustable Reamer BT Main Dr Gear 41-85 - Sold Each
Adjustable Reamers use to fit I.D. on new bushings. Years /Fits: 1941-85 BT Main Drive Gear
V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84 Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84

VT-16-1799

$212.77

In Stock

Save $-212.77
/
Shipping calculated at checkout.
V-Twin Manufacturing Adjustable Reamer Kicker Shaft BT+XL 36-84 - Sold Each
Adjustable Reamers use to fit I.D. on new bushings. Years /Fits: 1936-84 BT-XL Kicker Shaft
V-Twin Manufacturing BT Cam Shft Needle Bear Inst Rod 58-Up Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing BT Cam Shft Needle Bear Inst Rod 58-Up

VT-16-0126

$23.55

In Stock

Save $-23.55
/
Shipping calculated at checkout.
V-Twin Manufacturing BT Cam Shft Needle Bear Inst Rod 58-Up - Sold Each
Needle Bearing Bushing Race Press Tools. Fits /Item/ Use: 1958-up BT Needle Cam
V-Twin Manufacturing BT Ms Browng Rce Tool JIMS Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing BT Ms Browng Rce Tool JIMS

VT-16-0877

$343.72

In Stock

Save $-343.72
/
Shipping calculated at checkout.
V-Twin Manufacturing BT Ms Browng Rce Tool JIMS - Sold Each
Jims Big Twin Mainshaft Primary Bearing Race Remover & Installer for use on all 1984-up Big Twins, replaces 34902.
V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT

VT-16-0711

$15.86

In Stock

Save $-15.86
/
Shipping calculated at checkout.
V-Twin Manufacturing Chrome Needle Bushing Tool 70Up BT - Sold Each
Needle Bearing Bushing Race Press Tools. Fits /Item/ Use: 1970-up BT Bushing Cam
V-Twin Manufacturing JIMS 5-Speed Main Drive Gear Seal Installer Garage and Shop V-Twin Manufacturing - K and G Cycles
V-Twin Manufacturing

V-Twin Manufacturing JIMS 5-Speed Main Drive Gear Seal Installer

VT-16-0664

$155.36

In Stock

Save $-155.36
/
Shipping calculated at checkout.
V-Twin Manufacturing JIMS 5-Speed Main Drive Gear Seal Installer - Sold Each
Sprocket Shaft Seal Installer use this kit to install Sprocket shaft seal to proper depth, and for holding the seal perfectly square, for a no leak fit. Driver sold separately, order 16-0664. Use: Driver Set