All

Filter

Filter

Brand

clear
15 products

15 products

Sold Out
Belt Tension Gauge,Use To Check Tension On Secondary Belt Rpls 40006-85 Or 35381
Mid-USA
$28.50
Sold Out
Main Dr Gear & Bearing Tool BT 5 Spd Spt & Buell 5 Spd* R&R Gear & Brg Jims 35316-80
Mid-USA
$371.60
Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005
Mid-USA
$99.55
Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256
Mid-USA
$177.50
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981
Mid-USA
$497.70
Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84
Mid-USA
$363.55
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315
Mid-USA
$80.95
Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316
Mid-USA
$45.50
Primary Drive Lock Tool Touring Models 07/L* Jims 2312
Mid-USA
$84.95
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A
Mid-USA
$207.10
Sold Out
Shifter Tool,Fork Align Gauge Big Twin 1936/Early 1979 Replaces Hd 96384-39
Mid-USA
$193.15
Sold Out
Trans Main Bearing Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 987
Mid-USA
$320.90
Sold Out
Trans Pulley Nut Socket 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 989
Mid-USA
$284.70
Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189
Mid-USA
$126.70
Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050
Mid-USA
$70.60
Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Bushing Tool Drive Gear BT 4 Spd 1936/Later Install/Remove Bushing....1005

MID-70419

$99.55

In Stock

Save $-99.55
/
Shipping calculated at checkout.
Main Drive Gear Bushing Tool Drive Gear Bt 4 Spd 1936/Later Install/Remove Bushing....1005
Jims
Used to remove and install main drive gear bushings on Big Twin 1936/Later with 4 speed transmissions
Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Seal Installer BT 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256

MID-70433

$177.50

In Stock

Save $-177.50
/
Shipping calculated at checkout.
Main Drive Gear Seal Installer Bt 5 Spd 80/L* Sets Depth & Protects Seal Lip Jims..2256
  • Reduces the possibilities of leaks or misalignment
  • Used while the transmission is assembled, this tool sets the proper seal depth and has a protective sleeve for the seal
  • A must for any shop
Jims
or use on Big Twin 5 speed 1980/Later
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981

MID-70406

$497.70

In Stock

Save $-497.70
/
Shipping calculated at checkout.
Main Drive Gear Tool, 6-Spd Twin Cam 07/L* Dyna 06/L* Jims 981
  • Safely install a new or newly repaired main drive gear
  • Job can be performed with the transmission still in the frame
  • Holds the main drive gear square to Fits bearing bore, eliminating any marring of gear or bearings
Jims
Main Gear Installer Tool
or use on Dyna 2006/Later, L & XST 2007/Later
Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Mainshaft Brng Inner Race Tool BT L84/L* Removes & Replaces Pressed On Race Jims 34902-84

MID-70434

$363.55

In Stock

Save $-363.55
/
Shipping calculated at checkout.
Mainshaft Brng Inner Race Tool Bt L84/L* Removes & Replaces Pressed On Race Jims 34902-84
  • Designed to remove and install the pressed-on bearing inner race on the transmission mainshaft
  • Works on the bike or on the work bench
Jims
Fits all Big Twin Late 1984/Later
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315

MID-70410

$80.95

In Stock

Save $-80.95
/
Shipping calculated at checkout.
Primary Drive Lock Bar Dyna 06/L* Softail 07/L* Jims 2315
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits Dyna 2006/Later & XST 2007/Later 6 speeds
Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Bar Tool BT 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316

MID-70417

$45.50

In Stock

Save $-45.50
/
Shipping calculated at checkout.
Primary Drive Lock Bar Tool Bt 4 Spd St Dyna All Yrs* Sprocket To Sprocket Jims.2316
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits all Big Twin 4 speed, Softail models & Dyna models all years
Primary Drive Lock Tool Touring Models 07/L* Jims 2312 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Primary Drive Lock Tool Touring Models 07/L* Jims 2312

MID-70411

$84.95

In Stock

Save $-84.95
/
Shipping calculated at checkout.
Primary Drive Lock Tool Touring Models 07/L* Jims 2312
Avoid damage to the primary driveline with one of these steel primary drive locking bars. Depending on application, use these tools to lock the clutch sprocket to the engine sprocket when the clutch or engine nuts are loosened or tightened. This will allow the proper use of a torque wrench. Saves time and money.

Note: Never use an impact wrench or loosening of the alternator magnets might occur.Jims
Fits Touring models 2007/Later 6 speeds
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A

MID-70414

$207.10

In Stock

Save $-207.10
/
Shipping calculated at checkout.
Shift Fork Alignment Gauge Big Twin 4 Spd Late 1979/Later Replaces Hd 96385-78A
Gauge is used to set and align shift forksJims
or Big Twin 4 speed Late 1979/Later
Replaces HD# 96385-78A
Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trn Shaft Installer Tool BT 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189

MID-70404

$126.70

In Stock

Save $-126.70
/
Shipping calculated at checkout.
Trn Shaft Installer Tool Bt 5 Spd 80/L* Pulls Shafts Into Access Door Jims.2189
  • Pulls the transmission shafts into the access door without the use of a hydraulic or arbor press
Jims
or use on Big Twin 5 Speed 1980/Later
Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050 Garage and Shop Mid-USA - K and G Cycles
Mid-USA

Trn Stud Installation Tool BT 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050

MID-70439

$70.60

In Stock

Save $-70.60
/
Shipping calculated at checkout.
Trn Stud Installation Tool Bt 4 Spd 36/L St 86/99 Instals Bottom My Case Studs Jims.1050
Use to easily install transmission mounting studs on Big Twins with solid mount transmissions. Features a ball bearing end on the jam stud that eliminates any possibility of stud damage. Can be used to install any 3/8-24 stud. Includes instructions. Jims
Installation Tool
Fits Big Twin 4 speed 1936/Later & Softail 5 speed 1986/1999