V-Twin Manufacturing Generator-Alternator 12V Conversion Kit XL

Compact generator alternator conversion kit replaces original generator and regulator. The 2 short wires from the regulators go to alternator termincals long wire. Includes chrome alternator and regulator.
Stronger than stock, features billet housing for accurate alignment and a stress proof shaft. Alternators have 5/16" x 24 mount holes for screws. 13T drive gears are for all Big Twins, and 14T is for all Sportsters! Kit can be used on 1957-1983 XL and 1941-1969 FL models if the generator bolt holes in cases are drilled to 5/16". Use HeliCoil kit to convert 12 volt generators with 5/16-24 thread to 1/4-24 thread to accept early mount bolt set.

*NOTE: It is recommended that holes on pre-1958 FL and G models be enlarged to 5/16" to accept the larger screws. As the 2-brush type generators and the 32E alternators do not use a strap.

*NOTE: Black finned Regulator is not built-in and must be mounted remotely. Cannot be used with mini battery (12N55A-3B).

*NOTE: Order mount screws, gasket and gear kit for specific application.

*NOTE: The outer cover with the large hex nut houses the rotor magnets, which are encase in a stainless steel shell. This "rotor" turns when th engine is running.

FL 1941-1969
G 1936-1973
XL 1958-1982
W 1936-1952